Shandong Leader Machinery Co.,Ltd. cold and hot amphibious screw oil press machine is a new research improvement product.Palm Fruit Processing Line is for oil extraction from oil-bearing materials,such as rapeseed,peanut,tea seed,soybean, sunflower seed,shea butter,palm kernel and so on.Equipped with micro-electrical control,infrared heating and filtration system,2016 New Technology cold pressed organic sesame oil press and sesame oil making machine can press oil through cold press and hot press. Pour raw material to the machine,Shandong Leader Machinery Co.,Ltd. can get pure oil which can be eaten directly.2016 New Technology cold pressed organic sesame oil press and sesame oil making machine is very suitable for individual users.
The specificaitons of 2016 New Technology cold pressed organic sesame oil press and sesame oil making machine:
(1).Cleaning: Our vibration screen and destoner will Remove the raw material peanut in various impurities, such as: iron, stones, clump, such as the plant leaf, clean up after the raw material peanut impurity content should not exceed 0.2%.
(2).Crushing: Oil seed is crushed into 6-8 pieces. In order to meet the requirements of crushing, the peanut is suitable for crushing with the moisture of 7% to 12%.
(3). Softening: The purpose of softening is to adjust the moisture and temperature of oil, and make it soft.
(4).Flaking process: Rolling raw material into flakes, and the purpose is to increae surface area, destroy the peanut cell tissue, shorten the way of oil out from cake.
(5).Drying: Adjust moisture of rice bran to meet the requirement of going to extraction process.
(6).Cooking process: use steam cooking, inject direct steam and cook the flakes to meet the requirement of oil press.
2016 New Technology cold pressed organic sesame oil press and sesame oil making machine
Product Description
The operation and maintenance of screw press machine
Preparations before working
Keep the room temperature between 15~20â, itâll influence the oil yield and oil quality if the temperature is too low.
Get everything ready before start pressing, so it can contribute to feeding, receive oil, clean impurities, dredge hopper and clean machines.
Check the transmission and lubrication system, make sure it can run flexibly and lubricate sufficiently.
After starting the machines, let it run empty. If it lets out stridulation, knocking noise and other off-normal occurrence, stop machines immediately and check the press, you can keep testing after clear the troubles, till the press run stably.
Before oil seeds go into pressing, the moisture should be suitable, the optimal moisture content should be as below:
Peanut: 8~11% soybean: 5~8% cotton seed: 4~6% rapeseed: 6~8%
The ways to distinguish moisture content in the oil seeds:
Cottonseed: It is good when you bite it, and it cracks, shell and kernel are separated, if the cottonseed kernel becomes powder, it is too dry, while itâs too wet if it becomes flakes.
Soybean: it is good to hear the quiet sound when you crunch with front tooth, bit flat with gills teeth. Itâs too wet if itâs bit flat, while itâs too dry while it make larger noise.
Peanut: Usually itâs processed with hot pressing, the barrel should be pre-heating before hot pressing, the peanut should be cooked up to 60â or so, then go to pressing.
Rapeseed: For cold pressing, it is good when you use the fingernail to pinch it and it makes sound, divided into two pieces
Operation
When the machines run freely normally, feed small amount of oilseeds uniformly slowly, so as to grind the machine chamber, checking whether itâs normal or not when the cakes come out. If it canât be discharged smoothly, it may be the reason of too small gap, adjust hand wheel clockwise. If the cakes are discharged too much too fast, adjust hand wheel counterclockwise till it can work normally. Then increase the input capacity gradually, so as to avoid non-uniform feeding, loading rise suddenly, resulting in blockage.
The working temperature of press machine depends on the oil seeds variety and humidity. The higher machine temperature is needed if the input material is too dry, on the contrary, the temperature can be lower. Normally, the oil can be extracted out when the machine temperature is about 60â. The normal production can be started when you can feel itâs hot while you touch the machine body.
Adjust the meal thickness to 0.3mm~1.0mm, adjust nut and increase feeding capacity when it reaches requirement.
Check the cake discharging frequently during the production. Stop feeding when the cake canât be discharged smoothly or non-discharging.
Clean the slag leakage constantly so as to avoid blocking of oil-way. The recycled slag can be feed back to hopper and press again.
During the second pressing, the meal should be broken into 10mm or so pieces, and this can avoid disordered feeding. Normally, soybean is pressed 2 times, peanut and cottonseed can be pressed 2~3 times.
The machine should be stopped immediately and clean it, once the metal or other tough substances are found in the chamber.
Close the bottom spile in the feed inlet and stop feeding 1~2 minutes before stop the machine. Make screw go backward by 2~3 cycles, so the residues can be discharged.
Maintenance service
Lubricate each part with grease or machine oil regularly. The machine oil can be added to common copper sheathing and adjusting screw sheathing after 4~6 working hours. The rolling bearing should be cleaned and refilled grease after 3~4 monthsâ usage.
Inspect press machine after 3~4 monthsâ running.
Inspecting items: adjust the concentric between squeezer shaft and chamber; check the abrasion of spare parts such as worm, cage bar and cake-discharging rings etc. The abrasion of worm usually happens at the last 3 buckles of screw thread. It should be replaced with new ones after the abrasion and it affect the production efficiency. The cage bar may become arc-shaped after abrasion and this will reduce the chamber pressure. When the abrasion loss reaches 2mm, we can change the other side for using. It should be replaced with new one when the both sides are abrased.
Our Services
Palm Fruit Processing Line complete equipment:
Palm fresh fruit bunches--Retort sterilization--Threshing--Oil extraction--filter--Dehydration--To refine
Shandong Leader Machinery Co.,Ltd. independent research and development production of 2016 New Technology cold pressed organic sesame oil press and sesame oil making machine for many years, providing a dedicated oil press palm fruit, palm fruit thresher,sterilization pot palm fruit, palm kernel oil press, palm mashed machines.
The 2016 New Technology cold pressed organic sesame oil press and sesame oil making machine which designed and produced by our research institute, is suitable for 3-15 hectares small farm or processing with supplied materials from outside for individual household, economic and practical, cost recovery soon, very welcome by customers in Africa and South America.
Shandong Leader Machinery Co.,Ltd. is one of the leading Manufacturers and Suppliers of 2016 New Technology cold pressed organic sesame oil press and sesame oil making machine.Shandong Leader Machinery Co.,Ltd. manufacture 2016 New Technology cold pressed organic sesame oil press and sesame oil making machine making machine using cutting-edge technology, Shandong Leader Machinery Co.,Ltd. have many kinds of Palm Fruit Processing Line for you reference,such as 2016 New Technology cold pressed organic sesame oil press and sesame oil making machine ,Shandong Leader Machinery Co.,Ltd. can meet your different requirement in Palm Fruit Processing Line.Welcome to contact Shandong Leader Machinery Co.,Ltd.,contact name:Ms.Myra for a quotation
(Tel/whatsapp:0086-18363092712, Email:[email protected],Skype:leaderfoodmachine2).Welcome to send us your enquiry about capacity for 2016 New Technology cold pressed organic sesame oil press and sesame oil making machine, inform us raw material you want to use for 2016 New Technology cold pressed organic sesame oil press and sesame oil making machine,and specific requirements for 2016 New Technology cold pressed organic sesame oil press and sesame oil making machine.Shandong Leader Machinery Co.,Ltd. will provide you best solution for your project about Palm Fruit Processing Line.