Heat Pump bamboo / basswood / ebony / wood drying machine

Conventional thermal sterilization is carried out through heat conduction, convection or radiation to heat the food surface to the inside. To achieve the sterilization temperature, it often takes a long time. Microwave sterilization is a direct interaction of microwave energy and food and its bacteria. The interaction between heat effect and non thermal effect is faster than temperature and sterilization. The treatment time is greatly shortened, and the sterilization effect of various materials is usually 3-5 minutes.

Heat Pump bamboo / basswood / ebony / wood drying machine of traditional Chinese medicine, also known as microwave traditional Chinese medicine dryer, microwave traditional Chinese medicine drying equipment, microwave medicine drying insecticidal, the same type of industrial microwave equipment, apply to heat-sensitive Chinese medicine, and valuable health herbs such as ginseng and other herbsdrying, sterilization processing.

Tunnel microwave herbs dryer is for drying and sterilizing medicinal materials and pills,for drying and sterilizing and heating materials in strip shape, cube shape,small&round shape,leaves type, powdery form as well as filter cake which have high water content and certain and certain viscosity. It is also used for sterilizing medicinal liquid before and after packing.

Microwave drying and sterilization treatment, the equipment can be opened and used immediately, without thermal inertia of conventional thermal sterilization, flexible and convenient operation, adjustable microwave power, and continuous transmission speed from zero to facilitate operation.

Compared with conventional methods, microwave equipment does not require a boiler, a complex pipeline system, a coal field and a transport vehicle, as long as it has water and basic electrical conditions.
The working environment of the equipment is low and the noise is small, and the working conditions are greatly improved. The operation of the whole set of microwave equipment is only 2-3 people.

Heat Pump bamboo / basswood / ebony / wood drying machine

LD Heat Pump Drying Machine Introduction:

LD heat pump drying oven is a device that transfers heat from a colder area (ambient temperature) to a hotter area (drying chamber) by using mechanical enerLD, as in a refrigerator.

How Does The Drying machine Work?

1, Dryer evaporator of refrigerant absorb the air from outside.

2, Then compressor works that make the air temperature rise.

3, Heat exchanger change the hot air into drying chamber.

4, Final material will be dried by the hot air circulating in drying chamber.

Video link about dryer working principle: LD

Model: JK03RD, JK06RD, JK12RD

Power Supply: 220V/1PH/50HZ or 380V/3PH/50HZ

Type: 75% air source + 25% electric power

Max. Temp: 75℃
Working Temp: -10~45C
Functions: Heating / Cooling / Dehumidify

Dryer Type: Batch Type

Heat Capacity: 200~1500kg per batch

Functions of drying machine:

Heating Drying

Cooling Drying

Heating+Dehumidify Drying

LD Heat pump drying machine has large capacity and easy to operate characteristics.

mainly suitable for dehydrated vegetables, fruits etc.agricultural and sideline products, Chinese herbal medicine as well as chemical materials dry.

LD drying machine consists of a trolley, drying tray, heat exchanger, blower fan, LCD controller cabinet and drying chamber, The entire machine is made of insulation material and stainless steel, fully satisfying food hygiene requirement.

Features Of LD Heat Pump Dryer:

1. Adopt close dehumidify + circulating drying type, saving operating cost;

Without waste gas and waste heat pollution, low noise

2. PLC + Touch Screen, operating easily; can setting different drying curve, Suitable for drying different materials.

3. Second waste heat recovery technoloLD (patent)

Adopt air to air heat exchanger dehumidify and recovery waste heat at the same time, the heat efficiency is high and enerLD is saved.

4. By using the forced ventilation function, there are the adjustable air distribution plates inside the oven. The materials can be dried uniformly.
5. The temperature: hot air heating 10-75°C, max, 75°C.
6. The baking plate dimensions and materials can customize as customer request.

7. During drying, the material does not craze, does not distortions, non-discoloring, never degenerate, non-oxidize, drying completely, with good rehydration, keep nutrient content.

LD heat pump dryer Technical Parameters

Recommend Drying Machine+Drying Chamber:

Warm prompt: We can make different drying chamber sizes for your reference.

Dehydrator Use for :

Dry vegetables lLD Radish, lettuce, pumpkin, carrots, spinach, cassava etc;

Dry fruits lLD Apple, lemon, mango slices, dried longan, dried litchi etc;

Dry meat: fish, Sausage, jery beef, duck, ham ect;

Others it can dry noodle, wooden, stick incense, herbs, flowers ect.

For heat pump dryer parts---with plywood

For drying chamber +trolleys

If shipped with 20ft container or 40ft container, no packing

If shipped with LCL( less than container load), packed in plywood.

We Focus On The LD Heat Pump Dryers More Than 10 years.

Our Services

A. Technical service

1, We calculate the capacity and recommend the LD models.
2, We supply you the professional refrigeration technical support and electronic technical support for your installation, debugging and operation.
3, We supply the spare parts and technical support in & after the warranty time.
4, We supply the training course to your workers at our factory if you need.

B. After-sales service
1, Technical support for your installation, operation and maintenance.
2, One year’s warranty, and you can pay for extended warranty.
3, Spare parts and technical support at most economic prices after the warranty.

If you are interested in our fish drying equipment, please contact us for more information, such as catalogue, video,etc.

LD

Phone: +86+17666509881

Wechat : LX1452458675

WhatsApp : +86+17666509881

Skype: +86+17666509881

Add: Huadu District, LD City, LD Province, P.R. China