LD'e company sunflower oil making machine with CE&ISO9001

Shandong Leader Machinery Co.,ltd. For Increasing demand of improving oil quality from the oil shop, Shandong Leader Machinery Co.,ltd. has developed this refining plant Oil process machine manufacturer, it can realise the Degumming, deacidification, decolorization, Dehydration, oil after refining plant LD'e company sunflower oil making machine with CE&ISO9001 can reach National Level 2 standard, Shandong Leader Machinery Co.,ltd. has be welcomed by clients all over the world. Shandong Leader Machinery Co.,ltd. are a professional manufacturer of various machines Oil process machine manufacturer for 14 years. Our main products LD'e company sunflower oil making machine with CE&ISO9001 includes Block making machine, concrete mixer, dry mortar mixer, charcoal machine, Coal briquette machine, Wood Crusher, Oil press machine, Biomass briquette machine, food machinery, etc.With 6 years exporting experience, Shandong Leader Machinery Co.,ltd. are now the leading supplier in middle China now, our products LD'e company sunflower oil making machine with CE&ISO9001 has been exported to more than 55 countries in the world. Clients profits go first is our principle. We have good faith in working with you and we are sure Shandong Leader Machinery Co.,ltd. team is one of your LD Choices in China.

LD company sunflower oil making machine

1. Introduction of LD company sunflower oil making machine

Solvent condensation system combines with evaporation system closely, and evaporative condenser and steam stripping condenser all work under negative pressure.

Non-condensable gas enters the energy saver from the shell of the first evaporator. In energy saver, noncondensable gas exchanges heat with condensate from the evaporative condenser.

Finally, the condensate temperature discharged from energy saver is increased, and the solvent separated water from going to the solvent holding tank.

The high temperature makes it unnecessary to be reheated for the recycling, so as to save energy. Noncondensable gas from energy saver enters desolventizing condenser, in which a great deal of gas is condensed, and the tail gas is discharged into the final condenser.

The solvent gas from the extractor enters extraction condenser, and the noncondensable tail gas enters the final condenser.

For the free gas in final condenser, diversion box, holding tank, underground solvent library and miscella tank, cool them with low temperatured cold water to recycle most of solvent gas. The tail gas with little solvent goes to paraffin recovery process.

2. Main parts of LD company sunflower oil making machine

(1) Solvent pumps: continuously spray solvent to the rotary-type extractor

(2).Roary extractor: Spray and soak the pre-pressed cake with solvent so that oil fats can be dissolved in solvent(form miscella). After processing, you can get wet meal and miscella (mixed oil).

(3). DTDC: usd to separate the solvent from the wet meal.

(4). Miscella tank 1st: pump the miscella (oil with solvent) in to the miscella 1st , and then add 10% saline water to it. The phospholipid and impurities in the miscella will react with the saline wter, at last the reactant precipitate, reaching the goal of purifying.

(5). Miscella tank 2nd: the purified miscella will be pumped into it.

(6). Miscella stripping: it will remove the remaining solvent in miscella. And the solvent will be discharged to condenser for recycling.

(7). condensers: used to cooling the solvent gas separated from the wet meal and miscella for recycling.

3. Main Process of LD company sunflower oil making machine

(1) The material (for pretreatment) is sent to rotary extraction by the scraper conveyor. The material will extracted by the solvent or mix oil. After this step, we will get meal and mix oil.

(2) Meal is sent to toaster. Through the toaster, the solvent in the meal will separate from the meal. The solvent goes to condenser and is recycled to rotary extraction.

(3) After the mix oil from the rotary extraction enters into 1st evaporator and 2nd evaporator, most of the solvent in the mix oil is separated.

(4) The mix oil from 2nd evaporator goes to stripping tower and almost all the solvent is separated. From the stripping tower, we can get crude oil and solvent. The solvent is sent to condenser and is recycled to rotary extraction.

4 . Advantages of LD company sunflower oil making machine

(1) High oil yield , obvious economic benefit .

(2) Residual oil rate in the dry meal .

(3) Improving the quality of the meal .

(4) Low processing cost , high labor productivity.

1.Packed by the protect film inner, water-repellent plastic outside.

2.The wood packing is necessary if send by less than a container.

3.Generally, shipped by high cubic container,such as 20 feet,40 feet.

4.Based On this condition,we should make sure it is in good condition when arrived destination.
5.According to the customer requirement

1. Q: Which kind of materials can be processed?

A: All kinds of oil seeds. For example, rice bran, corn germ, cottonseeds, peanut, sunflower, soybean, rapeseed, etc.

2. Q: What's the capacity?

A: 5-2000 tons per day.

3. Q: The materials of our machine?

A: The stainless steel and carbon steel.

4. Q: Can you install the machine in local place?

A: We will send our engineers to local place to help installing the machine.

5. Q: How to operate the machines?

A: Our engineers will train the worker how to operate it after running.

Shandong Leader Machinery Co.,ltd. Adjust the machine, i.e. checking electricity, beginning heating (if it is cold pressing,heating is not needed.).Shandong Leader Machinery Co.,ltd. Open the machine, put seeds into the hopper.While pressing of oilseeds, crude oil flowed thought the board then into the vacuum filters; and cakes discharged from outlet;LD'e company sunflower oil making machine with CE&ISO9001 Once finished oil pressing, press stop button, then operation finished.The material (for pretreatment) is sent to rotary extraction by the scraper conveyor Oil process machine manufacturer. The material will extracted by the solvent or mix oil LD'e company sunflower oil making machine with CE&ISO9001. After this step, we will get meal and mix oil.Meal is sent to toaster. Through the toaster LD'e company sunflower oil making machine with CE&ISO9001, the solvent in the meal will separate from the meal. The solvent goes to condenser and is recycled to rotary extractor.The mix oil from 2nd evaporator goes to stripping tower and almost all the solvent is separated. From the stripping tower, we can get crude oil and solvent. Oil process machine manufacturer The solvent is sent to condenser and is recycled to rotary extraction.

If you have any demand about microwave drying equipment and edible oil refining equipment, pls feel free contact us any time.
Email:[email protected]
Whatsapp:+86 13064099546
Skype:leaderfoodmachine21
Contact:Mandy

NOTE:We can specially design the machine according to your production's features.