Machines for refined canola oil production line

Machines for refined canola oil production line

Rapeseed generally contains about 19%~22% protein, 38%~48% fats. We provide all machines necessary for a complete Rapeseed oil plant, including pre-treatment machines, press, solvent extractors, refinery machines, etc. Rapeseeds invited by Canada with low erucic acid and glucosinolate is called canola oil.

I. Pre-treatment

Before extracting oils and fats from Rape seeds, the mill needs to prepare it by cleaning, crushing, softening, flaking and cooking. For cleaning, we offer magnetic separator, aspirator or different size cleaning sieves, as shown below, to remove impurities from Rape seeds.

Next, every rapeseed is crushed by centrifugal decorticator, as shown below.

Then, the temperature and moisture of oilseed pieces will be adjusted by conditioner or softening kettle so that they become soft and wet enough for flaking. This step improves their ductility. Below is photo of softening kettle.

The flaking roll will make the wet soft rapeseed pieces into flakes. We have vertical flaking roll, multi-stage flaking roll, hydraulic flaking roll and spring flaking roll etc., as shown below.

Finally, the flakes will be cooked to make tiny oils and fats groups get together to become bigger, and to make them less adhesive, easier to get out of flakes.

II. Solvent extraction

Oils and fats in rapeseeds flakes can dissolve in certain solvent. Therefore, we can immerse pressed fakes in solvent to extract oils and fats. Then remove solvent from wet meal, strip solvent from miscella, and recycle solvent.

Extraction

We’ve percolation extractor, immersion extractor and rotocel extractor, etc., as shown below. The solvent pumps in extractor will continuously spray solvent and soak the rapeseeds cakes in it, so that oils and fats can be dissolved. After that, you get wet meal and miscella (mixed oil and solvent).

Wet meal treatment

Desolventizer toaster with integrated LD-cooler(DTDC) is a system for separating solvent from the wet meal. We've vertical desolventizer toaster, horizontal desolventizer, flash desolventizing system and low temperature desolventizer, etc., as shown below.

Miscella treatment

After extraction, filter the miscella, send it to two evaporators successively, and then to the stripping tower. We’ve raising film evaporator, vapor separator, negative evaporator, normal evaporator, etc. For stripping, we’ve tubular stripping column, disk stripping column, plate stripping tower, filling steam stripping tower, etc. After evaporation and stripping, you get crude rapeseeds oil and desolventized meal. This meal can be used to produce feeds. The crude oil needs to be refined.

Solvent recovery

The solvent vapour from wet meal and miscella will be collected by condensers to be reused. We’ve pipe bundle condenser, spraying condenser, contact condenser, etc., as shown below.

III. Crude oil refining

Crude rapeseed oil has a lot of impurities, such as phosphatide, free fatty acid, pigment, wax, sterol, sands, etc. We have to get rid of these impurities to get edible oil.

Degumming

There are many ways to move the mucilaginous impurities from crude oils and fats, for example, hydration, heating, adding acids, etc. We’ve hydration tank, acid refining mixer, etc., as shown below.

Deacidification

This step is to remove pigment from crude oil to adjust its color. You can adjust according to the requirement of your market. We’ve acid refining tank.

Deodorization

This step is to move unpleasant smell from crude oil. This is an important standard for refined oil. We’ve deodorizing tank.

Solvent Extractor Advantages

1) The material is divided into several independent units on the material bed, which can effectively prevent miscella at all levels from fleeing hither and thither on the material layer and ensure the concentration gradient between several sprays.

2) Immersion area appears in each lattice, which can help achieve better immersion effect.

3) The chain box is supported by track and can prolong the service life of screen deck by not touching it.

4) The towline extractor is driven by world leading double-shaft hydraulic motor, with balance force, reliable operation and less maintenance cost.

Whole set of equipment for palm oil production line.

Motor and power control system.

Installation material.

Installation and test-run.

Drawing of process description, equipment layout, foundation and construction.

Drawing of power control.

Isolation and painting of equipment.

Water recycling and cooling system outside the plant (i.e. supplementary device).

Staff training and long-term technical service.

Main business field

10-500T/H oil material primary cleaning,drying and storage section turn-key project.

100-3000 T/D oil pretreatment, shelling and pre-press workshop turnkey project (soybean hot dehulling, bean skin crushing, the soybean extrusion, high oil contained pre-pressed cake extrusion and high oil contained flakes puffed directly). Rice bran turn-key project.

100-3000 T/D leaching workshop turnkey project (towline extractor, rotocel extractor, loop type extractor,

DTDC separated machine, the full negative pressure evaporation,

Paraffin wax recovery, leaching workshop degumming, phospholipid concentration).

30-1000T/D continuous physical (chemical) refining line.

20-3000T/D sunflower oil, rice bran oil, corn germ oil dewaxing turnkey project.

10-200T/D fatty acid esterification edible oil production line.