professional supplier soybean oil expeller machine produced and supplied by Shandong Microwave Machinery Co.,Ltd.
Small oil machine includes a series processing procedures as degumming, neutralization, bleaching, deodorization and winterisation. In general there are two methods of professional supplier soybean oil expeller machine, one is physical refining and the other is chemical refining by professional supplier soybean oil expeller machine. However, no matter what kinds of reining methods, professional supplier soybean oil expeller machineare all done with the help of various oil processing equipment and machinery, and Small oil machine are Small oil machine used to refine almost all kinds of oil extracted from oil seeds like sunflower seeds, peanuts , sesame seeds, and soya bean seeds etc.
Main Steps of professional supplier soybean oil expeller machine
1. Crude Oil Degumming of professional supplier soybean oil expeller machine: In this step gums in crude oil are removed by hydration with the help of phosphoric acid.
2. Neutralization of Small oil machine: In this step free fatty acids are neutralized by Small oil machine using sodium hydroxide and convert them into soap. Additional impurities are also removed by LDorption on soap.
3. Bleaching of Small oil machine: During bleaching, unwanted pigments are LDorbed physically and oil will become much clearer.
4. Deodorization of professional supplier soybean oil expeller machine: Deodorization is used to remove unacceptable odors by steam distillation, the odoriferous compound are stripped off with the help of live injected steam into heated oil under high vacuum pressure.
5. Dewaxing (necessary for cold areas) of professional supplier soybean oil expeller machine
Some kinds of oil like sunflower, maize germ or corn oil have waxes inside, if these impurities are not removed by professional supplier soybean oil expeller machine, the oil will freeze easily under low temperature, thus effecting oil quality and appearance. so professional supplier soybean oil expeller machine is necessary in extremely cold areas.
professional supplier soybean oil expeller machine
Skype: recycle000
Mob: +8618790673640
Wechat/QQ ID: 1040179689
Customer visiting
Our factory fabrication ability
Our Certificates
Process specification
1. Fruit peeling and pressing process
Reception station:
A, The FFB bunches will be transported to factory by truck, after be weighted by weighting bridge, the FFB will be
loaded down to FFB Loading Ramp.
B, The iron door of unloading ramp is controlled by hydraulic device, Get the power from Hydraulic pump station.
Starting on the hydraulic device, iron door be lifted. FFB will fall down to the Palm Fruit screw conveyor, and transported
to pre-treatment plant, to Sterilizers.
Sterilizing process:
A, By Scraper Conveyor, FFB be transported to the top of sterilizing tank. Falling into sterilizing tank from feed inlet.
B, Sterilizing tank: The inside diameter of sterilizing tank is φ2000mm, length 12500mm, welded up by Q235B
material (Chemical composition:C0.12~0.2%,Si0.12~0.3%,Mm0.3~0.7%,P
Cu
C, After FFB be transported into sterilizing tank (202), close the door of sterilizing tank, and open the vent valve behind
the tank, then saturated steam, which pressure is 3bar and temperature is about 130°
D. After all the cooling air have been discharged out,close vent valve, proceed to sterilizing section. Sterilizing takes
55~60minutes.
E, The time of sterilizing is also according the kind of FFB, if the pressure is too high or the time is too long , palm fruit
will be rot, also Resulting in the loss of oil, high temperature can change palm color.
F, Finish sterilizing process, close the steam valve, open the valve lead to Blow-off/down Silencer, can’t open the
sterilizing tank door until discharges out all steam and water.
G, Open the sterilizing tank door, sterilized FFB will fall on the FFB Scraper conveyor. Be transported to next station.
palm oil machine press:
A, The palm fruit is transported to Crush tank by fruit elevator.
B, The fruit in crush tank will be heated to 90~95°C, crush time is 10~20 minutes.
C, The pounded fruit flow into Palm fruit oil presser to press. Oil press cone can control cylinder,
working pressure is 50~70bar, revolving speed of presser main shaft is 12.5 r/min. Meanwhile the
mixture of crude palm oil and water Storage oil tank through crude oil groove. Then oil will be
pumped to Screening filte by oil pump. After filtering take out the oil foam, deposit impurities.
Palm oil flow into Passivating oil tank. The fiber cake and nucleus are eLDLDted from clearance
of cone head drop on Breaking cake auger.
Weighting---Reception--Sterilizing threshing-----Digesting----- Mashing---- Pressing ---- Depositing &Purification
----Filtering ----Palm crude oil
2. Palm kernel recycling and pressing process
Pressing cake ---- Crushing----Separating fiber&kernel ----- Crusher ----- Kernel&peel separator ----Kernel dryer
---- Drying kernel -----Crushing ----- Pressing
Quality and Service Commitment
Our company always put the interests of customers,product quality and service as first ,and always adhere
to the"no best, only better" as our purpose. We will be commitment to provide high quality products with perfect site services and after-sales service. Now the specific commitments are as follows:
1.Ensure provide complete sets of equipment and accessories timely.
2.Ensure that one-time installation debugging acceptance.
3.To provide high quality material with preferential price.
4.Priority to provide customer our new craftworks and products.
5.Free training technological operator to ensure the trained staff can operation independently.
6.In the installation process,we will appoint an installation supervision staff on the spot.
7.we will offer an experienced project manager, organize a good installation team for the work.
Shandong Microwave Machinery Co.,Ltd.is a Small oil machine factory specializing in the production of professional supplier soybean oil expeller machine, scientific research,manufacturing,installation, commissioning.Shandong Microwave Machinery Co.,Ltd.can provide Small oil machinecustomers with design and services of 1-2000 tons professional supplier soybean oil expeller machine. Shandong Microwave Machinery Co.,Ltd. have finished hundreds of successful projects Small oil machineover the years: peanut oil, soybean oil, rapeseed oil, cottonseed oil, sunflower oil, sesame oil, animal oil,grape seed oil, acer truncatum oil, peony seed oil, walnut oil, hemp seed oil, pine oil, tea seed oil, papaya oil, milk thistle seed, and other special type Small oil machineoil. Shandong Microwave Machinery Co.,Ltd. have independent import and export department. Shandong Microwave Machinery Co.,Ltd. Small oil machineequipment has been successfully exported to more than ten countries: Russia, LDtralia, India, Afghanistan, Cameroon,and so on.
Contact us:
Carrie-Sales manager
Shandong Microwave Machinery Co.,Ltd.
Web: www.epier.com
Email: [email protected]
Skype:leaderfoodmachine10
Moblie:0086-15020017267(also WhatsApp)