High efficiency crude oil refinery plant

High efficiency crude oil refinery plant

1. Introduction of High efficiency crude oil refinery plant

Solvent condensation system combines with evaporation system closely, and evaporative condenser and steam stripping condenser all work under negative pressure.

Non-condensable gas enters the energy saver from the shell of the first evaporator. In energy saver, non condensable gas exchanges heat with condensate from the evaporative condenser.

Finally, the condensate temperature discharged from energy saver is increased, and the solvent separated water from going to the solvent holding tank.

The high temperature makes it unnecessary to be reheated for the recycling, so as to save energy. Non condensable gas from energy saver enters de solventizing condenser, in which a great deal of gas is condensed, and the tail gas is discharged into the final condenser.

The solvent gas from the extractor enters extraction condenser, and the non condensable tail gas enters the final condenser.

For the free gas in final condenser, diversion box, holding tank, underground solvent library and mis cella tank, cool them with low temperatured cold water to recycle most of solvent gas. The tail gas with little solvent goes to paraffin recovery process.

2. Main parts of High efficiency crude oil refinery plant

(1) Solvent pumps: continuously spray solvent to the rotary-type extractor

(2).Roary extractor: Spray and soak the pre-pressed cake with solvent so that oil fats can be dissolved in solvent(form miscella). After processing, you can get wet meal and miscella (mixed oil).

(3). DTDC: usd to separate the solvent from the wet meal.

(4). Miscella tank 1st: pump the miscella (oil with solvent) in to the miscella 1st , and then add 10% saline water to it. The phospholipid and impurities in the miscella will react with the saline wter, at last the reactant precipitate, reaching the goal of purifying.

(5). Miscella tank 2nd: the purified miscella will be pumped into it.

(6). Miscella stripping: it will remove the remaining solvent in miscella. And the solvent will be discharged to condenser for recycling.

(7). condensers: used to cooling the solvent gas separated from the wet meal and miscella for recycling.

3. Main Process of High efficiency crude oil refinery plant

(1) The material (for pretreatment) is sent to rotary extraction by the scraper conveyor. The material will extracted by the solvent or mix oil. After this step, we will get meal and mix oil.

(2) Meal is sent to toaster. Through the toaster, the solvent in the meal will separate from the meal. The solvent goes to condenser and is recycled to rotary extraction.

(3) After the mix oil from the rotary extraction enters into 1st evaporator and 2nd evaporator, most of the solvent in the mix oil is separated.

(4) The mix oil from 2nd evaporator goes to stripping tower and almost all the solvent is separated. From the stripping tower, we can get crude oil and solvent. The solvent is sent to condenser and is recycled to rotary extraction.

4 . Advantages of High efficiency crude oil refinery plant

(1) High oil yield , obvious economic benefit .

(2) Residual oil rate in the dry meal .

(3) Improving the quality of the meal .

(4) Low processing cost , high labor productivity.

Package: Wooden case or plain packaging for High efficiency crude oil refinery plant.

Shipment: By sea, 20GP, 40HQ or 45HQ for High efficiency crude oil refinery plant.

Pre-sale

System evaluation: 1. Project basic situaction

Solution: 1. The investment budget 2. Site measurement 3. Technical discussion

Product selection: 1.Factory inspection 2. Site measurement 3. Technical discussion 4. Supply professional drawing and lists

Win-win cooperation: 1. Sign the contract 2. Wstablish mutual benefit, strategic cooperative partnership.

In-sale

Design evaluation: 1. Detailed technical assessment, arrangement 2. Design of process and equipment layout

Procurement: Strictly inspection, optimized selection.

Installation: 1. Quality and quantity guaranteed 2. Completion of hand over

Acceptance: 1. Acceptance test 2. Accepted deliverables

Technical traning: 1.On-site installation and products training 2. Operation skills training 3.Maintenance training 4. Centralized technical training

After-sale

Technical service: Long time technical service

Accessories supplying: Supplying spare parts with cost

Complaint handling: 12-24 hours response mechanism

Client Review: 1. Call-back 2. Regular return visit.

1.What’s your payment terms?

Our payment terms is 40% T/T as down payment, 60% by irrevocable L/C at sight or T/T before delivering

2. What’s your Guarantee?

We provide 1 year complete Guarantee and life-time maintenance service

3. How about the installation?

We will dispatch our technicians to your factory to guide you installation and commissioning work and training your operator.

If you have any needs or enquiries, please feel free to contact us!

Delivery:
Small machine, we support TNT, DHL, FedEx,UPS.
Big machine, we support delivery by ship.
We can also deliver the machine to your agent in china if you have.

Warranty
1. We guarantee the item is “Brand New”, never been used and in perfect working condition.Every item will be tested carefully before shipping out.
2. Sometimes due to the mishandling in transportation, some parts may loose, the machine will not work properly.In this case, please be patient, we will tell how to do it.
3. How to deal with product damage: if the package arrives in bad condition, please take packaging pictures before unpacking, and check the goods in front of the staff of shipping company, in case it is damaged in transportation due to rude handling. Contact us within 3 days if the product damaged, and please allow time for us to handle with the problems, we will try our best to solve it.

Shandong Leader Machinery Co.,ltd.'s after-sales service
For the whole High efficiency crude oil refinery plant,warranty is 12 months,within 12 months,if have equipment quality problems,we will provide accessories freely. After the expiration of the warranty
period,if have spare parts problem,we only receive the cost of required replacement parts.We commit we will provide free technical support of equipment all whole life.

Welcome to enquiry!

Our company has engaged in producing and exporting High efficiency crude oil refinery plant for many years, and until now, our machine has exported to overseas market, such as Brazil, India, Indonesia, Russia, Thailand and so on, and get the foreign customers' unanimous praise.
Shandong Leader Machinery Co.,ltd. equipment installation, commissioning of the date of the beginning, 12 months for the quality of warranty, life-long technical services. As the equipment is non-standard equipment, the above is for reference only, welcome new and old customers call us or visit our company directly to discuss cooperation.
We believe that you purchase Shandong Leader Machinery Co.,ltd. High efficiency crude oil refinery plant is your best and sensible choice.

CONTACT:MISS ANNA
TEL: +86 0531 85064681
PHONE: +0086 15764119982(ALSO WHATSAPP & WECHAT)
EMAIL:[email protected]
SKYPE: LEADERFOODMACHINESALES6