100Ton palm cooking oil equipment

100Ton palm cooking oil equipment from Shandong Microwave Machinery Co.,Ltd.

Carrie-Sales manager

Shandong Microwave Machinery Co.,Ltd.

Web: www.epier.com

Email: [email protected]

Skype:leaderfoodmachine10

Moblie:0086-15020017267(also WhatsApp)

100Ton palm cooking oil equipment for oil plant
Process Description of Rice bran oil machinery:
The purpose of preparation is to extract a portion of oil by mechanical pressing while Rice bran oil machinery providing pressing cakes for extraction plant. 100Ton palm cooking oil equipment is a succession of several of the following processes: Bran Cleaning & Weighing, Cracking, Softening, Puffing,Flaking, Pressing, Oil Residue Extraction,Filling and Packing.

Description of Process of 100Ton palm cooking oil equipment:

1. Cleaning & Weighing Section of 100Ton palm cooking oil equipment
100Ton palm cooking oil equipment from daily bin is treated by magnetic separator, weighing scale and screener with dedusting aspiration network to remove impurities.
2. Cracking Section of Rice bran oil machinery
The purpose of cracking is to crack Rice Bran into small particles previous to softening and flaking, in order to improve the quality and capacity of the flaker.
3. Softening and Puffing Section of 100Ton palm cooking oil equipment
Horizontal drum softener is designed to adjust temperature and moisture of Rice Bran previous to flaking, improving oil yield greatly.

100Ton palm cooking oil equipment

Oil equipment introduction :

Oil equipment including the extraction of pre-pressed cake, miscella evaporation at negative pressure, stripping, wet meal desolventizing, solvent vapor condensation,

vent gas recovery and so on.

1.Extracting of Oil equipment

The pre-pressed cake, firstly enter into the sealed scraper blade to avoid the solvent gas escaping. Sunflower seeds enter into the extractor counter-currenting with the solvent, the grease is extracted. Miscella condensity increase from 2% to more than 25%. Miscella discharged from extractor,

then into miscella filter, and the leached meal finally drop-in DTDC out from wet meal drag conveyor.

2.Evaporation of Oil equipment

Using the secondary steam desolventized from DTC desolventizer and produced by steam-jet pump to heat and evaporate micella in the first long-tube evaporator. Export temperature reaches to 58-62℃ and condensity reaches to more than 65%. Then, micella enters into the second long-tube evaporator in which the temperature is heated to 90-95℃ by indirect steam and the condensity reaches to more than 95%. Then miscella enters into stripper in which residual solvent in oil will be removed,

the export temperature reaches to about 105℃ and the general volatile of the extracted crude oil is less than 0.30%.

3.Desolventizing of Oil equipment

Wet meal in seal scraper blade drop-in DTDC evapo-separated machine through material seal screw for desolventizing, drying and cooling. The machine has eight layers and its flow controlling gate is flexible

and reliable.Desolventizing baiting layer uses seal screw.

4.Condensation recovery of Oil equipment

Extractor is equiped with a seperate condenser, 1st and 2nd evaporation share one condenser. Low and high temperature of solvent gas both from 1st

and 2nd evaporation enter into the condenser after its neutralization, which greatly reduces the load of condenser and improves the efficiency of condensing.

Stripping and analyzing share one condenser, the non-condensable gases enter into the vent gas recovery system through the final condenser.

In the recycling system, the cold paraffin will absorb the solvent gas and the final nonsolvent gas will be discharged through fire resistance valve.

Paraffin absorbed the solvent gas can be also called rich oil, after heating by oil-oil heat exchanger and steam, the rich oil will enter into desorber for desorption, and into condenser after changing solvent into gas,

the final cooled paraffin can be recycled.

Packing : Packed by the protect film inner, water-repellent plastic outside. The wood packing is necessary if send by less than a container. it will fixed by steel rope in the container.

Make sure it is in good condition when arrived destination.

Shipping : 30 days after receiving your L/C or deposit

Dear Sir, when you need edible oil machine, cooking oil making machine,

Vegetable oil processing machine, please send me email about your requirement.

Thank you for your time!

If you need find reliable and professional Chinese supplier to provide

high quality Edible oil factory, contact us please.

Our workshops

Shandong Microwave Machinery Co.,Ltd.is a Rice bran oil machinery factory specializing in the production of 100Ton palm cooking oil equipment, scientific research,manufacturing,installation, commissioning.Shandong Microwave Machinery Co.,Ltd.can provide Rice bran oil machinerycustomers with design and services of 1-2000 tons 100Ton palm cooking oil equipment. Shandong Microwave Machinery Co.,Ltd. have finished hundreds of successful projects Rice bran oil machineryover the years: peanut oil, soybean oil, rapeseed oil, cottonseed oil, sunflower oil, sesame oil, animal oil,grape seed oil, acer truncatum oil, peony seed oil, walnut oil, hemp seed oil, pine oil, tea seed oil, papaya oil, milk thistle seed, and other special type Rice bran oil machineryoil. Shandong Microwave Machinery Co.,Ltd. have independent import and export department. Shandong Microwave Machinery Co.,Ltd. Rice bran oil machineryequipment has been successfully exported to more than ten countries: Russia, Australia, India, Afghanistan, Cameroon,and so on.