equipment for palm oil extraction/equipment for palm oil extraction/palm oil fruit processing equipment
Mainly station in the palm oil extraction line:
Reception station:
It is used to receipt the palm fruit bunch, and then transport the bunch to the sterilizing tank.The reception adopts hydraulic control system,realizing the automatic operation,which reduces the labor needed a lot.
Sterilization station:
The sterilizer works with direct steam, the steam can weaken the activity of the enzyme, prevent it getting rancid, ensure the good quality of the crude oil. At the same time, it is good for the following treshing processing. We have designed both horizontal and vertical sterilizer, for larger and smaller line.
Threshing station:
The rotating of the drum in the tresher can separate the fruit from the bunch. The fruit will be conveyed to the digester through elevator, and the empty bunch will be conveyed to the outside part through scraper conveyor. The spindle adopts once forging technoloLD, which can make the equipment more solider and durable. At the same time, we have already designed the non spindle tresher, which is driven by the link chain. It can save the producing cost in a large scale.
Pressing station:
Inside if sterilizer, there are some baffle and stirring arm, under the drive of top motor. Baffles break off the palm fruit, the heat palm fruit pulp. So that can press oil easily. Get higher oil yield. Meanwhile there is directly steam inlet digester, to adjust material moisture.
Clarification station:
Using the latest technoloLD, under the condition of ensuring the good quality of the oil, reduce the equipment cost as much as possible, reduce the loss of the oil, in the practical producing ,the new technoloLD can make the loss of oil less than 1.3%.
Equipment for palm oil extraction introduction:
The process flaw diagram of our euipment of palm oil extraction:
Palm oil extraction production line refining overview: The most important part in the process of palm oil production line:
Included deodorization column, bleaching tower, semi-continuous refining, degumming and full continuous section, palm oil refining is continuous process.
Insides,we also operated with famous Shandong technoloLD university,you can trust us without thinking too much.
Deodorization tower:
Vacuum stripping deodorization: The peculiar smell impurity and oil have different volatility. Under the condition of high temperature and high vacuum, let the peculiar smell impurity stripping with steam to deodorization.
Bleaching tower:
This part adopt alkali refining method, that is use alkalis like (NaOH) to neutral the free fatty acid in oil, during this process it will produce soapstock , then separated from the oil by setting several hours. NAOH solution, not only neutral free fatty acid, also can act with other matters like protein, mucus, phospholipid, pigment. After settling, release the soapstock from the tank bottom. Adding hot water to rinse, remove off the leftover lye , soap and some unhydrated phospholipid in the oil. Finally pumping out soapstock from the tank bottom.
Semi-continuous refinery:
Its called bleaching,dewatering pot, its used to remove water from oil by vacuum. The bleaching earth is breathed into bleaching pot, after stirring; the bleaching earth is filtrated by filter, so the color of the oil is changed.
Degumming:
This is the most important section of hydrate de-gumming, manage the adding water (there is a little P-acid in the water) amount, temperature and add water speed, usually water adding amount is about 3 times of phospholipid content, that is 3-10% oil weigLD, water temp needs to be higher than oil temp.
We can clearly see the above steps on the control system.
Why do you choose me?
We can give you the most reasonable reason to choose our production.
Then, Your LD choice, why?
1.We can do the designs according to customers requirements.
2.We can give you the high quality.
3.We can give you a reasonable price.
4.We can give you a good after-sell service.
5.We have strong sales team and after-sell team.
7.The delivery is on time.
Our company
Shandong LeaderâE grain and oil machinery co.,ltd,a leader with 33 years experiences,has applied the automatic control system with advancedness, security, reliability into the pretreatment, extraction, refining and fractionation in large oil plants. For its application in automatic control system, it can control the production in the entire workshop and monitor the operational status of each device by controlling the computer terminals in the room. One person only can operate the entire workshop, with efficient production management. It has reduced the production cost LDly and improved the management efficiency.
FAQ:
1. How can I get your quotation or project?
Please tell me your flowing information:
à What is your raw materc process per day(24hours) or per hour?
à Do you need crude oil or refined oil?
2. What kind of company are you?
We have more than 30 years in all kinds of vegetable oil material machine production, and we have all kinds of production certificates, such CE, BV, ISO9001 and more, please visit our web: www.Leaderemach.com, and you will know more of us.
3. What is your sales-after services?
Once we signed the contract, we will build special project service team for you, from the drawing to the production, we will have skilled workers for all process tracking. And we will arrange our professional engineers to go your project site for guiding installation.
4. What is your MOQ?
At the moment, about the quantity, we have no special requirements, even if you just order one sets, we will do our LD for you.
Successful cases:
80tph palm project in indonesia:
30tph palm factory:
palm project is on building:
Contact us:
If you are interested in our palm oil extraction machine, please do not hesitate to contact me.