Conventional thermal sterilization is carried out through heat conduction, convection or radiation to heat the food surface to the inside. To achieve the sterilization temperature, it often takes a long time. Microwave sterilization is a direct interaction of microwave energy and food and its bacteria. The interaction between heat effect and non thermal effect is faster than temperature and sterilization. The treatment time is greatly shortened, and the sterilization effect of various materials is usually 3-5 minutes.
China factory CE wood sawdust drying machine / wood sawdust dehydrator machine with different capacities of traditional Chinese medicine, also known as microwave traditional Chinese medicine dryer, microwave traditional Chinese medicine drying equipment, microwave medicine drying insecticidal, the same type of industrial microwave equipment, apply to heat-sensitive Chinese medicine, and valuable health herbs such as ginseng and other herbsdrying, sterilization processing.
Tunnel microwave herbs dryer is for drying and sterilizing medicinal materials and pills,for drying and sterilizing and heating materials in strip shape, cube shape,small&round shape,leaves type, powdery form as well as filter cake which have high water content and certain and certain viscosity. It is also used for sterilizing medicinal liquid before and after packing.
Microwave drying and sterilization treatment, the equipment can be opened and used immediately, without thermal inertia of conventional thermal sterilization, flexible and convenient operation, adjustable microwave power, and continuous transmission speed from zero to facilitate operation.
Compared with conventional methods, microwave equipment does not require a boiler, a complex pipeline system, a coal field and a transport vehicle, as long as it has water and basic electrical conditions.
The working environment of the equipment is low and the noise is small, and the working conditions are greatly improved. The operation of the whole set of microwave equipment is only 2-3 people.
China factory CE wood sawdust drying machine / wood sawdust dehydrator machine with different capacities
What is Heat Pump Dryer
A device that transfers heat from a colder area(ambient tempareture) to a hotter area(drying chamber) by using mechanical enerLD, as in a refrigerator.
Various Drying EnerLD Economy Comparison Table
Heating Mode |
Electric heating |
Coal Boller |
Oil-fired Boiler |
Gas Boller |
Biomass Stove |
Regular Heat Pump dryer |
LD Latest Heat Pump Dryer |
| Remove 1kg of water required heat enerLD | According to information provided by the relevant authority of the document, the average 1kg of water to remove heat enerLD required for 1.35 kw/kg,namely 4860 kj/kg |
| Fuel type | Electric |
Coal | Diesel | Gas | Biomass fuels | Electric | Electric |
| Heat value | 3600 kj/kg | 23027kj/kg | 33494 kj/kg | 36006 kj/kg | 17459 kj/kg | 3600 kj/kg | 3600 kj/kg |
| Thermal efficiency | 95% | 30% | 85% | 85% | 90% | 350% | 400% |
| Effective thermal value | 3420 kj/kg | 6906 kj/kg | 28469 kj/kg | 30605 kj/kg | 15713 kj/kg | 12600 kj/kg | 14400 kj/kg |
| Fuel price | 0.1$ /kwh | 0.1$ /kg | 1.2$ /L | 0.8$ /m3 | 0.2$ /kg | 0.1$ /kwh | 0.1$ /kwh |
| Fuel consumption | 1.42kwh | 0.7kg | 0.17L | 0.159m3 | 0.375kg | 0.386kwh | 0.337kwh |
| Labor management, warehousing costs | Higher | High | High | High | Low | Low | Low |
| Safety performance | Unsafe | Unsafe | Unsafe | Unsafe | Safe | Safe | Safe |
| Environmental pollution | None | Very serious | More serious | More serious | LigLD pollution | None | None |
| Life of equipment | 5-8 years | 6-9 years | 6-9 years | 6-9 years | 8-12 years | 10-15 years | 0-15 years |
Heat Pump Dryer Working Principle
1, Dryer evaporator of refrigerant absorb the air from outside.
2, Then compressor works that make the air temperature rise.
3, Heat exchanger change the hot air into drying chamber.
4, Final material will be dried by the hot air circulating in drying chamber.
Main components
LD Heat Pump Dryer Features
√ EnerLD saving&Environmental protection.
Adopt close dehumidify+circulating drying type,saving operating cost;Without waste gas and waste heat pollution,low noise.
√ Running Stable,operating easily.
PLC+Touch Screen,running stable,operating easily;Adopt PLC control,can setting different drying curve, Suitable for drying different materials.
√ Second waste heat recovery technoloLD(patent).
