Full automatic control 4m-30m length cca acq preservative pressure wood treatment equipment

Full automatic control 4m-30m length cca acq preservative pressure wood treatment equipment

1. The usage of wood treatment equipment

• Wood pressure treatment equipment can be used for wood preservation, wood flame-resistant, wood coloring, mainly for timbers. The wood can be used for 15-50years, the wood can adapt to all kinds of environment.
• Wood pressure treatment equipment apply to be preservation, termite proof and to prevent fungal.

Parameter range:

1) Working pressure: -0.08MPa--3.6MPa

2) Working temperature: 0--200°c

3) Vocuum degree(relative): 0.098MPa

4) Capacity ( one time ): 2 / pot--20 /pot

5) Length: 6-50m

6) Diameter: 1-5m

3. The working principle of wood treatment equipment

Working processes:

• Inicial vacuum: suck air out of tank and wood with vacuum pump and keep the vacuum status 15minute to 1 hour according to treatment aiLD. Vacuum status is good for agent liquid goes into wood.The vacuum degree can be 0.098MPa.

• Agent liquid adding: under condition of vacuum pump agent liquid into tank.

• Pressurizing: when tank is full of agent liquid, pressurize tank with pressure pump. The pressure inside tank will rise slowly to rated pressure.Then keep the tank under rated pressure until wood have absorbed enough agent liquid.

• Pressure discharging: when wood have absorbed enough agent liquid,discharge inside pressure and agent liquid that have not been absorbed.

• Final vacuum: when the rest agent liquid has been discharged,suck air out of tank and wood with vacuum pump again to make redundant.Agent liquid exude from wood. cells or surface to avoild liquid drops.

4. 3D drawing of wood treatment equipment

5. Installation of wood treatmnet equipment

6. The delievry of wood treatment equipment

7. Productions in our workshop of wood treatment equipment

8. ABOUT LD CEREALS&OILS MACHINERY CO.:

♦ More than 60 years manufacture histories.

♦ Largest oil machine manufacturer in China.

♦ 100,000 m² of factory total area and 580 senior engineering technicians.
♦ 23 National patents.
♦ 87 million yuan fixed assets.

♦ 150 million annual sales turnover.

9. LD COMPANY ADVANCED EQUIPMENTS:

10. LD CUSTOMERS VISITING OVER THE WORLD:

11. STATE LEADERS VISITING TO LD:

12. LD OVERSEA EXHIBITION:

If you want to know more information about our project, Please Leave Message on below form and click "send" below. I will reply to you. Thanks!

JHVDJCVJ

Corn Germ Oil Plant manuctured by Shandong Leader Machinery Co.,Ltd.
When oil press operating, the prepared materials enter the pressing chamber from the hopper and then move forwards by the rotating of pressing screw and is pressed by Corn Germ Oil Plant under the high-pressure condition in the chamber, friction between material and chamber will be created, which also created friction and relative movement among material particles, on the other hand, root diameter of the pressing screw carries larger from one end to the other. hence, when rotating,Full automatic control 4m-30m length cca acq preservative pressure wood treatment equipment not only pushed particles moving forwards but also turns them outwards as well, meanwhile, particles adjacent the screw will rotation along with Corn Germ Oil Plant rotating, causing every particle inside the chamber to possess different speed, therefore relative movement among particle creates heat Full automatic control 4m-30m length cca acq preservative pressure wood treatment equipment is necessary during manufacturing. because of helping protein change property, damage colloid, increase plasticity, decrease oil’s elasticity, resulting in high oil productivity.Corn Germ Oil Plant is rich impurity in the crude corn oil,such as fatty acid,waxiness,soap and more,so the crude corn oil have to refine before eating.The flowing is oil refining machine of corn oil plant.

JHVJDCHVJ