30TPD Grape Seed/Nut Oil Screw Press Machine
Eating healthy oil, and as healthy people!
Edible Peanut Oil Press Flow Chart
Operation Principles Of Edible Peanut Oil Press Machine
When oil presses operating prepared material enters extruding chamber from the hopper and then moves forwards by the rotating pressing screw and that is pressed. Under the high-pressure condition in the chamber, friction between material and screw, between material and chamber will be created, which also creats friction and relative movement amoong material particles. On the other hand, root diameter of the pressing screw carries larger from one end to the other, hence. When rotating, it not only pushes particles moving forwards but turns the moutwards as well, meanwhile, particles adjacent the screw will rotation along with screw rotating, causing every particle inside the chamber to possess different speed. Therefore, relative movement among particle creats heat which is necessary during manufacturing because of helping protein change property, damage colloid, increase plasticity, decrease oil's elastic resulting hing oil productivity.
Main Technical Parameters Of 30TPD Grape Seed/Nut Oil Screw Press Machine
| Model |
Squeeze worm rotation speed |
Exterior size (mm) |
Capacity | With power(kw) | ||
| Main engine | Vacuum pump | Heater | ||||
| 6YL-80 | 30-45tun/min | 1650x1150x1750 | 80-150kg/h | Y160L-6-5.5KW | Y90S-4-0.55KW | 2KW |
| 6YL-100 | 30-40turn/min | 1950x1300x1900 | 150-250kg/h | Y160M-6-7.5 | Y90S-4-1.1 | 3KW |
| 6YL-120 | 30-40turn/min | 2050x1350x2000 | 200-300kg/h | Y160L-6-11KW | Y100L1-4-1.5KW | 3.3KW |
| 6YL-130 | 28-40turn/min | 2200x1600x2150 | 250-400kg/h | Y180L-6-15KW | Y100L1-4-2.2KW | 3.8KW |
| 6YL-160 | 28-40turn/min | 2500x1600x2500 | 400-600kg/h | Y200L-6-18.5KW | Y100L1-4-2.2KW | 4KW |
| 6YL-180 | 28-38turn/min | 2750 x1750 x2350 | 800-1000kg/h | 6-22kw | 2.2kw | 3kw |
| No. | Lubrication Part | lubricate | Time Span | Replacement Period |
| 1 | Adjusting bolt | Mechanical oil No. 20 | 1-2time/day | |
| 2 | Bevel gear | Mechanical oil No. 20 | 1-2time/day | |
| 3 | Bearing bush | Mechanical oil No. 20 | 1-2time/day | |
| 4 | Gearbox | Mechanical oil No. 20 | 12KG for 1st Runing | six months |
| 5 | Bearing | Grease | Per year |
b. Tightening the screw shaft to its dead end is prohibited before starting or during operating, which might cause slag outlet to contact cake outlet ring, resulting in wearing.
In the case of storage, oil dirt on machines surface and slags on each part need to be taken off. Paint rust-- resisting grease and keep in dry place. Case needs to be covered to prevent dirty foreign particles from entering.
Related Products
Various models of verticle, horizontal (peanut, soybean, rapeseed etc) hydraulic press machine, vacuum oil filter, series of peanut shelling machine, tea seed sheller and other grain and oil processing equpment.
Various types of screw press, new energy-saving pressure oil filter, the new cylinder type tea seed hydraulic press.
Various types of automatic temperature control disply drum seeds frying pan, automatic numerical control electric thermal oil frying cooking pot , cooking pot, cylinder, oil winnowing machine and other equipment for the user to choose.
Our Main Business
• 10-500T/H oil material first cleaning,drying and storage section turn-key project.
• 100-3000 T/D oil pretreatment, shelling and pre-press workshop turnkey project (soybean hot peeling, bean skin crushing; the soybean extrusion, high oil contained pre-press cake extrusion, and high oil contained embryos puffed; of direct puffed). Rice bran production line turn-key project.
• Leaching workshop turnkey project (Towline extractor, Rotocel extractor, loop type extractor, DTDC separated machine, the full negative pressure evaporation, paraffin wax recovery, leaching workshop degum, phospholipid concentrate).
• 30-1000T/D oil continuous grade two or one physical (chemical) refining production line.
• 10-600T/D sunflower oil, rice bran oil, corn germ oil dewaxing turn-key project
• 10-200T/D Fatty acid esterification production cooking oil production line.
Our Services About 30TPD Grape Seed/Nut Oil Screw Press Machine
1.Pre-sale services
1) Selecting equipment type;
2) Designing and fabricating the products in accordance with the special requirements of the clients;
3) Training technical personnel for our clients;
4) Providing construction and technology consultations or working out proper construction schemes for those new, special or difficult projects.
2.Services provided during the sale
Respect our clients; present the clients with ease, relaxation and a surprise; devote ourselves to improve the total value of our clients.
1) Checking products acceptance ahead of delivery;
2) Introducing the service system to our clients.
3. After-sale services
Improve the added value of our products, and let the clients free from the using troubles:
1) Assisting the clients preparing for the first construction scheme;
2) Installing and testing the equipments;
3) Training the first-line operators on site.
Trading Process Of 30TPD Grape Seed/Nut Oil Screw Press Machine
Customer Visit
Our Business Diagram
Contact Us
Send your Inquiry Details in the Below, Click "Send" !
we will reply within 24h!