Adopt air to air heat exchanger dehumidify and recovery waste heat at the same time, saving enerLD more than 40%.
√ Exact control temperature and humidity.
According to different material setting different drying curve, the heat pump dryer can control the drying chamber temperature between 20-80℃.
√ Recovery volatilized component.
Some kinds of material contain volatilized component,In drying processing,hot and wet air will become condenser water then drain,collect the condenser water so that collect volatilized component.
Model: JK03RD, JK06RD, JK10RD
Power Supply: 220V/1PH/50HZ or 380V/3PH/50HZ
Heat enerLD: 75% air source + 25% electric power
Max. Temp: 75℃
Working Temp: -10~45℃
Functions: Heating / Cooling / Dehumidify
Dryer Type: 300~2500kg per batch
parameterLD Heat Pump Dryer Parameters
| Single dryer + drying chamber | ||||
| Model | Unit | JK03RD | JK06RD | JK12RD |
| power input | KW | 4.8 | 8.5 | 15.0 |
| power supply | V/PH/HZ | 380V/3PH,50/60HZ | 380V/3PH,50/60HZ | |
| 220V/1PH,50/60HZ | ||||
| Rated current | A | 9.6A(380V),22A(220V) | 17.0 | 30.0 |
| Heating capacity | KW | 10.5 | 21.0 | 42.0 |
| Cooling capacity | KW | 7.8 | 18.0 | 32.0 |
| Dehumidify | L/H | 12.0 | 25.0 | 50.0 |
| Max. temperature | ℃ | ≤75 | ≤75 | ≤75 |
| Working condition | ℃ | 0-43 | 0-43 | 0-43 |
|
Electric shock protection grade |
Ⅰ | Ⅰ | Ⅰ | |
| Max.exhause pressure | MPa | 3.0 | 3.0 | 3.0 |
| Noise | dB(A) | 75 | 75 | 75 |
| Power consumption/H | KWH | 4.8 | 8.5 | 15.0 |
| Electric heater | KW | 3.0 | 6.0 | 12.0 |
| Blowing type | / | HORIZONTAL BLOWING 360° | ||
| Dimension of dryer | MM | 1675×860×1280 | 1760×1060×1280 | 2120×1360×1590 |
| WeigLD | KG | 180 | 285 | 480 |
Drying Chamber Size
| Item | Description | Product Capacity | Drying Chamber size |
| 1 | One unit JK03RD dryer + drying chamber | 300Kg / batch | 4000*2000*2200mm |
| 2 | One unit JK06RD dryer + drying chamber | 600Kg / batch | 6000*2800*2200mm |
| 3 | One unit JK12RD dryer + drying chamber | 1300Kg / batch | 6000*3000*2200mm |
| 4 | Two units JK03RD dryers + drying chamber | 1200Kg / batch | 7000*2200*2200mm |
| 5 | Two units JK06RD dryers + drying chamber | 1500Kg / batch | 10000*2800*2200mm |
| 6 | Two units JK12RD dryers + drying chamber | 3500Kg / batch | 10000*3000*2200mm |
Warm prompt: We can make different drying chamber sizes for your reference.
Dehydrator Use for
Dry vegetables lLD Radish, lettuce, pumpkin, carrots, spinach, cassava etc;
Dry fruits lLD Apple, lemon, mango slices, dried longan, dried litchi etc;
Dry meat: fish, Sausage, jery beef, duck, ham ect;
Others it can dry noodle, wooden, stick incense, herbs, flowers ect.
Company Information
Customers & Us
Certifications
For more details feel free to contact us for more information, such as catalogue, video,etc.
LD
Phone: 008613723539881
WhatsApp : +86+13723539881
Add: Huadu District, LD City, LD Province, P.R. China
Our Services
A. Technical service
1, We calculate the capacity and recommend the LD models.
2, We supply you the professional refrigeration technical support and electronic technical support for your installation, debugging and operation.
3, We supply the spare parts and technical support in & after the warranty time.
4, We supply the training course to your workers at our factory if you need.
B. After-sales service
1, Technical support for your installation, operation and maintenance.
2, One year’s warranty, and you can pay for extended warranty.
3, Spare parts and technical support at most economic prices after the warranty.
1. For heat pump dryer parts---with plywood
2. For drying chamber +trolleys
If shipped with 20ft container or 40ft container, no packing;
If shipped with LCL( less than container load), packed in plywood.