oilve oil refining equipment,Professinal engineer could be availble to service overseas,

The purpose of Main Processes of Manufacturing Rice Bran Oil preparation is to extract a portion of oil by mechanical pressing while providing pressing cakes for extraction plant. oilve oil refining equipment,Professinal engineer could be availble to service overseas, is a succession of several of the following processes: Bran Cleaning & Weighing, Cracking, Softening, Puffing,Flaking, Pressing, Oil Residue Extraction,Filling and Packing.The purpose of Main Processes of Manufacturing Rice Bran Oil flaking is to turn the softened rice bran into thin flakes (from 0.3 to 0.35mm) for the subsequent oil extraction through mechanical pressing. In addition, flakes thickness can be adjusted through roll pressure adjustment device. Horizontal drum softener is designed to adjust temperature and moisture of Rice Bran previous to flaking, oilve oil refining equipment,Professinal engineer could be availble to service overseas, improving oil yield greatly.

oilve oil refining equipment

Automatic Control System of oilve oil refining equipment

Our company has applied the automatic control system with advancedness, security, reliability into the pretreatment, extraction, refining and fractionation in large oil plants. For its application in automatic control system, it can control the production in the entire workshop and monitor the operational status of each device by controlling the computer terminals in the room. One person only can operate the entire workshop, with efficient production management. It has reduced the production cost greatly and improved the management efficiency.

oilve oil refining equipment Introduction:

Alkali hot water

Crude oil→filter→mix→reactor→mix→reactor→centrifugal separation→oil residue

↑ ↓

Phosphoric acid hot water→mix ↓

↓

degumming oil←cooler←dry←centrifuge separation←mix←alkali liquor

↓ ↓

↓ vacuum steam jet pump←steam citric acid

↓ ↓

bleaching earth→mix→decoloring→filter→decoloring oil→mix→heat

↓

refined oil←filter←cool←deodorizing←vacuum

oilve oil refining equipment-Main Processes Introduction

oilve oil refining equipment

Neutralization: the crude oil is output by the oil feed pump from the oil tank, and next enters the crude oil heat exchanger to recover part of heat after metering and then is heated to the required temperature by the heater. After that, the oil is mixed with the metered phosphoric acid or citric acid from phosphate tank in the gas mixture (M401), and then enters the conditioning tank (R401) to make the non-hydratable phospholipids in oil change into the hydratable phospholipids. Add the alkali for neutralization, and the alkali quantity and alkali solution concentration depend on the quality of the crude oil. Through the heater, the neutralized oil is heated to the temperature (90°C) suitable for centrifugal separation to remove the phospholipids, FFA and other impurities in the crude oil. Then the oil goes to the washing process.

Washing: there is still about 500ppm soap in the neutralized oil from the separator. To remove the remaining soap, add into the oil about 5~8% hot water, with water temperature 3~5 °C higher than the oil generally. To achieve more stable washing effect, add phosphoric acid or citric acid when washing. The re-mixed oil and water in the mixer is heated to 90-95°C by the heater, and then enters the wash separator to separate the remaining soap and most water. The water with soap and oil enters into oil separator to separate out oil in the water. Further catch the oil outside, and the waste water is discharged to the sewage treatment station.

Vacuum drying stage: there is still moisture in the oil from the wash separator, and the moisture will affect the stability of the oil. So the oil at 90°C should be sent to vacuum drier to remove the moisture, and then the dehydrated oil goes to the decoloring process. Finally, pump out the dry oil by canned pump.

Decoloring Process:

The main function of decoloring process is to remove oil pigment, residual soap grain and metal ions. Under negative pressure, the mechanical mixing method combined with steam mixing will improve the decoloring effect.

Picture of oilve oil refining equipment

If you have interest in our oilve oil refining equipment,just free to contact us.

Main Processes of Manufacturing Rice Bran Oil Rice Bran is a kind of high oil-containing oilseed. Generally oilve oil refining equipment,Professinal engineer could be availble to service overseas, is necessary to extract a portion of oil by mechanical pressing previous to subsequent process. Expeller with auxiliary cooker ensures material reach proper temperature and moisture. Shandong Leader Machinery Co.,ltd. Pressing cakes containing residual oil from 14% to 18% is then treated by solvent extraction while crude oil is to be filtered. Due to high content of residue in crude oil, Main Processes of Manufacturing Rice Bran Oil is necessary to separate oil residue by oil drag conveyor firstly, Shandong Leader Machinery Co.,ltd. crude oil then enters to settling tank for further separation. Collected residue is returned to pressing section while crude oil from settling tank is pumped to oilve oil refining equipment,Professinal engineer could be availble to service overseas, frame filter or leaf filter for further removing impurities.oilve oil refining equipment,Professinal engineer could be availble to service overseas, is designed to cool down pre-pressing cakes with high efficiency, then cakes is conveyed to extraction plant.

If you have any demand about microwave drying equipment and edible oil refining equipment, pls feel free contact us any time.
Email:[email protected]
Whatsapp:+86 13064099546
Skype:leaderfoodmachine21
Contact:Mandy

NOTE:We can specially design the machine according to your production's features.