With CE corn germ oil refining line

Shandong Leader Machinery Co.,Ltd. cold and hot amphibious screw oil press machine is a new research improvement product.Palm Fruit Processing Line is for oil extraction from oil-bearing materials,such as rapeseed,peanut,tea seed,soybean, sunflower seed,shea butter,palm kernel and so on.Equipped with micro-electrical control,infrared heating and filtration system,With CE corn germ oil refining line can press oil through cold press and hot press. Pour raw material to the machine,Shandong Leader Machinery Co.,Ltd. can get pure oil which can be eaten directly.With CE corn germ oil refining line is very suitable for individual users.

The specificaitons of With CE corn germ oil refining line:
(1).Cleaning: Our vibration screen and destoner will Remove the raw material peanut in various impurities, such as: iron, stones, clump, such as the plant leaf, clean up after the raw material peanut impurity content should not exceed 0.2%.
(2).Crushing: Oil seed is crushed into 6-8 pieces. In order to meet the requirements of crushing, the peanut is suitable for crushing with the moisture of 7% to 12%.
(3). Softening: The purpose of softening is to adjust the moisture and temperature of oil, and make it soft.
(4).Flaking process: Rolling raw material into flakes, and the purpose is to increae surface area, destroy the peanut cell tissue, shorten the way of oil out from cake.
(5).Drying: Adjust moisture of rice bran to meet the requirement of going to extraction process.
(6).Cooking process: use steam cooking, inject direct steam and cook the flakes to meet the requirement of oil press.

High oil output! corn germ oil refining line with CE

hot water

↓

Crude oil→filter→mix→reactor→mix→reactor→centrifugal separation→oil residue

↑ ↓

Phosphoric acid ↓

↓

degumming oil←dry←heat← ← ← ←

↓

↓

bleaching earth→mix→decoloring→filter→decoloring oil→mix→heat

↓

refined oil←filter←cool←deodorizing←vacuum

(1) Refining section: used to P-acid de-gumming, alkali refining de-acid and water rinsing.

(2) Decoloring section: used to remove off pigments, bleaching oils and grease dehydrate.

(3) Deodorizing section: to remove off the odor components in oil.

(4) Fractionation section: used to remove off the wax in the oil, in order to get the high quality oil.

(5) Heat-transfer oil stove: supply each device production needing heat energy, temperature reach

above 280°C.

(6) Steam generator: produce the needing steam for de-odoring and distillation.

(7) Vacuum pump: supply needing vacuum for dehydrate, de-color, deodor. Vacuum degree can

reach above 755mm Hg.

(8) Press filter: filter clay, filter out clear oil.

(9) Air compressor: blow dry bleached clay, blow empty the leftover oil in the press filter.

1.The degummed oil firstly enters into the heater to be heated to the appropriate temperature (110°C),

and then goes to the bleaching earth mixing tank.

2.The bleaching earth is delivered from the low bleaching box to the temporary tank by wind.

3.The bleaching earth is added by automatic metering and is interlockingly controlled with the oil.

4.The main function of decoloring process is to remove oil pigment, residual soap grain and metal

irons.

5.Under negative pressure, the mechanical mixing method combined with steam mixing will improve

the decoloring effect.

6.The oil mixed with the bleaching earth overflows into the continuous decolorizer, which is stirred

by non-powered steam.

7.The decolored oil enters into the two alternate leaf filters to be filtered.

8.Then the filtered oil enters the decolored oil storage tank through the security filter.

9.The decolored oil storage tank is designed as the vacuum tank with the nozzle inside, so as to

prevent the decolored oil contacting with the air and influencing its peroxide value and color

reversion.

The specification of crude oil

The specification of refined oil

Palm Fruit Processing Line complete equipment:
Palm fresh fruit bunches--Retort sterilization--Threshing--Oil extraction--filter--Dehydration--To refine
Shandong Leader Machinery Co.,Ltd. independent research and development production of With CE corn germ oil refining line for many years, providing a dedicated oil press palm fruit, palm fruit thresher,sterilization pot palm fruit, palm kernel oil press, palm mashed machines.
The With CE corn germ oil refining line which designed and produced by our research institute, is suitable for 3-15 hectares small farm or processing with supplied materials from outside for individual household, economic and practical, cost recovery soon, very welcome by customers in Africa and South America.

Shandong Leader Machinery Co.,Ltd. is one of the leading Manufacturers and Suppliers of With CE corn germ oil refining line.Shandong Leader Machinery Co.,Ltd. manufacture With CE corn germ oil refining line making machine using cutting-edge technology, Shandong Leader Machinery Co.,Ltd. have many kinds of Palm Fruit Processing Line for you reference,such as With CE corn germ oil refining line ,Shandong Leader Machinery Co.,Ltd. can meet your different requirement in Palm Fruit Processing Line.Welcome to contact Shandong Leader Machinery Co.,Ltd.,contact name:Ms.Myra for a quotation
(Tel/whatsapp:0086-18363092712, Email:[email protected],Skype:leaderfoodmachine2).Welcome to send us your enquiry about capacity for With CE corn germ oil refining line, inform us raw material you want to use for With CE corn germ oil refining line,and specific requirements for With CE corn germ oil refining line.Shandong Leader Machinery Co.,Ltd. will provide you best solution for your project about Palm Fruit Processing Line.