Shandong Leader Machinery Co.,ltd. is a commitment to sales of food/chemical products/pharmaceutical disinfection drying Industrial microwave equipment, international trading Company. Our machines are high in automation, environmental protection and enerLD saving. Shandong Leader Machinery Co.,ltd. Owns more than 200 national intellectual property patents, has a professional quality supervision team and a sound management system. Microwave equipment is an emerging industry, many companies do not have quality standards, and we have developed a set of industry standards, and in the relevant regulatory bodies for the record. We have complete supporting facilities, including CNC, CNC bending machine, in line with GB5226 electrical safety standards.
LDjLDvjhfv
As a trustworthy international trading company, Shandong Leader Machinery Co.,ltd. Not only provide high-quality microwave drying sterilization equipment, customized turnkey solution is one-stop service. Procurement advice, floor plans, operational training and life-long free technical support are provided by our professional and technical personnel.
Shandong Leader'E Grain and Oil Machinery Co.,Ltd.
| The picture for cashew nut oil manufacturers |
| The introduction for cashew nut oil manufacturers |
* Extraction process
The pre-pressed cake or flake, firstly enter into the sealed scraper blade to avoid
the solvent gas escaping because of the section without screw blade in the sealed auger.
Material seeds enter into the box-chained loop type extractor counter-currenting with
the solvent, the grease is extracted.
Miscella condnesity increase from 2% to more than 25%.
Miscella discharged from extractor and into miscella filter, then the leached meal
in the miscella tank enter into evaporation system through the first evaporation
feed pump and finally drop-in DTDC out from wet meal drag conveyor.
*Evaporation process
Using the secondary steam desolventized from DTC desolventizer and produced by
steam-jet pump to heat and evaporate micella in the first long-tube evaporator.
Export temperature reaches to 58-62°c and condensity reaches to more than 65%.
Then, micella enters into the second long-tube evaporator in which the temperature
is heated to 105-110°c by indirect steam and the condensity reaches to more than 95%.
Then miscella enters into stripper in which residual solvent in oil will be removed,
the export temperature reaches to about 105°c and the general volatile of the
extracted crude oil is less than 0.30%.
*Desolventizing process
Wet meals discharged from the bottom of extractor enter the top of DTDC and
land on the predesolventizing trayers where thery are heated by the indirect steam,
thus, some solvent in meal is evaporated and meal temperature is risen.
Predesolventized meals land on predesolventizing trayers where they use the second
steam in desolventizing trayers to predesolventize solvent from meal, then meals enter
desolventizing layers in which direct steam is injected.
Direct steam is sprayed into the meals through the bottom holes, and distill the
solvent from meal by using steam in order to remove all solvent.
Desolventized meals land on the following drying and cooling layer to dry and cool meals,
cooled meals land on meal scraper blade from automatic material controlling gate on the
bottom of cooling layer, and then they are entered into meal storehouse.
*Condensation recovery process
Extractor is equipped with a separate condenser, first and second evaporation share
one condenser. Low and high temperature of solvent gas both from first and second
evaporation enter into the condenser after its neutralization, which LDly reduces
the load of condenser and improves the efficiency of condensing.
Stripping and analyzing share one condenser, the non-condensable gases from extractor
and other condensers enter into the vent gas recovery system through the final condenser.
In the recycling system, the cold paraffin will absorb the solvent gas and the final
nonsolvent gas will be discharged through fire resistance valve.
Paraffin absorbed the solvent gas can be also called rich oil, after heating by oil-oil heat
exchanger and steam, the rich oil will enter into desorber for desorption,
and into condenser after changing solvent into gas,
the final cooled paraffin can be recycled.
| Technical Parameters for cashew nut oil manufacturers |
| Steam consumption | 200kg/ton oil |
| Electric consumption | 28kwh/ton oil |
| Water(soften water) | 150kg/ton oil |
| Phosphoric acid | 2~3 kg/ ton oil |
| Alkali | acid valuex 1-3kg/ ton oil |
| Circulating water cooling water yield | 150m3/h |
| Bleaching earth consumption | 3-5kg/ ton oil |
| Waste bleaching earth oil content | ≤25~35% |
| Refining losses |
acid valuex 1.2 (chemical refining) acid valuex 0.6 (physics refining ) |
| Bleaching losses | the quantity of bleaching earth x 0.25% |
| Deodorization loss consumption | ≤0.5% |
| Refining rate | 1-refining consumption |
| Advantages for cashew nut oil manufacturers |
* Absorbing the world's leading core extraction technoloLD, design and develop
a process which is efficient, economical and reliable. Adopting box-chained loop
type extractor can effectively achieve low residual oil, low solvent consumption
and low failure rate of equipment.
* Full automatic computer control system is adopted in extracting process,
adjust automatically and operate stably.
* Negative pressure technoloLD is adopted in condensate system.
* Stainless steel heat exchange tubes and multistage baffling make the condenser
have a high heat transfer effciency, also the water consumption is low.
| Certificate |
If you are in the market for cashew nut oil manufacturers,
please contact with Joanna ^ 6^
Mobile: 0086 13526828605 ( welcome to add my whatsapp and viber )
SDVVXCC
Edible Oil Filling Line manuctured by Shandong Leader Machinery Co.,Ltd.
Edible Oil Filling Line 10-500T/H oil material first cleaning,drying and storage section turn-key project.
bottom price canton fair Leader'E brand cashew nut oil manufacturers 100-3000 T/D oil pretreatment, shelling and pre-press workshop turnkey project (soybean hot peeling, bean skin crushing; the soybean extrusion, high oil contained pre-press cake extrusion, and high oil contained embryos puffed; of direct puffed). bottom price canton fair Leader'E brand cashew nut oil manufacturers
KHBHBSSD
Leaching workshop turnkey project Edible Oil Filling Line(Towline extractor, Rotocel extractor, loop type extractor, DTDC separated machine, the full negative pressure evaporation, paraffin wax recovery, leaching workshop degum, phospholipid concentrate).
30-1000T/D oil continuous grade two or one physical (chemical) refining bottom price canton fair Leader'E brand cashew nut oil manufacturers.
10-600T/D sunflower oil, rice bran oil, corn germ oil dewaxing turn-key project
10-200T/D Fatty acid esterification production Edible Oil Filling Line.
JHVGCD