Shandong Leader Machinery Co.,ltd. is a commitment to sales of food/chemical products/pharmaceutical disinfection drying Industrial microwave equipment, international trading Company. Our machines are high in automation, environmental protection and enerLD saving. Shandong Leader Machinery Co.,ltd. Owns more than 200 national intellectual property patents, has a professional quality supervision team and a sound management system. Microwave equipment is an emerging industry, many companies do not have quality standards, and we have developed a set of industry standards, and in the relevant regulatory bodies for the record. We have complete supporting facilities, including CNC, CNC bending machine, in line with GB5226 electrical safety standards.
LDjLDvjhfv
As a trustworthy international trading company, Shandong Leader Machinery Co.,ltd. Not only provide high-quality microwave drying sterilization equipment, customized turnkey solution is one-stop service. Procurement advice, floor plans, operational training and life-long free technical support are provided by our professional and technical personnel.
Palm Kernel Oil Extraction Machine
Company Information
Company Profiles:
Shandong Leader'e Grain&Oil Machinery Co.,Ltd is a large-sized joint-equity enterprise which specialize in producing edible oil mechanical equipment and it is also a group enterprise integrating scientific research, manufacturing, sales as one.Research Institute of Machine Design Company and Shandong, Shandong University of TechnoloLD (formerly the Shandong Grain College) school-enterprise cooperation in the oil equipment to carry out long-term, protein extraction, phospholipid extraction, etc. R & D and application of new technologies.
Our company have set up Mechanical Design and Research institution,oil press machine department ,large-sized complete oil equipment department,International trade department,production department.Our business involve in small-sized oil pressing series,Grain and oil engineering designing,equipment manufacturing and installing, project contracting,technical service ,new product development,the intensive and deep processing for oil by-products and so on.
The corporation lies in the High-TechnoloLD Industrial Development Zone of Shandong which is the capital city of Shandong Province. It covers an area of 27000 square meters and contains 12 standardized production workshops,more than 100 sets all kinds of large and middle scale processing,plug welding and assembly equipment,,more than 200 online employee ,among them ,there are exceed 60 administrative staff and engineering technical personnel who hold intermediate and senior professional titles.
Our company have passed ISO9001:2000 international quality management system certification successfully.It has the qualification of manufacturing for one and two types of pressure vessel ,besides,it also has a number of national patents.Since founded in 1982,It has been awarded the "The quality-star enterprise of Shandong province","Model enterprise with High quality, and keeping promises ","3.15quality and reputation double promise enterprise " and so on.Its Body shape"Leader'E" mechanical products have been awarded with"Chinese famous brand products","National Quality trusted consumer products" and many other honored titles.The pennants such as "High technical skills , reliable partners" from our customers are countless
Our Company has grown into Chinese grain and oil machinery production and export base with scientific management method, strives for perfection the manufacturing process, innovative manufacturing idea rapidly , its production and the comprehensive economic indicators lies in the forefront of the same industry line, The products have been sold all over the country and exported to more than 30 countries and regions such as Russia, India, South Africa, Ukraine, Nepal, Indonesia and so on .
Company mission:
Regard quality as the company life ,regard user as the god,mutual benefit and win-win situation with integrity,tenet
Quality oriented, Scientific and technological innovation,Service first, Penguin Piloting
Main business:
10-500T/H oil material first cleaning,drying and storage section turn-key project.
100-3000 T/D oil pretreatment, shelling and pre-press workshop turnkey project (soybean hot peeling, bean skin crushing; the soybean extrusion, high oil contained pre-press cake extrusion,and high oil containedembryos puffed; of direct puffed). Rice bran production line turn-key project.
Leaching workshop turnkey project (Towline extractor, Rotocel extractor, loop type extractor, DTDC separated machine, the full negative pressure evaporation, paraffin wax recovery, leaching workshop degum, phospholipid concentrate).
30-1000T/D oil continuous grade two or one physical (chemical) refining production line.
20-600T/D sunflower oil, rice bran oil, corn germ oil dewaxing turn-key project
10-200T/D Fatty acid esterification production cooking oil production line.
Our Past Performance
palm oil mill craft:
FFB→Sterilization→Threshing(Separate the fruit from the bunch)→Digesting(stirring the fruit)→pressing →Purification → CPO →refinery
Reception of palm oil mill:
1.The FFB bunch be transported to plant by truck, after be weigLDed by weigLDing bridge, the FFB will be loaded down to FFB Loading Ramp.
2.The iron door of unloading ramp is controlled by hydraulic device, Get the power from Hydraulic pump station.
3.Start on the hydraulic device, iron door be lifted.
4.FFB will fall down to the Palm Fruit screw conveyor, be transported to pretreatment plant, to Vertical sterilizer tank.
