Our Strength
1, Established in 1982, we have more than 30 years experience. Our goal is to be pioneer in
global and oil industry.
2, We have deep cooperation with LD Machine Design Research Institute and LD
University of Technology. Our professor often go abroad attending and oil conference and forum.
3, We have completed service line including technical department, engineering department,
project department, electronic commerce department, domestic trade department and foreign trade department.
After signing contract, we will set up special team including engineers, installation technicians, drawing
designer, business person, after-sales service person, and so on. We will provide one-to-one service.
Our Service
Whole set of equipment for production line.
Motor and power control system.
Installation material.
Installation and test-run.
Drawing of process description, equipment layout, foundation and
hole, construction.
Drawing of power control.
Isolation and painting for equipment.
Water recycling and cooling system outside the plant (i.e. supplementary device).
Staff training and long-term technical service.
Main Business Field
1, 10-500T/H oil material primary cleaning,drying and storage section turn-key project.
2, 100-3000 T/D oil pretreatment, shelling and pre-press workshop turnkey project (soybean hot
dehulling, bean skin crushing, the soybean extrusion, high oil contained pre-pressed cake
extrusion and high oil contained flakes puffed directly). Rice bran turn-key project.
3, 100-3000 T/D leaching workshop turnkey project (towline extractor, rotocel extractor, loop
type extractor,
4, LD separated machine, the full negative pressure evaporation,
5, Paraffin wax recovery, leaching workshop degumming, phospholipid concentration.
6, 30-1000T/D continuous physical (chemical) refining line.
7, 20-3000T/D sunflower oil, rice bran oil, corn germ oil dewaxing turnkey project.
8, 10-200T/D fatty acid esterification edible ol production line.
Available Oil Raw Materials:
Rapeseed oil squeezing process:
1, hot press: a clean - fried rapeseed seed press filtration refined rapeseed oil;
Operating instructions: mesh 30 mesh / inch rapeseed use specifications were screened, the rapeseed impurity is less than 0.5%, and then to softening, softening after rapeseed moisture content of about 9%, and then steaming and frying, steaming and frying makes the oil temperature of 110 - 120 degrees, the water content in L 1.5%, you can enter the press for pressing. Such as the use of the griddle, rapeseed by cleaning the miscellaneous can directly into the cylinder into the frying pan frying pan can be. But adding 2 - 3% of the water in the cooking, fried to 110 to 120 degrees, which can pan hot press press. When you can use the following methods to determine whether rapeseed fried two pieces of wood. Wipe rapeseed, if Shell kernel separation kernel into a dark yellow powder is suitable for Ruo Rencheng, too dry, if the shell is not separate with the benevolence is too wet.
2, cold pressed rapeseed: - - - - clean press filtration refined rapeseed oil;
Instructions: cold pressed the rapeseed cleaning, do not need materials to be fried in a wok, cold pressed rapeseed containing water level will directly affect the efficiency of oil, so the judge oil wet and dry is very critical, general entry before pressing rapeseed moisture control in 5% - 8%, indigenous judgment of rapeseed moisture level can nails squeeze rapeseed if a sound, and divided it into two pieces and oil out of the water right, if the powder loaded with less water is too dry, if into a flat shape, containing high moisture too wet.
In the press process prone to problems: rapeseed oil content of up to 33, 40%, general hot pressing according to the instruction book operation operation does not appear abnormal phenomenon, if cold pressing due to improper operation or fuel moisture discomfort, rapeseed oil press body temperature is poor, slag appear to run, oil return or feed is not smooth phenomenon, then you can reference peanut kernels of cold pressing process.
laboratory
Certifications
Contact with me
At present, vegetable oil refinery equipment, seed oil extraction machine with CE is the most advanced oil press equipment in oil extracting and processing machine. Small scale oil extraction machine is through forced feed by a screw shaft which produce high temperature and pressure under the rotation and squeeze between screw shaft and pressing ring. It is a extracting oil technique that make materials from crush and squeeze to oil and cake, which belongs to physical press.
AAA1
Introduction of vegetable oil refinery equipment, seed oil extraction machine with CE
1)Palm oil mill have main ten parts: Reception Station,Sterilizer,Threshing,Press,Clarification, Kernel Recover, power station, boiler station, water treatment plant, oil storage tank.
2)vegetable oil refinery equipment, seed oil extraction machine with CE use the Fresh Fruit Bunch, because the palm fruit rancidity is very fast, if the rancidity will be influence the palm crude oil acid value, if the acid value is very high, the refining efficiency will drop.
3)Generally speaking, the palm oil mill be mainly located in Nigeria,Malaysia,Indonesia etc..
AAA2
Pressing machine uses hydraulic control system to adjust
spacing between pressing bolts. So it can be suitable for various palm fruit species and guarantee the oil yield.
AAA3
Miss Candy
Skype: leaderfoodmachine9
Mobile: +86 18363700691 (Also WhatsApp & Wechat)
Email: [email protected]