High quality sunflower oil factory

Shandong Leader Machinery Co.,ltd. is a commitment to sales of food/chemical products/pharmaceutical disinfection drying Industrial microwave equipment, international trading Company. Our machines are high in automation, environmental protection and enerLD saving. Shandong Leader Machinery Co.,ltd. Owns more than 200 national intellectual property patents, has a professional quality supervision team and a sound management system. Microwave equipment is an emerging industry, many companies do not have quality standards, and we have developed a set of industry standards, and in the relevant regulatory bodies for the record. We have complete supporting facilities, including CNC, CNC bending machine, in line with GB5226 electrical safety standards.
LDjLDvjhfv
As a trustworthy international trading company, Shandong Leader Machinery Co.,ltd. Not only provide high-quality microwave drying sterilization equipment, customized turnkey solution is one-stop service. Procurement advice, floor plans, operational training and life-long free technical support are provided by our professional and technical personnel.

High quality sunflower oil factory

Parts of Abroad Oil Production lines

Sunflowerseed→cleaning →cracking→flaking→cooking→pressing→pre-pressed cake→ extraction

↓

Cleaning oil tank→filter→oil metering→crude oil storage

↓

filter cake

TechnoloLD process of sunflower oil factory :

1. Dehulling process

Cleaned sunflower seeds are crushed into the toothed roll decorticator (two pair). Then oilseeds are squeezed

strongly by the relative rotation of the two fluted rollers with different linear velocity.

Moreover, the alveolus can split and cut the hulls of oilseeds. Thus the dehulling effect will be achieved.

2. Kernel and hull adjustment

The separated sunflower seeds kernel are conveyed into the kernel and hull adjustment screen through the

conveyer scraper, because the higher hull content in the kernel is, the lower protein content in the finished

sunflower meal is. Due to the need of cotton meal with different protein content in the market, the process

is mainly to adjust the hull content in sunflower seeds kernel and process cotton meal with different protein

content.

3.Flaking

The main purpose of flaking is to destroy cell wall within sunflower seeds kernel so that oil within sunflower

seeds kernel can be extracted out.After the process of flaking,the thickness of material will be reduced and

its surfacearea will be increased,which are in favor of moisture penetration and heattransfer towards the

inside of particle in the cooking process.

4. Cooking

After wetting, heating, steaming, frying and other processing, the raw embryos come up complicated physical

chemistry change in its interior and become mature embryos. Thus creating a better condition to extract the

oil, the heat treatment process is called cooking.

5.Pressing process

Embryos after cooking are called cooked flakes,crude oil containing slagsfrom presser is pressed into oil

settling tank through oil scraper blade,after the slag is removed,the crude oil is sent into oil filter tank,and

then itis sent into horizontal screw centrifuge for purification.Pre-pressed cake from oil presser is conveyed

into extraction plant by cakecollecting scraper and cake scraper, and thenenters into the following process.

6. Solvent extraction section introduction of sunflower oil factory :

Extraction process:

1. Solvent pumps: continuously spray solvent to the rotary-type extractor

2. Roary extractor: Spray and soak the pre-pressed cake with solvent so that oil fats can be diss-olved in solvent(form miscella).

After processing, you can get wet meal and miscella (mixed oil).

3. DTDC: usd to separate the solvent from the wet meal.

4. Miscella tank 1st: pump the miscella (oil with solvent) in to the miscella 1st , then add saline

water to it. The phospholipid in the miscella will react with the saline water, at last the reactant precipitate,

reaching the goal of purifying.

5. Miscella tank 2nd: the purified miscella will be pumped into it.

6. Miscella stripping: it will remove the remaining solvent in miscella. And the solvent will be discharged

to condenser for recycling.

7. Condensers: to cooling the solvent gas separated from the wet meal and miscella for recycling.

7.Oil refining workshop of sunflower oil factory

Crude oil - degumming - decolorization - deodorization - deacidification - dewaxing

Requirements for extraction cake ,steam ,water. electricity

1. Who is Leader'E?

a. Leading manufacturer of edible oil mechanical equipment.

b. Factory with more than 30 years manufacturing experience.

c. School-enterprise partner of Shandong TechnoloLD University .

2. What can Leader'E do for you?

a. 5-2000T per day oil seeds press production line.

b. 10-1000T per day solvent extraction production line.

c. 1-600T per day edible oil refinery production line.

3. Where have Leader'E exported to ?

a. Europe:Serbia,Romania.

b. America:Peru,Paraguay,America.

c. Africa:ELDpt,Nigeria,Cameroon,Ghana,Malawi,Burkina faso.

d.Asia:Indonesia,Kazakhstan,Russia,Thailand,Ukrain,Bangladesh,ULDekistan,Pakistan.

SDVVXCC

Edible Oil Filling Line manuctured by Shandong Leader Machinery Co.,Ltd.
Edible Oil Filling Line 10-500T/H oil material first cleaning,drying and storage section turn-key project.
High quality sunflower oil factory 100-3000 T/D oil pretreatment, shelling and pre-press workshop turnkey project (soybean hot peeling, bean skin crushing; the soybean extrusion, high oil contained pre-press cake extrusion, and high oil contained embryos puffed; of direct puffed). High quality sunflower oil factory

KHBHBSSD
Leaching workshop turnkey project Edible Oil Filling Line(Towline extractor, Rotocel extractor, loop type extractor, DTDC separated machine, the full negative pressure evaporation, paraffin wax recovery, leaching workshop degum, phospholipid concentrate).
30-1000T/D oil continuous grade two or one physical (chemical) refining High quality sunflower oil factory.
10-600T/D sunflower oil, rice bran oil, corn germ oil dewaxing turn-key project
10-200T/D Fatty acid esterification production Edible Oil Filling Line.

JHVGCD