Specifications
Do you need to convert liquid to solid powder1.Mixed dairy spray drying equipment
2.Mixed dairy spray dryer
Mixed dairy spray drying equipment
1Spray drying is a wide applied process in liquid process shaping and drying industry. 2.Particularly suitable for producing powder, granule or block solid product from solution, emulsion, suspending liquid and pumped paste liquid. Features:1.In hot air stream, 95% to 98% of moisture can be evaporated immediately.2.Quick drying speed:the surface area of material liquid through atomizing is increased greatly.3. Product has good uniformity, fluidity, solubility, high pure, and quality.4.For liquid containing 0~60% of damp(special may be 90%), it can be dried to powder through drying one time.
5.After dried, not necessary to crush, sieve therefore reducing productive procedure .
6.For the size, bulk density and moisture of product can be adjusted within certain scope through exchanging operation condition.
7.large flexibility of operation
8.no high requirement for factory buildings
Technical Data:| specification | LPG | ||||||
| 5 | 25 | 50 | 100 | 150 | 200-3000 | ||
| Tep of inlet air | less than 350°C | ||||||
| Tep of outlet air | 80-90 | ||||||
| (kg/h)Evaporated capacity | 5 | 25 | 50 | 100 | 150 | 200-3000 | |
| Transmitted | Compressed air | By machine | |||||
| (rpm)Rotating speed | 25000 | 22000 | 21500 | 18000 | 18000 | 15000 | |
| (mm)ia. of atomizing disk | 50 | 120 | 120 | 120 | 150 | 180-340 | |
| Heat source | Electricity | Electricity | +Electricity+ steam, oil fuel, gas | + Electricity+ steam | + Electricity+ steam, oil fuel, gas | Solved by customer | |
| (kw)Powder of electric heater | 9 | 45 | 60 | 81 | 99 | ||
| (%)Yield of dry powder (%) | ≥95 | ≥95 | ≥95 | ≥95 | ≥95 | ≥95 | |
| Installation Size for reference | A(mm) | 1000 | 1290 | 1730 | 2500 | 2800 | Decided in accordance with actual condition |
| B(mm) | 2100 | 3410 | 4245 | 5300 | 6000 | ||
| C(mm) | 2300 | 4260 | 4645 | 6000 | 6700 | ||
| φ D(mm) | 1060 | 1800 | 2133 | 2560 | 2860 | ||
| E1(mm) | 1050 | 1200 | 1640 | 2100 | 2180 | ||
| E2(mm) | 1050 | 1200 | 1640 | 2100 | 2180 | ||
| F(mm) | 750 | 1000 | 1250 | 1750 | 1970 | ||
| G(mm) | 530 | 1700 | 1750 | 1930 | 2080 | ||
| H(mm) | 530 | 1300 | 1800 | 2600 | 3050 | ||
| I(mm) | 530 | 1550 | 1600 | 1780 | 1960 | ||