Specially Designed Paddle Dryer for Chemical Sludge Drying Turnkey Service!

Conventional thermal sterilization is carried out through heat conduction, convection or radiation to heat the food surface to the inside. To achieve the sterilization temperature, it often takes a long time. Microwave sterilization is a direct interaction of microwave energy and food and its bacteria. The interaction between heat effect and non thermal effect is faster than temperature and sterilization. The treatment time is greatly shortened, and the sterilization effect of various materials is usually 3-5 minutes.

Specially Designed Paddle Dryer for Chemical Sludge Drying Turnkey Service! of traditional Chinese medicine, also known as microwave traditional Chinese medicine dryer, microwave traditional Chinese medicine drying equipment, microwave medicine drying insecticidal, the same type of industrial microwave equipment, apply to heat-sensitive Chinese medicine, and valuable health herbs such as ginseng and other herbsdrying, sterilization processing.

Tunnel microwave herbs dryer is for drying and sterilizing medicinal materials and pills,for drying and sterilizing and heating materials in strip shape, cube shape,small&round shape,leaves type, powdery form as well as filter cake which have high water content and certain and certain viscosity. It is also used for sterilizing medicinal liquid before and after packing.

Paddle dryer is an indirect drying equipment with hollow paddles/blades installed usually in a horizontal hollow axle rotating in a vessel. the wet feed is dried when the rotating paddles stir the materials and resulting in a close contact with the heated paddles and vessel shells. The dryer has a high heating transfer surface and high heat efficiency due to no heat loss in exhaust gas(only heat loss is radiation via heavily insulated dryer vessel, which is very trivial). The paddles are self-cleaning due to relative motion between the wet feed and the wedge-shaped paddles. Paddle dryer can work in batches or continuously, in vacuum, protective atmosphere or pressure conditions according to drying requirements and nature of wet feeds. The heating medium can be thermal oil or hot water with pressure from 0.1 MPa to 0.8 MPa, Steam with pressure up to 1.5 MPa. Working temperature: 40 C to 300 C. Evaporation capacity: 8Kg to 60Kg/m².h

Main features:

1.Low enerLD consumption. Indirect heating, no heat loss due to exhaust gas; minimum heat loss via radiation due to heavily insulated Dryer body. Only 1.2kgs of steam is required to vaporize 1 kg of water.

2. Low manufacturing cost, huge heat transfer area per unit volume, feed dwelling time and dryer sizes can be less, therefore less floor area and smaller workshop is required.

3. Suitable to dry a wide range of materials, heat-sensitive material can be handled with the rigLD heating medium, meanwhile it can also work under high temperature process other materials. Heating medium can be steam, hot water, thermal oil, cold water, etc.. it can work in batches or continuously.

4.minimum environmental pollution: Enclosed process, no fugitive gas

5. low operating &maintenance cost.

Technical Data of paddle dryers

1. Free consultation on technical &commercial issues, provide market evaluation, project feasibility based on each customers' condition.

2. Provide free drawings at no cost for factory layout, piping & wiring systeLD, installation plannings,

3. Free installation, commissioning and operation training services at no costs to customers.

4. 24/7 aftersales service, free of charge if repair service required within 1 year after installation.