Corn oil machine price
Unlike almost other vegetable oils, corn oil is obtained from the seed that contained 3%-5% oil. the maize germ accounted for about 6% to 7% of the corn granule.
According to the different maize varieties andmaturities ,oil percentage is differernt too, usually it can reach 30%~48%
Method of germ extraction mainly half wet, dry.
Hydrometallurgy of embryo is the corn immersion, so as to achieve the purpose of embryo and starch separation, embryo extracting rate of 85% a 95% of the act,
germ moisture content as high as 60%, oil content of up to 44% 50%.
dry germ extraction without water regulating on Maize by mechanical method, but the corn and wheat germ separation.
Half wet extracting embryo of maize is moistening to a moisture content of 16% - 20%, and then by peeling, crushing and extracting embryo,
the embryo extraction efficiency can reach 85%
Corn oil rotocel extractor process features
1. Adopt stainless steel fixed grid plate and increase the horizontal grid plates, which can prevent the strong miscella from flowing back to the blanking case,
so as to ensure good extraction effect;
2. The rotocel extractor is driven by rack, with unique rotor of balanced design, low rotating speed, low power, smooth operation, no noise and quite low maintenance cost;
3. The feeding system can adjust the rotating speed of airlock and main engine according to the feeding quantity and maintain a certain material level,
which is beneficial to the micro negative pressure inside the extractor and reduce the solvent leakage.
4. The advanced miscella circulation process is designed to reduce the fresh solvent inputs, reduce the residual oil in meal, improve the miscella concentration
and save energy by reducing the evaporation capacity.
5. The high material layer of the extractor helps to form immersion extraction, reduce the meal quality in miscella, improve the quality of crude oil
and reduce the evaporation system scaling.
6. Specially suitable for the extraction of various pre-pressed meals.
Main Economic and Technical Parameters of Rotocel Extractor
(take 300T corn germ extraction as an example)
Capacity |
300T/D |
Residual oil in meal |
≤ 1% (corn germ meal) |
Solvent consumption |
≤ 2Kg/T (No.6 solvent oil) |
Crude oil moisture and volatile matter |
≤ 0.30% |
Power consumption |
≤ 15KWh/T |
Steam consumption |
≤ 280KG/T (0.8MPa) |
Finished meal moisture |
≤ 13% (adjustable) |
Residual solvent in finished meal |
≤300PPM (qualified detonated experiment) |
Corn oil refining machine:
1.Deacidification
Sodium hydroxide antagonize free fatty acids,and subside phospholipids,to remove the insoluble impurities,then after the separation of soapstock, neutral oil was washed in soft water,last drying in vacuum.
2.Decoloration
Corn oil pigments in two categories: one is the natural pigment, such as the carotenoids lutein materials such as chlorophyll, these are easy to bleach,and the other type of the products of organic matter,
these pigments are not easy to be bleached.
3.Dewaxing
Dewaxing can ensure the colour of corn oil to be clear bright at room temperature and frozen temperature. to reduce the oil in the wax content to 10 parts per million to get crystal clear oil.
4.Deodorization
Using high temperature and high vacuum steam stripping method deodorization temperature commonly 180, vacuum degree 9.3 104 Pa can achieve ideal results
NEED corn oil machine price ?
Xin Xiang LD Chemical Equipment Co .,Ltd will provide best professional SOLUTION
and high quality corn oil machine for you.
our workshop
any corn oil machine price ,please call us.