Edible oil refining 10-100TPD New technolgy rice bran oil extraction machine with rice bran oil refining process includes a series processing procedures as degumming, neutralization, bleaching, deodorization and winterisation. In general there are two methods of vegetable/edible oil processing, one is physical refining and the other is chemical refining. However, no matter what kinds of reining methods Small Coconut Oil Mill Machinery, Shandong Leader Machinery Co.,ltd. are all done with the help of various oil processing equipment and machinery, and are used to refine almost all kinds of oil extracted from oil seeds like sunflower seeds, peanuts , sesame seeds, and soya bean seeds etc.
Main Steps of Edible Oil Refining: Small Coconut Oil Mill Machinery Crude Oil Degumming: In this step gums in crude oil are removed by hydration with the help of phosphoric acid.Neutralization: In this step free fatty acids are neutralized by using sodium hydroxide and convert them into soap. Additional impurities are also removed by adsorption on soap.Bleaching: During bleaching, unwanted pigments are adsorbed physically and oil will become much clearer.Deodorization: Deodorization is used to remove unacceptable odors by steam distillation, the odoriferous compound are stripped off with the help of live injected steam into heated oil under high vacuum pressure.Dewaxing (necessary for cold areas)Some kinds of oil like sunflower, maize germ or corn oil have waxes inside, if these Shandong Leader Machinery Co.,ltd. impurities are not removed, the oil will freeze easily under low temperature, thus effecting oil quality and appearance. so this process is necessary in extremely cold areas.
New technolgy sesame oil extraction machine with save energy
1. Sesame oil extraction machine introduction:
(1) Function: Extraction system is an oil extraction through soaking or spraying pre-pressed cake by a certain organic solvent. The principle of this part is the different solubility of solvent.
(2) Use range: Solvent extraction fits for pre-press extraction of high-oil-content materials and direct once time extraction of low-oil-content materials.
(3) Main parts: The extraction machine series includes rotary extractor, toaster, 1st evaporator, 2nd evaporator, stripping tower, condenser, etc.
2. Sesame oil extraction machine main parts:
(1) Solvent pumps: continuously spray solvent to the rotary-type extractor
(2).Rotary extractor: Spray and soak the pre-pressed cake with solvent so that oil fats can be dissolved in solvent(form miscella). After processing, you can get wet meal and miscella (mied oil).
(3). DTDC: usd to separate the solvent from the wet meal.
(4). Miscella tank 1st: pump the miscella (oil with solvent) in to the miscella 1st , and then add 10% saline water to it. The phospholipid and impurities in the miscella will react with the saline water, at last the reactant precipitate, reaching the goal of purifying.
(5). Miscella tank 2nd: the purified miscella will be pumped into it.
(6). Miscella stripping: it will remove the remaining solvent in miscella. And the solvent will be discharged to condenser for recycling.
(7). condensers: used to cooling the solvent gas separated from the wet meal and miscella for recycling.
3. Sesame oil extraction machine main Process:
(1) The material (for pretreatment) is sent to rotary extraction by the scraper conveyor. The material will extracted by the solvent or mi oil. After this step, we will get meal and mi oil.
(2) Meal is sent to toaster. Through the toaster, the solvent in the meal will separate from the meal. The solvent goes to condenser and is recycled to rotary extraction.
(3) After the mi oil from the rotary extraction enters into 1st evaporator and 2nd evaporator, most of the solvent in the mi oil is separated.
(4) The mi oil from 2nd evaporator goes to stripping tower and almost all the solvent is separated. From the stripping tower, we can get crude oil and solvent. The solvent is sent to condenser and is recycled to rotary extraction.
4. Sesame oil extraction machine advantages:
(1) Adopt stainless steel filed grid plate and increase the horizontal grid plates, which can prevent the strong miscella from flowing back to the blanking case, so as to ensure good extraction effect;
(2) The rotocel extractor is driven by rack, with unique rotor of balanced design, low rotating speed, low power, smooth operation, no noise and quite low maintenance cost;
(3) The feeding system can adjust the rotating speed of airlock and main engine according to the feeding quantity and maintain a certain material level, which is beneficial to the micro negative pressure inside the extractor and reduce the solvent leakage.
(4) The advanced miscella circulation process is designed to reduce the fresh solvent inputs, reduce the residual oil in meal, improve the miscella concentration and save energy by reducing the evaporation capacity.
(5) The high material layer of the extractor helps to form immersion extraction, reduce the meal quality in miscella, improve the quality of crude oil and reduce the evaporation system scaling.
(6) Specially suitable for the extraction of various pre-pressed meals.
5. Professional advice for sesame oil extraction machine
Please kindly inform us your required daily capacity, treated quantity, raw material, covering space and related data,so that we can make flow chart production line for you as your requirement. we will stand at your point to suggest low cost and suitable production line for you. Sincerely want to cooperate with you.
Company Information
ShandongQi'E&Oil Machine Co.,Ltd is a large-sized joint-equity enterprise which specialize in producting edibl oil mechanical equipment andit is aslo a group enterprise integrating scientific research, manufacturing,sales as one.
Our products are exported to more than 30 countries,and regions such as Russia,India,South Afica, Ukraine, Nepal,
Indonesia and so on.
Our customer
Contact us
The purpose of Neutralizing Vegetable Oils Small Coconut Oil Mill Machinery is to remove Free-Fatty Acids (FFAs). Traditionally, FFAs are treated with caustic soda (NaOH). The reaction produces Soaps which are separated from the oil. Because 10-100TPD New technolgy rice bran oil extraction machine with rice bran oil refining process trace amounts of soaps remain in the oil, the oil is either washed with water or treated with Silica.Shandong Leader Machinery Co.,ltd. Some processors prefer not to perform caustic neutralizing. Instead, they prefer Physical Refining in which the FFAs are evaporated from the oil under high temperature and vacuum. This 10-100TPD New technolgy rice bran oil extraction machine with rice bran oil refining process process can be combined with deodorization step described under FFA stripping.Physical Refining process 10-100TPD New technolgy rice bran oil extraction machine with rice bran oil refining process is preferred because (a) it does not produce soaps; (b) it recovers fatty acids that provide better cost recovery; (c) there is smaller yield loss compared to caustic refining—especially for oils with higher FFAs; and (d) it is a chemical-free process.
If you have any demand about microwave drying equipment and edible oil refining equipment, pls feel free contact us any time.
Email:[email protected]
Whatsapp:+86 13064099546
Skype:leaderfoodmachine21
Contact:Mandy
NOTE:We can specially design the machine according to your production's features.