20-2000T cotton seed oil production plant with CE

The production capacity of a 20-2000T cotton seed oil production plant with CE is between 1.5 and 10 kg of solid per m2 of filtering surface. For every filter press model, the chamber volume and the filtering surface depend on the number of Cooking oil making machine of complete set certificated by CE ISO BV plates.In practical terms pressing times are less then four hours. Filtration time depends on:cake thickness,sludge concentration,specific resistance,compressibility coefficient.One of the advantages of the Shandong Leader Machinery Co.,ltd. is that it can accept sludge with average filterability. 20-2000T cotton seed oil production plant with CE is always advantageous to optimally thicken sludge before filter press operations.When the Cooking oil making machine of complete set certificated by CE ISO BV has stopped, the filtrate circuits and central duct, which is still filled with liquid sludge, are purged by compressed air.Shandong Leader Machinery Co.,ltd. Washing of clothes should be carried out every 15-30 processing oprations. For mid- or large units this take place on press using water sprayers at very high pressure (80-100 bar).

Specifications

Cotton Seeds Oil Production Plant

The whole cotton seed oil production plant contains three workshops: cottonseeds pretreatment workshop, cottonseeds oil extraction workshop and cottonseeds oil refining workshop.

1. Craft flow for cottonseeds oil pretreatment workshop

cottonseeds → magnetic box → cleaning → flaking roll → cooker → oil press or prepress → to extraction workshop

Main Equipments:

1. Cottonseeds: It’s a new kind of oil seeds for human. This oil also can be made to biodiesel. The oil content of cottonseeds is about 33-40%.

2. Magnetic box: Clearing the iron impurity which might be in the cottonseeds. The iron impurity will be harmful to the following machines, so we need take the iron impurities out.

3. Cleaning: This parts have different size cleaning sieves to clean the different impurities. After going through this part, most of the impurities are moved from cottonseeds.

4. Cooker: This machine can adjust the water content of the cottonseeds. It’s also good for the press and oil extraction section.

5. Press: The press machine is used to take parts or all of the oil in the cottonseeds seed. We will design the suitable machine according to your requirement.

2.Craft flow for cottonseeds oil extraction workshop

solvent

↓

extractor → mixed oil → 1st and 2nd evaporation → stripping tower → crude cottonseeds oil

Wet meal → DTDC toaster → cottonseeds cake

Main Equipments:

1. Solvent pumps: continuously spray solvent to the rotary-typr extractor.

2. Roary extractor: spray and soak the cottonseeds cake with solvent so that oil fats can be dissolved in solvent (form miscella). After processing, you can get wet meal and miscella (mixed oil).

3. DTDC: used to separate the solvent from the wet meal.

4. Miscella tank 1st: pump the miscella ( oil with solvent) into the miscella 1st, then add 10% saline water to it. The phospholipid and impurities in the miscella will react with the saline water, at last the reactant precipitate, reaching the goal of purifying.

5. Miscella tank 2nd: the purified miscella will be pumped into it.

6. Miscella stripping: it will remove the remaining solvent in miscella. And the solvent will be discharged to condenser for recycling.

7. Condensers: used to cooling the solvent gas separated from the wet meal and miscella for recycling.

3. Craft flow for cottonseeds oil refining workshop

Crude cottonseeds oil → degumming and deacidification→ decolorization →deodorization → refined cottonseeds oil.

Main Process:

1. Degumming and deacidification: The gumming is moved by phosphoric acid and hot water. There are two ways to move the acid in the cottonseeds oil. One is chemical way, the other one is physical way. The chemical way is using NaOH to react with acid. This way is suitable for the capacity of 5-30T per day. The physical way is using steam and centrifugal to move the acid. This way is used for capacity from 30-2000T per day.

2. Decolorization: This step is used to adjust the color of the oil. You can control the color of the cottonseeds oil according to the requirement of your market.

3. Deodorization: The function of this step is to move the special smell in the oil. This is an important standard for refined cottonseeds oil.

the specification of crude cottonseeds oil

the specification of refined cottonseeds oil

After finish degumming process about 20-2000T cotton seed oil production plant with CE, at once add into lye carrying alkali refining deacid, lye concentration 16 ° Be ′, super alkali is 0.1to0.3% oil weight, after finish adding, continuous stirring 30min, when soap particles accumulated condensing, should reduce stirring speed, 30r/min avoid emulsion. After adding alkali, gradually rising temp to the end temp 65 ° C, see to that the rising temp speed should control at 1 degree per minute, not too fast. Shut off neutral pot drive part, theoil settled in the pot 6-8 hours, make oilseparate from soap.

If you have any demand about microwave drying equipment and edible oil refining equipment, pls feel free contact us any time.
Email:[email protected]
Whatsapp:+86 13064099546
Skype:leaderfoodmachine21
Contact:Mandy

NOTE:We can specially design the machine according to your production's features.