Hot sale groundnut oil refining products made in China

Seed Hydraulic Press Machine operating principle:
1.When oil press is on work, material enters the extruding chamber from the hopper and then moves forwards by the rotating pressing screw and is pressed.
2.Under hightemperature condition in the chamber, there is quite strong friction among press screw, chamber and the oil materials.
3.On the other hand, root diameter of the pressing screw carries larger from one end to the other.
4.Hence when rotating, the thread not only pushes particles moving forwards but also turns them outwards as well.
5.Meanwhile, particles adjacent the screw will rotate along with screw’s rotating, causing every particle inside the chamber to possess different speed.
6.Therefore, relative movement among particles creates neat which is necessary during manufacturing because of helping protein change property, damage colloid, increase plasticity, decrease oil’s elasticity, resulting in high oil.

More than 30 years including 5 years overseas market experience of designing and installing complete Seed Hydraulic Press Machine,Shandong Leader Machinery Co.,Ltd. are now a leading company in Hot sale groundnut oil refining products made in China field.
Shandong Leader Machinery Co.,Ltd. supply various Seed Hydraulic Press Machine and connected equipments :
(1) High oil yield,obvious economic benefit .
(2) Lower residual oil rate in the dry meal .
(3) Improving the quality of the meal .
(4) Low processing cost , high productivity.
(5) Saving energy,saving labor.

Hot sale groundnut oil refining products made in China

Product Description

Technological process flowchart:

groundnut oil refinery machine introduction:

Alkali hot water

Crude oil→filter→mix→reactor→mix→reactor→centrifugal separation→oil residue

↑ ↓

Phosphoric acid hot water→mix ↓

↓ ↓

degumming oil←cooler←dry←centrifuge separation←mix←alkali liquor

↓

↓

bleaching earth→mix→decoloring→filter→decoloring oil→mix→heat

↓

refined oil←filter←cool←deodorizing←vacuum

groundnut oil refinery machine process:

(1)Degumming process

A.The purpose of degumming is to remove the phospholipid, sugar, protein, trace mental,

and some other impurities, which have bad effect on the stability of the oil. First, the oil

should be heated to 90to105°C, then put some phosphoric into it and stir. It mainly transfer

the phospholipid to that can be compatible with water. Then add some salt water to gather

the impurities, which subside to the bottom and be discharged.

B.Deacidification

Add some certain quantity of alkali to neutralize the free fatty acids. During this process, some

soapstock will be produced.The soapstock will be separated from the oil after using the centrifugal

machine.

(2)Decolorization

A.Mix the oil with activated clay in the oil soil mixing tank, and 1 ton oil needs 5kg clay. Then

stir it 10 minutes at 10°C. Next, pump the mixed oil into the decolorization tower. It use

steam to heat the mixed oil at 100°C, and the process lasts 30-40 minutes.

B.Filter

The filter capacity can reach 200meshes. First, we use the filter to remove the clay in the oil,

then use the bad filter to purify the oil again. The diameter of the filtering can reach 5μm.

(3)Deodorization

The main purpose of deordorization tower is to remove fatty acid and some odor material.

The principle of the deordorization is to use the high temperature and vacuum to remove

the odor. The fatty acid and odor will be stalled in the storage tank.

(4)Automatic Control System

Our company has applied the automatic control system with advancedness, security, reliability

into the pretreatment, extraction, refining and fractionation in large oil plants. For its application

in automatic control system, it can control the production in the entire workshop and monitor the operational status of each device by controlling the computer terminals in the room. One person

only can operate the entire workshop, with efficient production management. It has reduced the production cost greatly and improved the management efficiency.

groundnut oil refinery machine advantage:

1.By combining several years' practical experience, adopting a kind of unique deguming technology,

extending the phosphoric acid and oil reaction time and adding specific additives, our equipment

can remove phospholipids in oil to the maximum.

2.The new carclazyte automatic quantitative system can produce more reliable oil of good quality, with

less investment for the full vacuum closed refining technology.

3.We can design the optimum refining scheme according to different oils and different requirements

for products.

groundnut oil refinery machine energy cosumption:

Shandong LD Grain&Oil Machine Co.,Ltd has applied the automatic control system with advancedness, security, reliability into the pretreatment, extraction, refining and fractionation in large oil plants. For its application in automatic control system, it can control the production in the entire workshop and monitor the operational status of each device by controlling the computer terminals in the room. One person only can operate the entire workshop, with efficient production management. It has reduced the production cost greatly and improved the management efficiency.

1. The Shandong Qi’e grain and oil machinery company’s experts guide installation and have good technology.

We make the cooperation with Qi’e group many times. Their experts guide installation on-site and after-sales team provides 24 hours of technical services.

I think they have done a well in this respect. Among the large number of grease equipment manufacturers, they are very good in China. Hope we can continue to cooperate in the future.

2. Shandong Qi’e grain and oil machinery company’s equipment have good quality, and shipped on time.

We make the cooperation with Qi’e group for long time. Because they are manufacturer, their equipment have good quality assurance and reasonable price. They shipped on time after we finish contract.

If you are interested in our products, please kindly send me your inquiry details in the Below , Click "Send" Now!

Shandong Leader Machinery Co.,Ltd. is one of the leading Manufacturers and Suppliers of Hot sale groundnut oil refining products made in China.Shandong Leader Machinery Co.,Ltd. manufacture Hot sale groundnut oil refining products made in China making machine using cutting-edge technology, Shandong Leader Machinery Co.,Ltd. have many kinds of Seed Hydraulic Press Machine for you reference,such as Hot sale groundnut oil refining products made in China ,Shandong Leader Machinery Co.,Ltd. can meet your different requirement in Seed Hydraulic Press Machine.Welcome to contact Shandong Leader Machinery Co.,Ltd.,contact name:Ms.Myra for a quotation
(Tel/whatsapp:0086-18363092712, Email:[email protected],Skype:leaderfoodmachine2).Welcome to send us your enquiry about capacity for Hot sale groundnut oil refining products made in China, inform us raw material you want to use for Hot sale groundnut oil refining products made in China,and specific requirements for Hot sale groundnut oil refining products made in China.Shandong Leader Machinery Co.,Ltd. will provide you best solution for your project about Seed Hydraulic Press Machine.