Cold press castor oil for small factory
Main Economic and Technical Parameters of Rotocel Extractor
Capacity |
30-500 T/D |
Residual oil in meal |
≤ 1% |
Solvent consumption |
≤ 2Kg/T (No.6 solvent oil) |
Crude oil moisture and volatile matter |
≤ 0.30% |
Power consumption |
≤ 15KWh/T |
Steam consumption |
≤ 280KG/T (0.8MPa) |
Finished meal moisture |
≤ 13% (adjustable) |
Residual solvent in finished meal |
≤300PPM (qualified detonated experiment) |
What is the oil extraction ?
Extraction is a chemistry way to extract oil from Castor. It makes use of Solvent Extraction Principles ,which makes Number 6 solvent oil come into castor cake .Then oils and fats is dissolved from Mixed oil.
The process of solvent extractor
1. The oil pre-pressed will be put in the leaching plant .Then we add NO.6 solvent oil .
let oil commbined with solvent .The temperature of solvent should be 55-60degree . Then by heating ,through the frist steam pipe ,second steam pipe ,then stripping tower .the solvent will come out from the cake with oil .We heat them , the solvent will change to gas to go ,lefting the oil .
2. As the solvent with some oil and water ,in order to recycle solvent ,we must make it cooling .So we need the condenser .The condenser change solvent to liquid . we seprate the solvent ,oil ,water .And we can recycle solvent .
Principle of seed oil extractoin method
Make use of No 6 solvent oil which can dissolve in the oil and fat .make oil extracted from the flake ,by moist and penetration ,molecule convection ,spread.
Mixed oil evaporation and stripping by steam
Process of this craft
Mixed oil filter - mixed oil stored - first evaporimeter - second evaporimeter - stripping tower - crude oil
Main raw material
Soybean ,peanut ,sesame ,rapeseed ,cottonseed ,palm kernel ,oilve ,corn , rice bran ,Jatropha ,castor etc
Picture
Company image
Contact me
Welcome to order from us