Professional refinery equipment for cooking oil,Cooking oil refining equipment,Cooking oil refining project machine

The purpose of Main Processes of Manufacturing Rice Bran Oil preparation is to extract a portion of oil by mechanical pressing while providing pressing cakes for extraction plant. Professional refinery equipment for cooking oil,Cooking oil refining equipment,Cooking oil refining project machine is a succession of several of the following processes: Bran Cleaning & Weighing, Cracking, Softening, Puffing,Flaking, Pressing, Oil Residue Extraction,Filling and Packing.The purpose of Main Processes of Manufacturing Rice Bran Oil flaking is to turn the softened rice bran into thin flakes (from 0.3 to 0.35mm) for the subsequent oil extraction through mechanical pressing. In addition, flakes thickness can be adjusted through roll pressure adjustment device. Horizontal drum softener is designed to adjust temperature and moisture of Rice Bran previous to flaking, Professional refinery equipment for cooking oil,Cooking oil refining equipment,Cooking oil refining project machine improving oil yield greatly.

Professional refinery equipment for cooking oil,Cooking oil refining equipment,Cooking oil refining project machine

1. Refining Process about Professional refinery equipment for cooking oil,Cooking oil refining equipment,Cooking oil refining project machine

2. Main refining process introduction about Professional refinery equipment for cooking oil,Cooking oil refining equipment,Cooking oil refining project machine

(1).P-acid degumming operation:

Drawing the filtered or settled crude oil into the neutral pot, control oil te-

mperature 40 ° C, liquid level cover the neutral pot volume about 80 %.Add

into the neutral pot P-acid with 85% concentration, 0.1-0.2% oil weight.Start

up neutral pot, make main shalf stirring at 60-70 r/min, finish de-gumming

in 30 min.

(2).Alkali de-acid operation:

After finish de-gumming process, at once add into lye carrying alkali refini-ng de-acid, lye concentration 16 ° Be super alkali is 0.1-0.3% oil weight, after finish adding, continuous stirring 30min, when soap particles accumulated

condensing, should reduce stirring speed, 30r/min avoid emulsion. After adding alkali, gradually rising temp to the

end temp 65 ° C, see to that the rising temp speed should control at 1 degree per minute, not too fast. Shut off neutral pot drive part, the oil settled in the pot 6-8 hours, make oil separate from soap.

(3).Water rinse operation:

Adjust the neutral pot oil temp to about 85 ° C, add into hot water whose te-mp higher oil temp 10-15° C, the water use

amount each time is 10-15% oil weight.

Start neutral pot drive part, make the main shalf stirring washing at 30r/min, make the oil and water fully contact, stirring

time 5-10 min.If oil/soap separate not ideal, the oil contains relative high left soap, the fir-st time washing,

better to use thin salt water evenly spray into oil.

(4).De-coloring:

After dehydrate, inhale 3-5% oil weight active clay into the de-color pot to carry absorb de-coloring.

Decolor pot main axis stirring speed 60r/min, time 20 min, vacuum degree 750mmHg, is the whole absorb de-color craft process requirement.

Shut off vacuum valve, open vacuum break valve, stirring non-stop, reduce the oil temp down to 70 ° C, the de-color finished.

Continuous stirring, open oil outlet valve, press the de-color oil into the press filter,filter away waste clay,

the last use air compressor blow clean and dry

(5).De-odor operation:

Open the vacuum valve, make the pot inside vacuum degree gradually reach above 750mmHg.Inhale the de-color oil after

filter into the de-odor pot, see to that oil amount should cover the pot volume 60% Control oil temp at 240 ° C - 260 ° C

use the direct steam under 0.1 -0.3Mpa to distillate 3-4 hours.Shut off steam, shut off heat source, when the oil

temp cooling to below 80 ° C, shut off vacuum, release de-odor oil , the de-odor process has finished.

3. Characteristics about Professional refinery equipment for cooking oil,Cooking oil refining equipment,Cooking oil refining project machine

This units belongs to intermittent refining oil equipment, has all functions of large, small scale intermittent refining

equipment, and better than them. This equipment can produce high-cooking oil or salad oil. This units complete set

combined, self-prepare heat source, gas source, elect-rics control. Light weight, save electricity , convenient use,

this machine do not need special basis, either indoor or outdoor is OK, just need to make up power source, water,

prepare coal, alkali, Pacid, active clay, edible salt and other consume materials.

4. Units devices about Professional refinery equipment for cooking oil,Cooking oil refining equipment,Cooking oil refining project machine

(1). Refining pot: used to P-acid de-gumming, alkali refining de-acid and water rinsing.

(2).De-color pot: used to remove off pigments, bleaching oils and grease de-hydrate.

(3).De-odor pot: used to remove off oils odor, foreign smells (stainless made)

Heat-transfer oil stove: supply each device production needing heat energy, temperature reach above 280 ° C.

(4).Steam generator: produce the needing steam for de-odoring and distillation.

(5).Vacuum pump: supply needing vacuum for dehydrate, de-color, de-odor. Vacuum degree can reach above 755mmHg.

(6).Press filter: filter clay, filter out clear oil.

(7).Air compressor: blow dry bleached clay, blow empty the leftover oil in the press filter.

5. Technical parameters about Professional refinery equipment for cooking oil,Cooking oil refining equipment,Cooking oil refining project machine

6. Certificate

7. Our customer

8. My contact details

Main Processes of Manufacturing Rice Bran Oil Rice Bran is a kind of high oil-containing oilseed. Generally Professional refinery equipment for cooking oil,Cooking oil refining equipment,Cooking oil refining project machine is necessary to extract a portion of oil by mechanical pressing previous to subsequent process. Expeller with auxiliary cooker ensures material reach proper temperature and moisture. Shandong Leader Machinery Co.,ltd. Pressing cakes containing residual oil from 14% to 18% is then treated by solvent extraction while crude oil is to be filtered. Due to high content of residue in crude oil, Main Processes of Manufacturing Rice Bran Oil is necessary to separate oil residue by oil drag conveyor firstly, Shandong Leader Machinery Co.,ltd. crude oil then enters to settling tank for further separation. Collected residue is returned to pressing section while crude oil from settling tank is pumped to Professional refinery equipment for cooking oil,Cooking oil refining equipment,Cooking oil refining project machine frame filter or leaf filter for further removing impurities.Professional refinery equipment for cooking oil,Cooking oil refining equipment,Cooking oil refining project machine is designed to cool down pre-pressing cakes with high efficiency, then cakes is conveyed to extraction plant.

If you have any demand about microwave drying equipment and edible oil refining equipment, pls feel free contact us any time.
Email:[email protected]
Whatsapp:+86 13064099546
Skype:leaderfoodmachine21
Contact:Mandy

NOTE:We can specially design the machine according to your production's features.