Conventional thermal sterilization is carried out through heat conduction, convection or radiation to heat the food surface to the inside. To achieve the sterilization temperature, it often takes a long time. Microwave sterilization is a direct interaction of microwave energy and food and its bacteria. The interaction between heat effect and non thermal effect is faster than temperature and sterilization. The treatment time is greatly shortened, and the sterilization effect of various materials is usually 3-5 minutes.
Alfalfa Drying Solution Green Feed Production TechnoloLD! of traditional Chinese medicine, also known as microwave traditional Chinese medicine dryer, microwave traditional Chinese medicine drying equipment, microwave medicine drying insecticidal, the same type of industrial microwave equipment, apply to heat-sensitive Chinese medicine, and valuable health herbs such as ginseng and other herbsdrying, sterilization processing.
Tunnel microwave herbs dryer is for drying and sterilizing medicinal materials and pills,for drying and sterilizing and heating materials in strip shape, cube shape,small&round shape,leaves type, powdery form as well as filter cake which have high water content and certain and certain viscosity. It is also used for sterilizing medicinal liquid before and after packing.
Product DescriptionHigh quality horse and animal feeds from grass and alfalfa, both natural forage crops.
The process begins with the crop being cut, this usually takes place just a few hours prior to being needed at the drying plant (this ensures the end dried product is of high quality). A short while after being cut it is turned to allow any excess surface water to evaporate. The next step is to put the crop into a row and it is then harvested with a forage harvester and taken to the drying plant.
A triple pass dryer running at high temperature is used to extract the moisture from the crop, typically reducing moisture content to around 8-15% (initial moisture content varies depending on weather conditions/length of time cut, but would usually be in the region of 65-75%). Once dried it is then milled through fine screens. From here the dried product goes one of two ways. It is packaged in 25kg bags as Meal (coarse flour type consistency), or alternatively it is pelleted.
We offer complete solutions to maintain nutritions of fresh alfalfa during drying process.
The system includes crushers, conveyors, rotary dryers, hot air supply system, dust collecting, milling &pelleting system and packing.
Dryer models and major technical parameters
Model |
Output capacity (t/d) |
Evaporation capacity(t/h) |
Input moisture (%) |
Output moisture (%) |
Drying temp. (℃) |
Power (kw) |
WeigLD(kg) |
Floor area (m2) |
DLSD1208 |
8 |
0.75 |
65±5% |
12% |
350-450℃ |
32 |
15000 |
5m*14m |
DLSD1408 |
11 |
0.90 |
65±5% |
12% |
350-450℃ |
40 |
17000 |
5m*14m |
DLSD1610 |
16 |
1.30 |
65±5% |
12% |
350-450℃ |
55 |
21500 |
6m*16m |
DLTD2010/3 |
37 |
2.90 |
65±5% |
12% |
350-450℃ |
95 |
26500 |
8m*16m |
DLTD2210/3 |
41 |
3.20 |
65±5% |
12% |
350-450℃ |
100 |
28500 |
8m*16m |
DLTD2510/3 |
48 |
3.70 |
65±5% |
12% |
350-450℃ |
125 |
37000 |
10m*16m |
DLTD2512/3 |
59 |
4.50 |
65±5% |
12% |
350-450℃ |
145 |
41000 |
10m*18m |
DLTD2912/3 |
72 |
5.45 |
65±5% |
12% |
350-450℃ |
165 |
45500 |
10m*20m |
1. Free consultation on technical &commercial issues, provide market evaluation, project feasibility based on each customers' condition.
2. Provide free drawings at no cost for factory layout, piping & wiring systeLD, installation plannings,
3. Free installation, commissioning and operation training services at no costs to customers.
4. 24/7 aftersales service, free of charge if repair service required within 1 year after installation.
Related Products
- Spent brewery grains dryer
- Tapioca residue dryer
- Pomace Dryer
- Dewatering Screw Press
- Automatic hot air furnace