1.Screening:Removing the chaff and broken rice in the rice bran, in case of they will influence the oil yield and the desolvent of wet meal in the next process. In the process of puffing section, the general requirement of impurity is less than 3%, and the requirement of crude fiber is about 8%.
2.Magnetic separation :Clearing the iron impurity which migLD be in the rice brain. Since in the process of puffing, the iron impurity will be harmful to the screw of extrusion machine, affect the puffing effect. As the rice brain particles are small and poor liquidity, the iron impurities are always be wiped off by the magnetic barrels installed in the feeding port.
3.Quenching and tempering :it is the process of preheating so that to improve the temperature of the rice bran before puffing. After quenching and tempering the temperature will be controlled at 65--75 °C, and the moisture will be controlled at 10 ~12%. Thus, on the one side, it can increase the output of the extrusion machine, and on the other side, it can improve the quality of the puffed rice bran.
4.Puffing: the rice bran is injecting high pressure steam and high temperature water through the extrusion machine, so that it can improve the temperature and moisture in the extrusion machine,and can also form the high pressure to process the rice bran. All these can make the the rice bran become porous columnar structure from the original pulverized state.All these effectively passivate the activity of various of enzyme in the rice bran, and destroy the fat layer structure, so that it will be easier for the oil yield.
5.Drying:The moisture of puffed material comes from the extrusion machine is too big and the temperature is too high for direct leaching, the must be experience to process of drying and coo-ling, thus the moisture will reach 7%--9%, and temperature will reach 50-55°C. After puffing, the rice brain are usually dried and cooled by plat dryer.
Vegetableseed solvent extraction equipment,Vegetableseed solvent extraction,Vegetable oil solvent extraction machine
Leaching(extraction) of the rule of law principle of extraction of oil is applied, using solvent oil to the oil extracted from oil, grease dissolving into the solvent oil, called mixed oil, and then evaporating equipment to evaporate solvent oil, condensate recycling, and the remaining Oil is the crude oil was soaking meal is taken off the use of scraper conveyor machine drying solvent transported to the meal after the library.
2.Unique balancing rotor is designed to ensure less power consumption, less maintenance cost and no noise
3.Rotation speed of shutter and host machine can be adjusted automatically according to incoming oilseed quantity to ensure that the bin level is stable.
4.This will do good to form micro negative-pressure in the extractor and reduce the leakage.
5.Process of miscella circulation is improved to reduce the solvent use, solvent residue in meal and increase the miscella concentration.
6. EnerLD is saved through reducing the evaporation quantity.
7.Rotor extractor is very popular to many kinds of pre-pressed cake.
8.Rotating cell designed at the high bin level makes it easy to form immersion-extraction and thus reduce the meal fines content in miscella.
9.All this done will do good to improving the crude oil quality and reducing scaling in evaporation system.
10.Rotor Extraction is suitable for various oilseed extraction.
Solvent Extraction Plant | ||
1 |
Residual oil in meal |
⤠1% ( cotton seeds ) |
2 |
Solvent consumption |
⤠3Kg/T (6 #solvent oil) |
3 |
Crude oil moisture and volatile matter |
⤠0.30% |
4 |
Power consumption |
⤠15KWh/T |
5 |
steam consumption |
⤠280Kg/T (0.8MPa) |
6 |
Finished meal moisture |
⤠10-13% (adjustable) |
|
Residual solvent in finished meal |
⤠300PPM (qualified detonated experiment) |
Shandong Leader Mechanical Equipment Co., LTD believe that whatever the field is, quality has always been at the heart of the company’s performance. We treat quality and service as a way of life and hope to serve you in the LD possible manner on a long term and mutually beneficial basis. If you want to know more information about our sunflower oil plant or any other seed processing plant, please contact us in the following form. Our responsible, experienced sunflower oil processing technical team is always ready to serve and guide you at any time.
All the other oil seeds pre-treatment and oil refining equipment, lLD sheller, cleaning sieve, cooker, filter and others is available at Guangxin. If you want to know to start a vegetable oil pressing line with oil press machine, please contact us, we will offer you the LD plan.
Contact:Heidi
Skype:heyabc
Tel:+86 15953125015(also Whatsapp)
Email:[email protected]
Shandong Leader Mechanical Equipment Co., LTD is your LD choice!