Description of Edible Oil Filling Line:
1.bottom price canton fair LD brand cottonseed oil manufacturers adopt volumetric piston pump, pneumatic control SS check valve to fill various kinds on liquid from light to medium heavy.
2. Pneumatic control piston pump,easy adjust filling volume.
3. Top liquid hopper applicalion,with auto level sensor to control stuff supply and stop.
4. Auto shut on/off filling nozzle,prevent drop shile filling.
5. bottom price canton fair LD brand cottonseed oil manufacturers is convenient to take out component parts to clean and sterilize,adjust to fit to other bottle size with no change parts.
Shandong Leader Machinery Co.,Ltd. Services:
1. Pre-check and accept products ahead of delivery.
2.Reporting on machine situation from time to time.
3. Train the first-line operators.
4. Drawing workshop layout.
After-sale service of Shandong Leader Machinery Co.,Ltd.:
1.Examine the equipment.
2. Assist clients to prepare for the first construction schedule.
3. Provide perfect service.
4. Provide considerable services to minimize client’s worries.
5. Take initiative to eliminate the troubles rapidly.
6. Install and debug the equipment.
Shandong LD Grain and Oil Machinery Co.,Ltd.
The picture for cottonseed oil manufacturers  
|
| The brief introduction for cottonseed oil manufacturers |
* Extraction process
The pre-pressed cake or flake, firstly enter into the sealed scraper blade to avoid
the solvent gas escaping because of the section without screw blade in the sealed auger.
Cotton seeds enter into the box-chained loop type extractor counter-currenting with
the solvent, the grease is extracted.
Miscella condnesity increase from 2% to more than 25%.
Miscella discharged from extractor and into miscella filter, then the leached meal
in the miscella tank enter into evaporation system through the first evaporation
feed pump and finally drop-in DTDC out from wet meal drag conveyor.
*Evaporation process
Using the secondary steam desolventized from DTC desolventizer and produced by
steam-jet pump to heat and evaporate micella in the first long-tube evaporator.
Export temperature reaches to 58-62°c and condensity reaches to more than 65%.
Then, micella enters into the second long-tube evaporator in which the temperature
is heated to 105-110°c by indirect steam and the condensity reaches to more than 95%.
Then miscella enters into stripper in which residual solvent in oil will be removed,
the export temperature reaches to about 105°c and the general volatile of the
extracted crude oil is less than 0.30%.
*Desolventizing process
Wet meals discharged from the bottom of extractor enter the top of DTDC and
land on the predesolventizing trayers where thery are heated by the indirect steam,
thus, some solvent in meal is evaporated and meal temperature is risen.
Predesolventized meals land on predesolventizing trayers where they use the second
steam in desolventizing trayers to predesolventize solvent from meal, then meals enter
desolventizing layers in which direct steam is injected.
Direct steam is sprayed into the meals through the bottom holes, and distill the
solvent from meal by using steam in order to remove all solvent.
Desolventized meals land on the following drying and cooling layer to dry and cool meals,
cooled meals land on meal scraper blade from automatic material controlling gate on the
bottom of cooling layer, and then they are entered into meal storehouse.
*Condensation recovery process
Extractor is equipped with a separate condenser, first and second evaporation share
one condenser. Low and high temperature of solvent gas both from first and second
evaporation enter into the condenser after its neutralization, which greatly reduces
the load of condenser and improves the efficiency of condensing.
Stripping and analyzing share one condenser, the non-condensable gases from extractor
and other condensers enter into the vent gas recovery system through the final condenser.
In the recycling system, the cold paraffin will absorb the solvent gas and the final
nonsolvent gas will be discharged through fire resistance valve.
Paraffin absorbed the solvent gas can be also called rich oil, after heating by oil-oil heat
exchanger and steam, the rich oil will enter into desorber for desorption,
and into condenser after changing solvent into gas,
the final cooled paraffin can be recycled.
| Technical Parameters for cottonseed oil manufacturers |
| Steam consumption | 200kg/ton oil |
| Electric consumption | 28kwh/ton oil |
| Water(soften water) | 150kg/ton oil |
| Phosphoric acid | 2~3 kg/ ton oil |
| Alkali | acid valuex 1-3kg/ ton oil |
| Circulating water cooling water yield | 150m3/h |
| Bleaching earth consumption | 3-5kg/ ton oil |
| Waste bleaching earth oil content | ≤25~35% |
| Refining losses |
acid valuex 1.2 (chemical refining) acid valuex 0.6 (physics refining ) |
| Bleaching losses | the quantity of bleaching earth x 0.25% |
| Deodorization loss consumption | ≤0.5% |
| Refining rate | 1-refining consumption |
| Advantages for cottonseed oil manufacturers |
* Absorbing the world's leading core extraction technology, design and develop
a process which is efficient, economical and reliable. Adopting box-chained loop
type extractor can effectively achieve low residual oil, low solvent consumption
and low failure rate of equipment.
* Full automatic computer control system is adopted in extracting process,
adjust automatically and operate stably.
* Negative pressure technology is adopted in condensate system.
* Stainless steel heat exchange tubes and multistage baffling make the condenser
have a high heat transfer effciency, also the water consumption is low.
| Certificate |
If you are in the market for cottonseed oil manufacturers,
please contact with Joanna ^ 6^
Mobile: 0086 13526828605 ( welcome to add my whatsapp and viber )
Shandong Leader Machinery Co.,Ltd. is one of the leading Manufacturers and Suppliers of bottom price canton fair LD brand cottonseed oil manufacturers.Shandong Leader Machinery Co.,Ltd. manufacture bottom price canton fair LD brand cottonseed oil manufacturers making machine using cutting-edge technology, Shandong Leader Machinery Co.,Ltd. have many kinds of Edible Oil Filling Line for you reference,such as bottom price canton fair LD brand cottonseed oil manufacturers ,Shandong Leader Machinery Co.,Ltd. can meet your different requirement in Edible Oil Filling Line.Welcome to contact Shandong Leader Machinery Co.,Ltd.,contact name:Ms.Myra for a quotation
(Tel/whatsapp:0086-18363092712, Email:[email protected],Skype:leaderfoodmachine2).Welcome to send us your enquiry about capacity for bottom price canton fair LD brand cottonseed oil manufacturers, inform us raw material you want to use for bottom price canton fair LD brand cottonseed oil manufacturers,and specific requirements for bottom price canton fair LD brand cottonseed oil manufacturers.Shandong Leader Machinery Co.,Ltd. will provide you best solution for your project about Edible Oil Filling Line.