Conventional thermal sterilization is carried out through heat conduction, convection or radiation to heat the food surface to the inside. To achieve the sterilization temperature, it often takes a long time. Microwave sterilization is a direct interaction of microwave energy and food and its bacteria. The interaction between heat effect and non thermal effect is faster than temperature and sterilization. The treatment time is greatly shortened, and the sterilization effect of various materials is usually 3-5 minutes.
China factory wood chips drying oven / plane formula dryer / wood drying machine of traditional Chinese medicine, also known as microwave traditional Chinese medicine dryer, microwave traditional Chinese medicine drying equipment, microwave medicine drying insecticidal, the same type of industrial microwave equipment, apply to heat-sensitive Chinese medicine, and valuable health herbs such as ginseng and other herbsdrying, sterilization processing.
Tunnel microwave herbs dryer is for drying and sterilizing medicinal materials and pills,for drying and sterilizing and heating materials in strip shape, cube shape,small&round shape,leaves type, powdery form as well as filter cake which have high water content and certain and certain viscosity. It is also used for sterilizing medicinal liquid before and after packing.
Microwave drying and sterilization treatment, the equipment can be opened and used immediately, without thermal inertia of conventional thermal sterilization, flexible and convenient operation, adjustable microwave power, and continuous transmission speed from zero to facilitate operation.
Compared with conventional methods, microwave equipment does not require a boiler, a complex pipeline system, a coal field and a transport vehicle, as long as it has water and basic electrical conditions.
The working environment of the equipment is low and the noise is small, and the working conditions are greatly improved. The operation of the whole set of microwave equipment is only 2-3 people.
China factory wood chips drying oven / plane formula dryer / wood drying machine
Product DescriptionLD Heat Pump Drying Machine Introduction:
LD heat pump drying oven is a device that transfers heat from a colder area (ambient temperature) to a hotter area (drying chamber) by using mechanical enerLD, as in a refrigerator.
How Does The Dehydrator Work?
1, Dryer evaporator of refrigerant absorb the air from outside.
2, Then compressor works that make the air temperature rise.
3, Heat exchanger change the hot air into drying chamber.
4, Final material will be dried by the hot air circulating in drying chamber.
Model: JK03RD, JK06RD, JK10RD
Power Supply: 220V/1PH/50HZ or 380V/3PH/50HZ
Type: 75% air source + 25% electric power
Max. Temp: 75C
Working Temp: -10~45C
Functions: Heating / Cooling / Dehumidify
Dryer Type: Batch Type
LD Heat pump drying machine has large capacity and easy to operate characteristics.
mainly suitable for dehydrated vegetables, fruits etc.agricultural and sideline products, Chinese herbal medicine as well as chemical materials dry.
LD drying machine consists of a trolley, drying tray, heat exchanger, blower fan, LCD controller cabinet and drying chamber, The entire machine is made of insulation material and stainless steel, fully satisfying food hygiene requirement.
parameterParameters of wood drying equipment :
| Single dryer + drying chamber | ||||
| Model | Unit | JK03RD | JK06RD | JK12RD |
| power input | KW | 4.8 | 8.5 | 15.0 |
| power supply | V/PH/HZ | 380V/3PH,50/60HZ | 380V/3PH,50/60HZ | |
| 220V/1PH,50/60HZ | ||||
| Rated current | A | 9.6A(380V),22A(220V) | 17.0 | 30.0 |
| Heating capacity | KW | 10.5 | 21.0 | 42.0 |
| Cooling capacity | KW | 7.8 | 18.0 | 32.0 |
| Dehumidify | L/H | 12.0 | 25.0 | 50.0 |
| Max. temperature | ℃ | ≤75 | ≤75 | ≤75 |
| Working condition | ℃ | 0-43 | 0-43 | 0-43 |
|
Electric shock protection grade |
Ⅰ | Ⅰ | Ⅰ | |
| Max.exhause pressure | MPa | 3.0 | 3.0 | 3.0 |
| Noise | dB(A) | 75 | 75 | 75 |
| Power consumption/H | KWH | 4.8 | 8.5 | 15.0 |
| Electric heater | KW | 3.0 | 6.0 | 12.0 |
| Blowing type | / | HORIZONTAL BLOWING 360° | ||
| Dimension of dryer | MM | 1675×860×1280 | 1760×1060×1280 | 2120×1360×1590 |
| WeigLD | KG | 180 | 285 | 480 |
Dehydrator Use for :
Dry vegetables lLD Radish, lettuce, pumpkin, carrots, spinach, cassava etc;
Dry fruits lLD Apple, lemon, mango slices, dried longan, dried litchi etc;
Dry meat: fish, Sausage, jery beef, duck, ham ect;
Others it can dry noodle, wooden, stick incense, herbs, floers ect.
| Recommend Dryer+Drying Chamber Sizes | |||
| Item | Description | Product Capacity | Drying Chamber size |
| 1 | One unit JK03RD dryer + drying chamber | 300Kg / batch | 4000*2000*2200mm |
| 2 | One unit JK06RD dryer + drying chamber | 600Kg / batch | 6000*2800*2200mm |
| 3 | One unit JK12RD dryer + drying chamber | 1300Kg / batch | 6000*3000*2200mm |
| 4 | Two units JK03RD dryers + drying chamber | 1200Kg / batch | 7000*2200*2200mm |
| 5 | Two units JK06RD dryers + drying chamber | 1500Kg / batch | 10000*2800*2200mm |
| 6 | Two units JK12RD dryers + drying chamber | 3500Kg / batch | 10000*3000*2200mm |
Warm prompt: We can make many drying chamber sizes as your require.
Drying cases:
Packaging & Delivery1.For heat pump dryer parts with export standred plywood case.
2.For whole set dryer machine with 20/40FT container.
Company InformationCompany:
LD Kaineng Electric Equipment CO.,Ltd is a professional manufacture for heat pump dryer. Our factory is located in LD Province, near the Baiyun International Airport.
Workshop Corner:
Customers' visiting:
Certifications
Our ServicesA. Technical service
1, We calculate the capacity and recommend the LD models.
2, We supply you the professional refrigeration technical support and electronic technical support for your installation, debugging and operation.
3, We supply the spare parts and technical support in & after the warranty time.
4, We supply the training course to your workers at our factory if you need.
B. After-sales service
1, Technical support for your installation, operation and maintenance.
2, One year’s warranty, and you can pay for extended warranty.
3, Spare parts and technical support at most economic prices after the warranty.
If you are interested in our product , Please contact us for more information.
Crystal, Sales manager
Phone: +86+13723539881
Wechat : LX1452458675
WhatsApp : +86+13723539881
Add: Huadu District, LD City, LD Province, P.R. China