This kind of equipment Incense drying machine possesses several strong points with which the normal methods cannot match. First, this kind of equipment LD incense dryer cabinet,dryer room,dehydrated incense machine can be operated immediately upon its switching on. Second, for without thermal inertia,the microwave equipment Incense drying machine can be operated conveniently. Then, Shandong Leader Machinery Co.,ltd. the drying time and the drying temperature are regulated automatically, so it can save some labors and processes. Especially it is favorable to link it with the upstream and downstream processes as to reduce the carrying frequency. Professional fruit Buddha Incense Heat Pump Dryer Drying Incense drying machine oven operates according to a basic reverse Carnot cycle. The working fluid (refrigerant) at low pressure is vaporized in the evaporator by heat drawn from the dryer exhaust air. Shandong Leader Machinery Co.,ltd. The compressor raises the enthalpy of the working fluid of the heat pump and discharges it as superheated vapor at high-pressure. Heat is removed from the working fluid and returned to the process air at the condenser. The working fluid LD incense dryer cabinet,dryer room,dehydrated incense machine is then throttled to the low-pressure line (using an expansion valve) and enters the evaporator to complete the cycle. In the Incense drying machine dryer system, hot and dry air at the exit of condenser is allowed to pass through the drying chamber where it gains latent heat from the material. Shandong Leader Machinery Co.,ltd. The humid air at dryer exit then passes through the evaporator where condensation of moisture occurs as the air goes below dew point temperature. Then drain the condenser water.
LD incense dryer cabinet,dryer room,dehydrated incense machine
LD Industrial dehydrator introduction:
LD Heat pump dryer takes advantage of the reversed Carnot principle, absorbing the heat from around and sending the heat to the materials which will be dried. This kind of dryer is mainly composed of heat pump dryer and drying chamber. This dryer will be controlled by touch screen controller, and the temperature can be adjusted. It has low electric consumption.
How does it works?
1, Dryer evaporator of refrigerant absorb the air from outside
2, then compressor works that make the air temperature rise
3, heat exchanger change the hot air into drying chamber
4, final vegetables/fruits/seafood/herbs will be dried by the hot air circulating in drying chamber.
NEW TYPE HEAT PUMP DRYER MODEL | |||||||
Items | Unit | JK03RD | JK06RD | JK10RD | JK12RD | ||
Production capacity | 1set | 300kg | 600kg | 1000kg | 1200kg | ||
2 sets | 600kg | 1200kg | 2000kg | 2500kg | |||
Suitable drying chamber size | M3 | 10-30 | 30-40 | 40-50 | 60-70 | ||
Heating capacity | Kw/h | 12 | 26 | 35 | 42 | ||
Cooling capacity | Kw/h | 7.5 | 15 | 25 | 30 | ||
Dehumidification amount | L/H | 10 | 25 | 50 | 60 | ||
Compressor | 2.8 | 5.3 | 9.3 | 11.2 | |||
Evaporator fan motors | 0.78 | 0.78 | 1.5 | 1.5 | |||
Input power | Hot air circulating fan | kw | 2 | 2 | 2 | 2 | |
Dehumidify fan motor | 0.37 | 0.37 | 0.55 | 0.55 | |||
Auxiliary electric heater | 3 | 6 | 9 | 9 | |||
Power supply | kw | 220v/380v | 380v/3ph/50hz or 60hz | ||||
Total running current | A | 35/20 | 30 | 45 | 45 | ||
Max hot air temperature | ℃ | 75 | |||||
Min cooling temperature | ℃ | 8 | |||||
Working ambient temperature | ℃ | -10-45 | |||||
Mixture Refrigerant | kg | 2.5 | 4.5 | 8 | 9.75 | ||
Weight | kg | 210 | 385 | 480 | 500 | ||
length | 1650 | 1730 | 2100 | 2179 | |||
Width | 960 | 1220 | 1460 | 1356 | |||
Dimension | Height | mm | 1280 | 1280 | 1590 | 1930 |
Item | Description |
Product Capacity | Drying Chamber size |
1 | One unit JK03RD dryer +drying chamber | 300kg/batch | 4000*2000*2200 mm |
2 | One unit JK06RD dryer+drying chamber | 600kg/batch | 6000*2800*2200 mm |
3 | One unit JK12RD dryer+drying chamber | 1000kg/batch | 6000*3000*2200 mm |
4 | Two unit JK03RD dryer+drying chamber | 1300kg/batch | 7000*2000*2200 mm |
5 | Two unit JK06RD dryer+drying chamber | 1500kg/batch | 10000*2800*2200 mm |
6 | Two unit JK12RD dryer+drying chamber | 3500kg/batch | 10000*3000*2200 mm |
Key feature
1, Energy saving and environment protection
Adopt close dehumidify + circulatin pollution, low noise
2, Stable property and operating drying type, saving operating cost;
Without waste gas and waste heatg easily
Touch screen full automatic control
Different materials with different drying type, adopt PLC control, can setting different drying curve, suitable for drying different materials.
