Small Scale Poduction Plant Corn Oil Plant

Small Scale Poduction Plant Corn Oil Plant

Rice bran oil content is about 21%,in order to get high yield and high quality rice bran oil,we usually adapt to solvent extraction with extruder machine,while if the capacity s too small,such as 1-20t/d,it could adapt to mechnical pressing method.

Small Scale Poduction Plant Corn Oil Plant

Small Scale Poduction Plant Corn Oil Plant operating principle:

When oil press operating, the prepared materials enter the pressing chamber from the hopper and then move forwards by the rotating of pressing screw and is pressed under the high-pressure condition in the chamber, friction between material and chamber will be created, which also created friction and relative movement among material particles, on the other hand, root diameter of the pressing screw carries larger from one end to the other. hence, when rotating, it not only pushed particles moving forwards but also turns them outwards as well, meanwhile, particles adjacent the screw will rotation along with screw’ rotating, causing every particle inside the chamber to possess different speed, therefore relative movement among particle creates heat which is necessary during manufacturing. because of helping protein change property, damage colloid, increase plasticity, decrease oil’s elasticity, resulting in high oil productivity.

Rice bran oil has rich FFA,Gums,and more impurity,it have to refine and then to eat.

Mini rice bran oil mill plant about refinery:

Small Scale Poduction Plant Corn Oil Plant main process:

Step 1.Degumming with water to remove the easily hydratable phospholipids and metals.

Step 2.Addition of a small amount of phosphoric or citric acid to convert the remaining non-hydralable phospholipids (Ca, Mg salts) into hydratable phospholipids.

Step 3.Neutralising of the free fatty acids with a slight excess of sodium hydroxide solution, followed by the washing out of soaps and hydrated phospholipids.

Step 4.Bleaching with natural or acid-activated clay minerals to adsorb colouring components and to decompose hydroperoxides.

Step 5.Deodorising to remove volatile components, mainly aldehydes and ketones, with low threshold values for detection by taste or smell. Deodorisation is essentially a steam distillation process carried out at low pressures (2-6 mbar) and elevated temperatures (180-220°C).

High quality Small Scale Poduction Plant Corn Oil Plant adapt to many materials:

Our main business:

• 10-500T/H oil material first cleaning,drying and storage section turn-key project.
• 100-3000 T/D oil pretreatment, shelling and pre-press workshop turnkey project (soybean hot peeling, bean skin crushing; the soybean extrusion, high oil contained pre-press cake extrusion, and high oil contained embryos puffed; of direct puffed). Rice bran production line turn-key project.
• Leaching workshop turnkey project (Towline extractor, Rotocel extractor, loop type extractor, DTDC separated machine, the full negative pressure evaporation, paraffin wax recovery, leaching workshop degum, phospholipid concentrate).
• 30-1000T/D oil continuous grade two or one physical (chemical) refining production line.
• 10-600T/D sunflower oil, rice bran oil, corn germ oil dewaxing turn-key project
• 10-200T/D Fatty acid esterification production cooking oil production line.

1. How can I get your quotation or project?

Please tell me your flowing information:

Ø What is your raw material?Sunflower,soybean,coconut,peanut,rapeseed or other?

Ø How much raw material do you want to process per day or per hour?

Ø Do you need crude oil or refined oil?

2. How can I believe in your company?

We have more than 30years in all kinds of vegetable oil material machine production,and we have all kinds of production certificates,such CE,BV,ISO9001 and more,please visit our web:www.LDemach.com,and you will know more of us.

3. What is your sales-after services?

Please don’t worry,dear,if we have chance to cooperate with each other,once we signed the contract,we will build special project service team for you,from the drawing to the production,we will have special workers for all process tracking.And we will arrange our special engineers to go your project site for installation and guidance.

4. What is your MOQ?

At the moment,about the quantity,we have no special requirements,even if you just order one sets,we will do our best for you.

5. What is material of your machine?

Usually,the parts which contact with oil directly and the important are stainless steel,other part is carbon steel or Si-Mn steel and other.And we can design it according to your requirements.

Such Our machine is of high quality, such as valves from Siemens, bearings from SKF,gear box from SEW, etc.. Automatic welding machine, X-ray test machine, steel rolling machine and others are equipped completely, which won customers’ trust from Europe, America, Mideast, Romania, etc.