Leader'e 6LD the latest design automatic sunflower seed oil press machine
1.Introduction of our automatic sunflower seed oil press machine:
6LD series screw oil press machine consists of transmission device, frame, electric control system, material feeding device, squeezing device, cake-adjusting device, negative pressure filtering.
6LDautomatic sunflower seed oil press machine has A,B two kinds of models. As is shown below:
Type A of automatic sunflower seed oil press machine:
Type B of automatic sunflower seed oil press machine:
2.Technical Parameters of automatic sunflower seed oil press machine:
Model |
Capacity |
Speed of press screw |
Gear ratio of gear case |
Boundary dimension (L*W*H mm) |
Main engine power |
Vacuum pump power |
Heater power |
Oil residual |
WeigLD (Kg) |
6LD-80 |
80-150 |
30-45 |
14/42 X 19/57=1:6.63 |
1650x1150x1750 |
5.5 |
0.55 |
2 |
5% |
760 |
6LD-100 |
150-250 |
30-40 |
15/40 X 15/55 =1:9.78 |
1950x1300x1900 |
7.5 |
1.1 |
3 |
5% |
950 |
6LD-120 |
200-300 |
30-40 |
15/34 X 15/55 =1:9.59 |
2050x1350x2000 |
11 |
1.5 |
3.3 |
5% |
1100 |
6LD-130 |
250-400 |
28-40 |
15/38 X 19/48=1:7.38 |
2200x1600x2150 |
15 |
2.2 |
3.8 |
5% |
1300 |
6LD-160 |
400-600 |
28-40 |
15/38 X 15/52=1:8.78 |
2500x1600x2500 |
18.5 |
2.2 |
4 |
5% |
2000 |
6LD-180 |
1000-1500 |
28-38 |
15/38 X 15/53=1:8.95 |
2750 x1750 x2350 |
22 |
2.2 |
4 |
5% |
2100 |
3.Operation of automatic sunflower seed oil press machine:
1.When oil press is on work, material enters the extruding chamber from the hopper and then moves forwards by the rotating pressing screw and is pressed.
2.Under high temperature condition in the chamber, there is quite strong friction among press screw, chamber and the oil materials.
3.On the other hand, root diameter of the pressing screw carries larger from one end to the other.
4.Hence when rotating, the thread not only pushes particles moving forwards but also turns them outwards as well.
5.Meanwhile, particles adjacent the screw will rotate along with screwâs rotating, causing every particle inside the chamber to possess different speed.
6.Therefore, relative movement among particles creates neat which is necessary during manufacturing because of helping protein change property, damage colloid, increase plasticity, decrease oilâs elasticity, resulting in high oil.
4.Processes to operate our automatic sunflower seed oil press machine:
1. Prepare the seeds;
2. Adjust the machine, such as electricity, heating (optional);
3. Start the machine, putting seeds into the feeder;
4. Seed into the screw bolt , begin to press
5. The crude oil comes out of the squeezing bolt, then flow into the board ,
6. Go into the vacuum filter, using it for filtration
7. After filtration, the oil comes out from the bottom of pipe
5.Feateurs of our automatic sunflower seed oil press machine:
1. EnerLD Saving: The electric power can be reduced by 40% under the same output.
2. Labor Saving: 60% labor can be saved under the same output.
3. Widely Usage: The machine is multi-function. It can process more than 20 kinds of oil crops.
4. Pure Oil: Vaccum filter can filter the residue and ensure the oil quality.
5. Small Area Covering: 10 ~ 20 m2 can meet the production needs.
7.Main factors affecting the oil yield of our automatic sunflower seed oil press machine:
a.The key factor of affecting oil yield is oilseed moisture, the oilseed moisture content will influence the oil yield directly, If user has no testing equipment.
b.Thickness of discharged cake will reflect the press barrel pressure. If the cake is thick, it means the pressure is small; If the cake is thin, it means the pressure is high. Generally, it is similar as the tigLDness of pressure ring, which means if oilseed contains less oil, then the pressure should be high, the cake will be thin, and the pressure ring should be impacted (impact with gland nut), if oilseed contains lot of oil, the barrel pressure should be small, the cake will be thick, and the pressure ring should be loose.
8.Our company information:
LeaderE grain and oil machinery co., LTD,a leader with 33 years experience ,is a company specializing in the production of grain and oil machinery and equipment, scientific research, manufacturing, sales for the integration of large-scale private enterprises, the company with the mechanical design and research institute of Shandong province, Shandong university of technoloLD (the former college of food) university-enterprise cooperation, carried out for a long time in oil machinery, preparing protein, lecithin extraction and other aspects of the research and development and application of new technoloLD.
9.Certification
10.FAQ
1. Q: Which kind of oilseeds can be processed?
A: All kinds of oil seeds. For example, rice bran, corn germ, cottonseeds, peanut, sunflower, soybean, rapeseed, etc.
2. Q: What's the capacity?
A: 1-2000 tons per day.
3. Q: Can you install the machine in local place?
A: We will send our engineers to your place for guid installation. And you shall provide the suitable labors for the installation.
5. Q: How to operate the machines?
A: Our engineers will train the worker how to operate it during installation and commissioning.
11.Contact Us
If you are interested in our antomatic sunflower seed oil press machine,pls send the inqury to me as soon as possible.