Malaysia technology palm oil processing mill manuctured by Shandong Microwave Machinery Co.,Ltd.
When oil press operating, the prepared materials enter the pressing chamber from the hopper and then move forwards by
the rotating of pressing screw and is pressed by Malaysia technology palm oil processing mill under the high-pressure condition in the chamber, friction
between material and chamber will be created, which also created friction and relative movement among material
particles, on the other hand, root diameter of the pressing screw carries larger from one end to the other. hence, when
rotating,Malaysia technology palm oil processing mill not only pushed particles moving forwards but also turns them outwards as well, meanwhile, particles
adjacent the screw will rotation along with Malaysia technology palm oil processing mill rotating, causing every particle inside the chamber to possess different speed, therefore relative movement among particle creates heat Malaysia technology palm oil processing mill is necessary during manufacturing. because of helping protein change property, damage colloid, increase plasticity, decrease oil’s elasticity, resulting in high oil productivity.Malaysia technology palm oil processing mill is rich impurity in the crude corn oil,such as fatty acid,waxiness,soap and more,so the crude corn oil have to refine before eating.The flowing is oil refining machine of corn oil plant.
Corn oil plant main process of Malaysia technology palm oil processing mill:
Step 1.Corn germ oil machinery Degumming with water to remove the easily hydratable phospholipids and metals.
Step 2.Addition of a small amount of phosphoric or citric acid to convert the remaining non-hydralable phospholipids (Ca, Mg salts) into hydratable phospholipids.
Step 3.Neutralising of the free fatty acids with a slight excess of sodium hydroxide solution, followed by the washing out of soaps and hydrated phospholipids.
Step 4.Malaysia technology palm oil processing mill is bleaching with natural or acid-activated clay minerals to LDorb colouring components and to
decompose hydroperoxides.
Step 5.Deodorising to remove volatile components, mainly aldehydes and ketones, with low threshold values Corn germ oil machinery for
detection by taste or smell. Deodorisation is essentially a steam distillation process carried out at low pressures (2-6 mbar)and elevated temperatures (180-220°C).
Palm tree grows in Southeast Asia, Africa, south pacific, and some tropical area in South America. It originated in Africa, was introduced to Southeast Asia in the early 19th century. The wild and half wild palm tree in Africa called dura, and the by breeding, develop a kind named tenera with high oil yield and thin shell. From the 60s last century, almost all the Commercialized palm tree is tenera. Palm fruit can be harvested throughout the year.
Palm Fruit Process
palm oil processing mill----Reception station
Palm fruit oil mill Reception is used for loading the Fresh fruit bunch (FFB) to the palm fruit cage. Adopt hydraulic control system. as our experience, some palm oil pant use concrete structure, but it’s not good for cleaning. Now we adopt steel material, fence structure. Some impurity will drop down to a conveyor, impurity will conveyed to outside. Easy for cleaning.
palm oil processing mill----
Vertical Sterilizer
FFB transported by scraper conveyer fall into sterilizing tank, make FFB soft,get more oil yield. sterilizing time 90~120mins, temperature 130~145℃.Sterilizer can be design as owner’s requirement.horizontal sterilizer or vertical sterilizer for our customer.
palm oil processing mill---
Horizontal Sterilizer
For big scale palm oil mill, we adopt horizontal sterilizer, can produce continued increase the effective.
Sterilizing station adopt high quality material, have characteristics of long time life , Low failure rate, easy maintain, etc.
palm oil processing mill----Thresher Station
Palm fruit thresher in palm oil plant is used for separate empty fruit bunch and palm fruit.According the palm oil mill capacity we can design the thresher capacity, usually we have a spare one, in case one of them not work. Empty fruit bunch from thresher will be conveyed to outside, can be used as fertilizer in palm fruit plantation. Sterilized palm fruit will be convey to next station.In the threshing station, we adopt stell structure, easy clean, easy operate, easy maintain.
palm oil processing mill----Press Station
Pressing station in palm oil plant is include digestor and oil presser.
Sterilized palm fruit from thresher conveyed to digestor. There are blades in digestor, blades will be rolling by motor which is on the top of digestor. Palm fruit peel can be crushed by blades, besides we will fill the steam in digestor for heating. Palm fruit pulp cell can be destroyed under the high temperature condition, after that we can get higher oil yield.
palm oil processing mill----
Screening filter
Clarification in the palm oil station. For crude oil clean, we use screening filter and Decanter Centrifuge to remove the impurity in the crude oil. After process the impurity in the oil can get storage standard
palm oil processing mill---
Decanter Centrifuge
Clarification in the palm oil station. For crude oil clean, we use screening filter and Decanter Centrifuge to remove the impurity in the crude oil. After process the impurity in the oil can get storage standard
Packing & Delivery
Our Company
LD'e GROUP
Zhengzhou QI’E Grain And Oil Machinery Co.,Ltd. Is specialized in researching and developing in palm fruit oil plant, palm oil refinery plant, layout design and equipment design, we can also provide strong technical support. With our development in palm oil process field, our company can offer advanced technology and our market expand to Malaysia and Indonesia and Africa, Our company can offer turn-key project, old palm oil mill update or reconstruction, we can offer abroad engineering service.
LD'e Main Business:
• 10-500T/H oil material first cleaning,drying and storage section turn-key project.
• 100-3000 T/D oil pretreatment, shelling and pre-press workshop turnkey project (soybean hot peeling, bean skin crushing; the soybean extrusion, high oil contained pre-press cake extrusion, and high oil contained embryos puffed; of direct puffed). Rice bran production line turn-key project.
• Leaching workshop turnkey project (Towline extractor, Rotocel extractor, loop type extractor, DTDC separated machine, the full negative pressure evaporation, paraffin wax recovery, leaching workshop degum, phospholipid concentrate).
• 30-1000T/D oil continuous grade two or one physical (chemical) refining production line.
• 10-600T/D sunflower oil, rice bran oil, corn germ oil dewaxing turn-key project
• 10-200T/D Fatty acid esterification production cooking oil production line.
• 1-100T/H Palm Oil Mill Turn-key Plant
30T/H Palm oil processing machinery
Our company contract to build.Contact Information
Shandong Microwave Machinery Co.,Ltd.
Moblie:0086-15020017267(also WhatsApp)
Shandong Microwave Machinery Co.,Ltd.is a Corn germ oil machinery factory specializing in the production of Malaysia technology palm oil processing mill, scientific research,manufacturing,installation, commissioning.Shandong Microwave Machinery Co.,Ltd.can provide Corn germ oil machinerycustomers with design and services of 1-2000 tons Malaysia technology palm oil processing mill. Shandong Microwave Machinery Co.,Ltd. have finished hundreds of successful projects Corn germ oil machineryover the years: peanut oil, soybean oil, rapeseed oil, cottonseed oil, sunflower oil, sesame oil, animal oil,grape seed oil, acer truncatum oil, peony seed oil, walnut oil, hemp seed oil, pine oil, tea seed oil, papaya oil, milk thistle seed, and other special type Corn germ oil machineryoil. Shandong Microwave Machinery Co.,Ltd. have independent import and export department. Shandong Microwave Machinery Co.,Ltd. Corn germ oil machineryequipment has been successfully exported to more than ten countries: Russia, Australia, India, Afghanistan, Cameroon,and so on.