The production capacity of a 30-600T/D palm oil processing machine for oil refining with fractionation is between 1.5 and 10 kg of solid per m2 of filtering surface. For every filter press model, the chamber volume and the filtering surface depend on the number of Cooking oil making machine of complete set certificated by CE ISO BV plates.In practical terms pressing times are less then four hours. Filtration time depends on:cake thickness,sludge concentration,specific resistance,compressibility coefficient.One of the advantages of the Shandong Leader Machinery Co.,ltd. is that it can accept sludge with average filterability. 30-600T/D palm oil processing machine for oil refining with fractionation is always advantageous to optimally thicken sludge before filter press operations.When the Cooking oil making machine of complete set certificated by CE ISO BV has stopped, the filtrate circuits and central duct, which is still filled with liquid sludge, are purged by compressed air.Shandong Leader Machinery Co.,ltd. Washing of clothes should be carried out every 15-30 processing oprations. For mid- or large units this take place on press using water sprayers at very high pressure (80-100 bar).

Specifications

palm oil processing machine

1.business scop

It is a modern and one of the most advanced oil extraction equipment that fixed grid of stainless steel plate extractor. Retained its low power consumption, reliable operation of equipment , long life ,easy maintenance, good benefits leaching effect compared with traditional false bottom and extractor.

1. 10-50t/d semi-continuous refining equipment of rice bran oil and high acid value oil (national patent: ZL200910041348.4).
2. 1-10t/d small scale 1-2 grade oil refinery.
3. 30-50t/d automatical continuous first grade oil refining equipment.
4. 10-2000t/d complete oil material pretreatment and pre-pressing.
5. 5-1000t/d complete bio-diesel from vegetable&animal oil & hogwash oil.
6. 5-20t/d small size energy saving oil extraction equipment.
7. 20-1000t/d medium/large scale edible oil extraction plant.
8. 20-1000t/d corn grains oil extraction complete equipment (national patent).

Main equipments

Heat exchanger, Gas chromatography, heater, combined-type deodorization tower, fatty acid capture device, cooler, level 4 steam injection pump, heat conduction oil furnace units

Daily treatment : 30T, 50T, 80T,100T,150T, 200T, 300T, 450T, 600T, 800T. As your requirement

Notice to customer

Please kindly inform us your required daily capacity, treated quantity, raw material, covering space and related data.

2. features

2.1Safety:

1. With auto welding machine for the machine, it can not only greatly improve working efficiency but also guarantee the welding quality.

2. Specific operating tech to deal with all the bug during the production (free for our customers).

3. Professional thermometer, pressure gauge and safey explosion-proof valve.

4.The third generation of heating method which combines the advantages from direct and indirect heating . It is safe for the operation.

5.It is dangerous to burn exhaust gas (C1 to C4) without any safety measures. but we special design which is hydroseal and gas gun .It is not only guarantee the safety but also can save the fuel.

2.2Long service life

1.Material: Q245R/345R special steel plate ,thickness 16 mm.

2.Welding: Automatic welding machine and experienced welder will guarantee the quality and life of the reactor.

3.The life of the reactor will be 5-6 years. One of our customers in Phlippines has approved it.

2.3Energy saving:

1. Well sealing for heating system and specific operating tech to heating which can improve the output rate by 5%

2. The exhaust gas will be recycled for reactor heating, this system will enable you don't need to add fuel after there is gas vapour generated during the production of tire pyrolysis machine.

3.The third generation of heating method which combines the advantages from direct and indirect heating. This heating method can save 30%fuel and time for processing.

3. procedures

(1)pump crude oil into refining tank and heat with conduction oil, and the temperature will reach about 70°C-80°C after one hour.
Add acid or alkali to separate according to the acid value. After one hour's processing and 4-6hours deposit, then convey soap stock to storage tank.
(2)Pump refined oil into decoloring tank. When it is up to 90-110°C after one hour's heating, add clay into tank for 20min's processing. Then separate clay and oil with filter.

(3)Put discolored oil into deodorization tank with vacuum pump. Heat and process with steam for odor removal. After filtering, you will get final oil product.

pictures about US

transportation

visitors flied to us

Your inquiry will be much appreciated and your visit gonna be a journey of fun!

this is Mandy from LDgroup. contact me if you read.

After finish degumming process about 30-600T/D palm oil processing machine for oil refining with fractionation, at once add into lye carrying alkali refining deacid, lye concentration 16 ° Be ′, super alkali is 0.1to0.3% oil weight, after finish adding, continuous stirring 30min, when soap particles accumulated condensing, should reduce stirring speed, 30r/min avoid emulsion. After adding alkali, gradually rising temp to the end temp 65 ° C, see to that the rising temp speed should control at 1 degree per minute, not too fast. Shut off neutral pot drive part, theoil settled in the pot 6-8 hours, make oilseparate from soap.

If you have any demand about microwave drying equipment and edible oil refining equipment, pls feel free contact us any time.
Email:[email protected]
Whatsapp:+86 13064099546
Skype:leaderfoodmachine21
Contact:Mandy

NOTE:We can specially design the machine according to your production's features.