3, Second waste heat recovery technology(patent)
Adopt air to air heat exchanger dehumidify and recovery waste heat at the same time, saving energy more than 40%.
4, Accurate control temperature and humidity
According to different material setting different drying curve, the heat pump dryer can control the drying chamber temperature between 10~75C.
5, Horizontal Blowing 360ºC
By using the forced ventilation function, there are partition sheet and fan motors inside the drying chamber to make sure hot air cycle, so ensure a high drying efficiency and save energy, lead to a uniform drying.
6, It's batch operation, so can adjust process condition anytime. Thus can change product from time to time
7, Dry material in tray, easy for load and unload, not easy cause any damage for the raw material, clean conveniently.
After-Sales Service
A. Payment service
1, T/T
2, L/C (for container order only)
3, Western Union, (for sample order & parts)
B. Technical service
1, We calculate the capacity and recommend the best models.
2, We supply you the professional refrigeration technical support and electronic technical support for your installation, debugging and operation.
3, We supply the spare parts and technical support in & after the warranty time.
4, We supply the training course to your workers at our factory if you need.
Certifications
If you are interested in our heat pump dryer, please contact us for more information, such as catalogue, video,etc.
Contact person: Windy Mob:+86 18816787275
Shandong Leader Machinery Co.,ltd. buddhist effect heat pump dryer low cost, is the Buddha incense manufacturers the best choice. Buddhist high temperature heat pump dryer Incense drying machine is widely used in various Buddhist drying, good drying effect, can not afford to powder, not crack, not deformed warp, not only energy efficient, but also more concentrated flavor after drying, can drying a variety of Buddhist incense, incense, bamboo stick incense, incense sticks, craft incense, incense coil and so on. LD incense dryer cabinet,dryer room,dehydrated incense machine no staff on duty, not only reduces the labor intensity, and save labor costs,Shandong Leader Machinery Co.,ltd. is the preferred drying Buddhist, Buddhist high temperature heat pump dryer, we are your best choice.Incense drying machine easy installation: install, easy to demolition, small footprint, can be installed in indoor and outdoor;LD incense dryer cabinet,dryer room,dehydrated incense machine energy efficient: only a small amount of electrical energy consumed, it can absorb a lot of heat in the air, the heater power consumption is only 1/3; 1/4; compared with coal, oil, gas drying equipment , can save about 75% of operating costs. 1 kWh of electricity is equal to LD incense dryer cabinet,dryer room,dehydrated incense machine. Environment friendly: without any combustion products and emissions, Incense drying machine in full compliance with food hygiene standards, is a sustainable development of environmentally friendly products.
If you have any demand about microwave drying equipment and edible oil refining equipment, pls feel free contact us any time.
Email:[email protected]
Whatsapp:+86 13064099546
Skype:leaderfoodmachine21
Contact:Mandy
NOTE:We can specially design the machine according to your production's features.