The purpose of Main Processes of Manufacturing Rice Bran Oil preparation is to extract a portion of oil by mechanical pressing while providing pressing cakes for extraction plant. automatic palm fruit oil refinery mchine, oil plant equipment for sale is a succession of several of the following processes: Bran Cleaning & Weighing, Cracking, Softening, Puffing,Flaking, Pressing, Oil Residue Extraction,Filling and Packing.The purpose of Main Processes of Manufacturing Rice Bran Oil flaking is to turn the softened rice bran into thin flakes (from 0.3 to 0.35mm) for the subsequent oil extraction through mechanical pressing. In addition, flakes thickness can be adjusted through roll pressure adjustment device. Horizontal drum softener is designed to adjust temperature and moisture of Rice Bran previous to flaking, automatic palm fruit oil refinery mchine, oil plant equipment for sale improving oil yield greatly.
palm fruit oil refinery mchine
Basing on the traditional oil refining technology, Shandong Leader Machinery Co,.Ltd. has developed the latest combined packing layer plate deodorization soft tower and the physical and chemical mixed refining technology for crude oil of any quality. Moreover, a series of advanced technology and equipment are used, such as super wet deguming, bleaching earth automatic metering, negative pressure decoloring, high vacuum steam jet deodorization, deacidification, winterization dewaxing etc..
Refined plam oil
Main Processes Introduction of automatic caster oil refinery plant equipment
Hydration Deguming & Alkali Refining Deacidification Process of automatic caster oil refinery plant equipment
Neutralization: the crude oil is output by the oil feed pump from the oil tank, and next enters the crude oil heat exchanger to recover part of heat after metering and then is heated to the required temperature by the heater. After that, the oil is mixed with the metered phosphoric acid or citric acid from phosphate tank in the gas mixture (M401), and then enters the conditioning tank (R401) to make the non-hydratable phospholipids in oil change into the hydratable phospholipids.
Washing: there is still about 500ppm soap in the neutralized oil from the separator. To remove the remaining soap, add into the oil about 5~8% hot water, with water temperature 3~5 ðC higher than the oil generally. To achieve more stable washing effect, add phosphoric acid or citric acid when washing. The re-mixed oil and water in the mixer is heated to 90-95ðC by the heater, and then enters the wash separator to separate the remaining soap and most water. Vacuum drying stage: there is still moisture in the oil from the wash separator, and the moisture will affect the stability of the oil. So the oil at 90ðC should be sent to vacuum drier to remove the moisture, and then the dehydrated oil goes to the decoloring process. Finally, pump out the dry oil by canned pump.
Continuous Refining Decoloring Process of automatic caster oil refinery plant equipment
Continuous Decoloring Process Features:
1. The oil fully contacting with the decolorant can improve the decolorization efficiency and reduce the usage of decolorant;
2. The continuous and uniform material flows will balance the decoloring time and avoid the recovery of grease oxidation and acid value.
3. The special mixing structure of decoloring tower won't cause the material dead area, which can avoid the adsorbent sedimentation and pipe blockage.
4. The continuous airtight efficient filtration equipment has realized the automation of cake discharge and reduced the labor intensity.
5. The advanced drying technology can reduce the oil content in filter cake.
Continuous Refining Deodorizing Process of automatic caster oil refinery plant equipment
The qualified decolored oil enters into the spiral plate heat exchanger to recover most of the heat, and next goes to high pressure steam heat exchanger to be heated to the process temperature (240-260ðC) and then enters the deodorization tower. The upper layer of combined deodorization tower is the packing structure which is mainly used to remove the odor producing components such as free fatty acid (FFA); the bottom layer is the plate tower which is mainly for achieving the hot decoloring effect and reducing the peroxide value of the oil to zero. Oil from the deodorization tower enters into the heat exchanger to recover most of the heat and makes further heat exchange with crude oil, and then is cooled to 80-85ðC through the cooler.
Picture of automatic caster oil refinery plant equipment
Main Processes of Manufacturing Rice Bran Oil Rice Bran is a kind of high oil-containing oilseed. Generally automatic palm fruit oil refinery mchine, oil plant equipment for sale is necessary to extract a portion of oil by mechanical pressing previous to subsequent process. Expeller with auxiliary cooker ensures material reach proper temperature and moisture. Shandong Leader Machinery Co.,ltd. Pressing cakes containing residual oil from 14% to 18% is then treated by solvent extraction while crude oil is to be filtered. Due to high content of residue in crude oil, Main Processes of Manufacturing Rice Bran Oil is necessary to separate oil residue by oil drag conveyor firstly, Shandong Leader Machinery Co.,ltd. crude oil then enters to settling tank for further separation. Collected residue is returned to pressing section while crude oil from settling tank is pumped to automatic palm fruit oil refinery mchine, oil plant equipment for sale frame filter or leaf filter for further removing impurities.automatic palm fruit oil refinery mchine, oil plant equipment for sale is designed to cool down pre-pressing cakes with high efficiency, then cakes is conveyed to extraction plant.
If you have any demand about microwave drying equipment and edible oil refining equipment, pls feel free contact us any time.
Email:[email protected]
Whatsapp:+86 13064099546
Skype:leaderfoodmachine21
Contact:Mandy
NOTE:We can specially design the machine according to your production's features.