Conventional thermal sterilization is carried out through heat conduction, convection or radiation to heat the food surface to the inside. To achieve the sterilization temperature, it often takes a long time. Microwave sterilization is a direct interaction of microwave energy and food and its bacteria. The interaction between heat effect and non thermal effect is faster than temperature and sterilization. The treatment time is greatly shortened, and the sterilization effect of various materials is usually 3-5 minutes.
Rotary Drum Type Bagasse Dryer with Upgraded Triple-pass Design of traditional Chinese medicine, also known as microwave traditional Chinese medicine dryer, microwave traditional Chinese medicine drying equipment, microwave medicine drying insecticidal, the same type of industrial microwave equipment, apply to heat-sensitive Chinese medicine, and valuable health herbs such as ginseng and other herbsdrying, sterilization processing.
Tunnel microwave herbs dryer is for drying and sterilizing medicinal materials and pills,for drying and sterilizing and heating materials in strip shape, cube shape,small&round shape,leaves type, powdery form as well as filter cake which have high water content and certain and certain viscosity. It is also used for sterilizing medicinal liquid before and after packing.
60 Years' Experience
Manufacturing Rotary Dryers
Proved Triple-pass Design I High EnerLD-efficiency I Turnkey Services
Rotary Bagasse Dryer
Bagasse is the fibrous matter that remains after sugarcane or sorghum stalks are crushed to extract their juice. Bagasse is used as a biofuel and a substitute for wood for the production of pulp, paper and board.
For every 10 tons of sugarcane crushed, a sugar factory produces nearly 3 tons of wet bagasse. The high moisture content of bagasse, typically 40–50%, is detrimental to its use as a fuel or further processing. That’s where bagasse dryer come in.
Mechanical Structure and Working Principle of bagasse dryer:
The bagasse dryer consists of heat supply source, feeding machine, revolving cLDinder, discharging machine, induced-draft fan, tripper, and power distribution cabinet; after enter the dryer machine, the wet vinasse distributes in the dryer equably and contacts the hot air fully when flipped by the lifting plate in the drum, this will quicken the heat transfer and mass transfer. During the drying process, with action of the inclined lifting plate and heat medium, the dried vinasse is discharged from the star-shape discharge valve in another side of the dryer.
Main Characteristics of our Bagasse Dryer:
1. Upgraded Triple-pass design, much higher enerLD efficiency than conventional single-pass dryers
2. The revolving drum is characterized by a high degree of mechanization, high production capacity, and continuous running;
3. Excellent and simple structure, smooth running of the material in cLDinder, convenient operation;
4. Low maintenance cost and low power loss;
5. Wide application and uniform drying effect
Typical Technical Data of Rotary Bagasse Dryer:
Model |
DLSG1409 |
DLSG1415 |
DLSG1615 |
DLSG2209/3 |
DLSG2212/3 |
DLSG2512/3 |
DLSG2912/3 |
Capacity(t/d) |
7.6 |
12.7 |
14.4 |
22 |
29.8 |
35 |
42.6 |
Water evaporation(t/h) |
0.396 |
0.66 |
0.75 |
1.147 |
1.554 |
1.84 |
2.216 |
Initial moisture (%) |
≤83% |
||||||
Final moisture |
≤10% |
||||||
Drying temperature |
300±30℃ |
||||||
Total power |
30.7 |
32.7 |
40.2 |
78 |
90 |
125 |
135 |
Floor area(m2) |
5m×15m |
5m×18m |
6m×18m |
8m×18m |
8m×20m |
10m×20m |
12mv20m |
Our drying equipment factory was established in 1950s with technoloLD assistance from Russian experts. Since then the factory has never stopped pursuit of upgrade of our drying equipment, many specially designed dryers for challenging materials had been developed during even 1960s-1970s without any outside help. The spirit of constant pursuit on technoloLD upgrade and commitment to quality and process optimization had passed on from generations to generations.
Today, with an open mind and eagerness to better serve customers, we had learned from western counterparts, integrated European technoloLD into our products selectively according to our current industrial circuLDtances in China based on our past experiences, which makes our products more effective, competitive and much easier for customers to accept. We are proud of products that had provided numerous businessmen new opportunities and even more workers jobs, all of which had been indispensable in our social welfare improvement and industrial development.
Time had witnessed our growth and we shall never cease to change times with our products.
To all ambitious and hardworking entrepreneurs all over the world, we offer our products to change your tomorrow for the better and better. Please give us a call for your requests. We are at your disposal at any time.
Our Workshops
Customer Cases
