High oil quality edible oil refinery plant peanut oil refining equipment

High oil quality edible oil refinery plant peanut oil refining equipment produced and supplied by Shandong Microwave Machinery Co.,Ltd.
Small oil machine includes a series processing procedures as degumming, neutralization, bleaching, deodorization and winterisation. In general there are two methods of High oil quality edible oil refinery plant peanut oil refining equipment, one is physical refining and the other is chemical refining by High oil quality edible oil refinery plant peanut oil refining equipment. However, no matter what kinds of reining methods, High oil quality edible oil refinery plant peanut oil refining equipmentare all done with the help of various oil processing equipment and machinery, and Small oil machine are Small oil machine used to refine almost all kinds of oil extracted from oil seeds like sunflower seeds, peanuts , sesame seeds, and soya bean seeds etc.
Main Steps of High oil quality edible oil refinery plant peanut oil refining equipment
1. Crude Oil Degumming of High oil quality edible oil refinery plant peanut oil refining equipment: In this step gums in crude oil are removed by hydration with the help of phosphoric acid.
2. Neutralization of Small oil machine: In this step free fatty acids are neutralized by Small oil machine using sodium hydroxide and convert them into soap. Additional impurities are also removed by LDorption on soap.
3. Bleaching of Small oil machine: During bleaching, unwanted pigments are LDorbed physically and oil will become much clearer.
4. Deodorization of High oil quality edible oil refinery plant peanut oil refining equipment: Deodorization is used to remove unacceptable odors by steam distillation, the odoriferous compound are stripped off with the help of live injected steam into heated oil under high vacuum pressure.
5. Dewaxing (necessary for cold areas) of High oil quality edible oil refinery plant peanut oil refining equipment
Some kinds of oil like sunflower, maize germ or corn oil have waxes inside, if these impurities are not removed by High oil quality edible oil refinery plant peanut oil refining equipment, the oil will freeze easily under low temperature, thus effecting oil quality and appearance. so High oil quality edible oil refinery plant peanut oil refining equipment is necessary in extremely cold areas.

High oil quality edible oil refinery plant peanut oil refining equipment

Product Description

Technological process flowchart:

Peanut oil refining equipment introduction:

Alkali hot water

Crude oil→filter→mix→reactor→mix→reactor→centrifugal separation→oil residue

↑ ↓

Phosphoric acid hot water→mix ↓

↓ ↓

degumming oil←cooler←dry←centrifuge separation←mix←alkali liquor

↓

↓

bleaching earth→mix→decoloring→filter→decoloring oil→mix→heat

↓

refined oil←filter←cool←deodorizing←vacuum

Peanut oil refining equipment process:

(1)Degumming process

a.The purpose of degumming is to remove the phospholipid, sugar, protein, trace mental,

and some other impurities, which have bad effect on the stability of the oil. First, the oil

should be heated to 90to105°C, then put some phosphoric into it and stir.

It mainly transfer the phospholipid to that can be compatible with water. Then

add some salt water to gather the impurities, which subside to the bottom and be discharged.

Deacidification

Add some certain quantity of alkali to neutralize the free fatty acids. During this process,

some soapstock will be produced.The soapstock will be separated from the oil after using

the centrifugal machine.

(2)Decolorization

Mix the oil with activated clay in the oil soil mixing tank, and 1 ton oil needs 5kg clay. Then

stir it 10 minutes at 10°C. Next, pump the mixed oil into the decolorization tower. It use

steam to heat the mixed oil at 100°C, and the process lasts 30-40 minutes.

Filter

The filter capacity can reach 200meshes. First, we use the filter to remove the clay in the oil,

then use the bad filter to purify the oil again. The diameter of the filtering can reach 5μm.

(3)Deodorization

The main purpose of deordorization tower is to remove fatty acid and some odor material.

The principle of the deordorization is to use the high temperature and vacuum to remove

the odor. The fatty acid and odor will be stalled in the storage tank.

(4)Automatic Control System

Our company has applied the automatic control system with advancedness, security, reliability

into the pretreatment, extraction, refining and fractionation in large oil plants. For its application

in automatic control system, it can control the production in the entire workshop and monitor the operational status of each device by controlling the computer terminals in the room. One person

only can operate the entire workshop, with efficient production management. It has reduced the production cost greatly and improved the management efficiency.

Peanut oil refining equipment advantage:

1.By combining several years' practical experience, adopting a kind of unique deguming technology,

extending the phosphoric acid and oil reaction time and adding specific additives, our equipment

can remove phospholipids in oil to the maximum.

2.The new carclazyte automatic quantitative system can produce more reliable oil of good quality, with

less investment for the full vacuum closed refining technology.

3.We can design the optimum refining scheme according to different oils and different requirements

for products.

Peanut oil refining equipment energy cosumption:

The view of our factory:

Customer visitation to our factory:

1.Ensure to timely provide complete sets of equipment and accessories.

2.Ensure that one-time installation debugging acceptance.

3.To provide high quality material with preferential price.

4.Priority to provide customer our new craftworks and products.

5.Free training technological operator to ensure the trained staff can operation

independently.

6.In the installation process,we will appoint a installation supervision staff on the spot.

7.we will offer an experienced project manager, organize a good installation team for

the work of field installation debugging.

8.After the equipment field assembly and installation, we will be also responsible for the

single equipment debugging, online debugging and Feeding trial operation, to ensure

that equipments can normal operate in full load conditions. Packaging & Shipping

Delivery in facyory

Shandong Microwave Machinery Co.,Ltd.is a Small oil machine factory specializing in the production of High oil quality edible oil refinery plant peanut oil refining equipment, scientific research,manufacturing,installation, commissioning.Shandong Microwave Machinery Co.,Ltd.can provide Small oil machinecustomers with design and services of 1-2000 tons High oil quality edible oil refinery plant peanut oil refining equipment. Shandong Microwave Machinery Co.,Ltd. have finished hundreds of successful projects Small oil machineover the years: peanut oil, soybean oil, rapeseed oil, cottonseed oil, sunflower oil, sesame oil, animal oil,grape seed oil, acer truncatum oil, peony seed oil, walnut oil, hemp seed oil, pine oil, tea seed oil, papaya oil, milk thistle seed, and other special type Small oil machineoil. Shandong Microwave Machinery Co.,Ltd. have independent import and export department. Shandong Microwave Machinery Co.,Ltd. Small oil machineequipment has been successfully exported to more than ten countries: Russia, LDtralia, India, Afghanistan, Cameroon,and so on.

Contact us:

Carrie-Sales manager

Shandong Microwave Machinery Co.,Ltd.

Web: www.epier.com

Email: [email protected]

Skype:leaderfoodmachine10

Moblie:0086-15020017267(also WhatsApp)