New design soybean oil extruder machine for sale

New design soybean oil extruder machine for sale

1. Soyabean oil extruder machine,equipment Process:

Material embryos extruder Wet meal Evaporation Cooling Product meal packing

Mied oil Filter Negative pressure evaporation Crude oil

Solvent recovery

2.Soyabean oil extruder machine,equipmentFunction:

Leaching system is an oil extruder through soaking or spraying pre-pressed cake by a certain organic solvent. The principle of this part is the different solubility of solvent.

3. Soyabean oil extruder machine,equipment Main parts:

1. Solvent pumps: continuously spray solvent to the rotary-type etractor

2. Roary etractor: Spray and soak the pre-pressed cake with solvent so that oil fats can be diss-olved in solvent(form miscella). After processing, you can get wet meal and miscella (mied oil).

3. LD: usd to separate the solvent from the wet meal.

4. Miscella tank 1st: pump the miscella (oil with solvent) in to the miscella 1st , then add saline water to it. The phospholipid in the miscella will react with the saline water, at last the reactant precipitate, reaching the goal of purifying.

5. Miscella tank 2nd: the purified miscella will be pumped into it.

6. Miscella stripping: it will remove the remaining solvent in miscella. And the solvent will be discharged to condenser for recycling.

7. Condensers: used to cooling the solvent gas separated from the wet meal and miscella for recycling.

4. Soyabean oil extruder machine,equipment Parameters:

5. Soyabean oil extruder machine,equipment Advantages:

1. High oil yield , obvious economic benefit .

2. 1% Residual oil rate in the dry meal .

3. Improving the quality of the meal .

4. Low processing cost , high labor productivity.

6. Certification:

At present, New design soybean oil extruder machine for sale is the most advanced oil press equipment in oil extracting and processing machine. Small scale oil extraction machine is through forced feed by a screw shaft which produce high temperature and pressure under the rotation and squeeze between screw shaft and pressing ring. It is a extracting oil technique that make materials from crush and squeeze to oil and cake, which belongs to physical press.

AAA1
Introduction of New design soybean oil extruder machine for sale
1)Palm oil mill have main ten parts: Reception Station,Sterilizer,Threshing,Press,Clarification, Kernel Recover, power station, boiler station, water treatment plant, oil storage tank.
2)New design soybean oil extruder machine for sale use the Fresh Fruit Bunch, because the palm fruit rancidity is very fast, if the rancidity will be influence the palm crude oil acid value, if the acid value is very high, the refining efficiency will drop.
3)Generally speaking, the palm oil mill be mainly located in Nigeria,Malaysia,Indonesia etc..
AAA2

Pressing machine uses hydraulic control system to adjust
spacing between pressing bolts. So it can be suitable for various palm fruit species and guarantee the oil yield.

AAA3

Miss Candy
Skype: leaderfoodmachine9
Mobile: +86 18363700691 (Also WhatsApp & Wechat)
Email: [email protected]