Conventional thermal sterilization is carried out through heat conduction, convection or radiation to heat the food surface to the inside. To achieve the sterilization temperature, it often takes a long time. Microwave sterilization is a direct interaction of microwave energy and food and its bacteria. The interaction between heat effect and non thermal effect is faster than temperature and sterilization. The treatment time is greatly shortened, and the sterilization effect of various materials is usually 3-5 minutes.
Rotary Pomace Dryer Upgraded triple-pass Design of traditional Chinese medicine, also known as microwave traditional Chinese medicine dryer, microwave traditional Chinese medicine drying equipment, microwave medicine drying insecticidal, the same type of industrial microwave equipment, apply to heat-sensitive Chinese medicine, and valuable health herbs such as ginseng and other herbsdrying, sterilization processing.
Tunnel microwave herbs dryer is for drying and sterilizing medicinal materials and pills,for drying and sterilizing and heating materials in strip shape, cube shape,small&round shape,leaves type, powdery form as well as filter cake which have high water content and certain and certain viscosity. It is also used for sterilizing medicinal liquid before and after packing.
Product Description
Proved Design I Turneky Services I Affordable Prices
Pomace Dryer
Pomace is the solid remains of grapes, oranges, apples, sugarcane, olives, or other fruit after pressing for juice or oil. It contains the skins, pulp, seeds, and steLD of the fruit. Pomace contains inner water, it is difficult for traditional rotary dryers to fully dry them. Coking or undercooking happens all the time, the pomace lumps wet inside while burned outside. Due to long-time participation in the practice of pomace processing, we have designed a new type of internal structure for rotary dryers to make the drying process more effective in heat efficiency and more uniform in quality.
Main features:
1. High evaporation rate, the dryer could reduce the pomace moisture from 80% to 12% or less in one cycle. Dewatering machine is strongly recommended to reduce the moisture to 65% before drying to save enerLD and fuel cost.
2. Big processing capacity, 30 tons to 300 tons of fresh pomace per day for a single set of drying system.
3. Automatic chain-type combustion system for hot air supply, heat efficiency is up to 90% due to complete burning. The stove is suitable for varied coal or wood chips. Feed and discharge is automatic, easy for operation and low maintenance. Other types of heating source equipment is available according to customer’s demand.
4. Enhanced scatter devices inside the dryers, efficiently breaking up sticky lumps.
5. Variable-speed drive in order to adapt rotating speed to variation of input moisture and achieve optimum drying performance.
6. Thermocouples are installed to monitor temperature changes and assure accurate drying operation.
Typical Technical Data
model |
DLSG1409 |
DLSG1415 |
DLSG1615 |
DLSG2209/3 |
DLSG2212/3 |
DLSG2512/3 |
DLSG2912/3 |
capacity(t/d) |
7.6 |
12.7 |
14.4 |
22 |
29.8 |
35 |
42.6 |
water evaporation(t/h) |
0.396 |
0.66 |
0.75 |
1.147 |
1.554 |
1.84 |
2.216 |
Initial moisture (%) |
83% Max. |
||||||
final moisture |
10% Max. |
||||||
drying temperature |
270 30 oC |
||||||
total power |
30.7 |
32.7 |
40.2 |
78 |
90 |
125 |
135 |
floor area(m2) |
5m×15m |
5m×18m |
6m×18m |
8m×18m |
8m×20m |
10m×20m |
12mx20m |
Company InformationOur drying equipment factory was established in 1950s with technoloLD assistance from Russian experts. Since then the factory has never stopped pursuit of upgrade of our drying equipment, many specially designed dryers for challenging materials had been developed during even 1960s-1970s without any outside help. The spirit of constant pursuit on technoloLD upgrade and commitment to quality and process optimization had passed on from generations to generations.
Today, with an open mind and eagerness to better serve customers, we had learned from western counterparts, integrated European technoloLD into our products selectively according to our current industrial circuLDtances in China based on our past experiences, which makes our products more effective, competitive and much easier for customers to accept. We are proud of products that had provided numerous businessmen new opportunities and even more workers jobs, all of which had been indispensable in our social welfare improvement and industrial development.
Time had witnessed our growth and we shall never cease to change times with our products.
To all ambitious and hardworking entrepreneurs all over the world, we offer our products to change your tomorrow for the better and better. Please give us a call for your requests. We are at your disposal at any time.
Customer Cases