Weighbridge:
Loading Ramp:
Sterilization of palm oil mill:
Use the high temperature to boil the bunch and sterilize(145°C,90-120min).
1.By Scraper Conveyor, FFB be transported to the top of sterilizing tank. Falling into sterilizing tank from feed inlet.
2.Sterilizing tank: The inside diameter of sterilizing tank is φ2000mm, length 12500mm, welded up by Q235B material(Chemical composition: C012~0.2%, Si0.12~0.3%, Mm0.3~0.7%, P
3.After FFB be transported into sterilizing tank (202), close the door of sterilizing tank, and open the vent valve behind the tank, then saturated steam,which pressure is 3bar and temperature is about 130℃.
4. After all the cooling air have been discharged out,close vent valve, proceed to sterilizing section. Sterilizing time is 55~60minutes.
5. The time of sterilizing is also according the kind of FFB, if the pressure is too high or the time is too long , palm fruit will be rot, also Resulting in the loss of oil, high temperature can change palm color.
6.Finish sterilizing process, close the steam valve, open the valve lead to Blow-off/down Silencer, cant open the sterilizing tank door until discharges out all steam and water.
7. Open the sterilizing tank door, sterilized FFB will fall on the FFB Scraper conveyor. Be transported to next station.
Sterilizer:
Threshing of palm oil mill:
Separate the fruit from the bunch through strong vibrating.
1.The sterilized FFB will be transport to thresher platform by scraper conveyor.
2.We adopt advanced Drum type thresher, insider diameter is φ1800mm, length is 5000mm. The material of main shaft is #45 steel (main chemical composition is C0.42~0.50%, Si0.17~0.37%, Mm0.50~0.30%, P≤0.035%, S≤0.035%, Cr≤0.25%, Ni≤0.25%, Cu≤0.025%).
3.Sterilized FFB be twisted and knocked in thresher. Palm fruit will be separated from empty bunch totally, fall on Fruit Scraper conveyor though fence, the empty bunch will be transported to Bunch Temporary tank by Bunch Scraper conveyor.
Thresher:
Digesting of palm mill:
Stirring the fruit, then digest again.
Pressing of palm oil mill:
Separate the flesh and kernel, get crude palm oil and kernel(no crack-send to the depericarper). And using automatic palm oil press machine.
Screw Press:
Clarification of palm oil mill:
Separate the oil and sludge(get 90% pure oil),the oil contains 45%-55% moisture, sludge and other wastes.
Purification of palm oil press machine and palm oil mill and palm oil machine. Oil purifying treatment-increase the purity.
Other machine:
Tricanter:
Desanding Tank:
BPV:
Turbine:
Kernel Silo:
FAQ
WHY CHOOSE Shandong LeaderE GRAIN&OIL MACHINERY CO.LTD?
1.Our company has been set up since 1982, It has been awarded the "The quality-star enterprise of China"
2.Our factory is also a group enterprise integrating scientific research, manufacturing, sales as one.
3.We have cooperated with Research Institute of Machine Design Company and Shandong, Shandong University of TechnoloLD (formerly the Shandong Grain College) school-enterprise cooperation in the oil equipment to carry out long-term, protein extraction, phospholipid extraction, etc. R & D and application of new technologies.
4.We have more than 200 employees ,among them ,there are 20 engineering technical personnel who hold intermediate and senior professional titles, and two highly reputed professors.
5.We have exported our machines to Moscow, Romania, Pakistan, India, Bangladesh, Thailand, Indonesia, Nigeria, Malaysia, Tunisia, and so on. Our new customers can visit our demo machines in different countries.
CONTACT ME
Any more questions, please contact me without hesitation.
SDVVXCC
Edible Oil Filling Line manuctured by Shandong Leader Machinery Co.,Ltd.
Edible Oil Filling Line 10-500T/H oil material first cleaning,drying and storage section turn-key project.
EnerLD Saving Leader'E Brand oil palm production in nigeria 100-3000 T/D oil pretreatment, shelling and pre-press workshop turnkey project (soybean hot peeling, bean skin crushing; the soybean extrusion, high oil contained pre-press cake extrusion, and high oil contained embryos puffed; of direct puffed). EnerLD Saving Leader'E Brand oil palm production in nigeria
KHBHBSSD
Leaching workshop turnkey project Edible Oil Filling Line(Towline extractor, Rotocel extractor, loop type extractor, DTDC separated machine, the full negative pressure evaporation, paraffin wax recovery, leaching workshop degum, phospholipid concentrate).
30-1000T/D oil continuous grade two or one physical (chemical) refining EnerLD Saving Leader'E Brand oil palm production in nigeria.
10-600T/D sunflower oil, rice bran oil, corn germ oil dewaxing turn-key project
10-200T/D Fatty acid esterification production Edible Oil Filling Line.
JHVGCD