Petroleum Refinery can be used in black engine oil, crude oil,Pyrolysis oil and shale oil, to get gasoline and diesel oil through distilled catalyst. Pumping into the heater with raw material , through the gas,fuel oil or coal heating to working temperature, the maximum working temperature of Qi'e oil mill machineries, crude sunflower oil processing plant about 410 degree and the required gasoline and diesel oil can be obtained after catalytic distillation. When the reaction of Petroleum Refineryraw material in reactor is complete, stop heating, and remove residue from the tank of bottom, then Qi'e oil mill machineries, crude sunflower oil processing plant can be used again.
Shandong Microwave Machinery Co.,Ltd.Petroleum RefineryIndex of oil after treatment:
Petroleum Refinerydiesel oil : 86-88%, gasoline oil: 5-6%,oil residue: 6-8%.
Petroleum RefineryLow-speed diesel engine can be used directly
Petroleum Refineryperformance characteristics,advantage introduction
LD oil mill machineries, crude sunflower oil processing plant
OILSEEDS PRESSING LINE:
WIDELY APPLIED OILSEEDS:
RAW MATERIAL PREPARATION:
Oilseeds and nuts should be properly dried before storage, and cleaned to remove sand, dust, leaves and other contaminants, Fruits should be harvested when fully ripe, cleaned and handled to reduce bruising and splitting, All raw materials should be sorted to remove stones etc. and especially moldy nuts, which can cause aflatoxin poisoning. When storage is necessary, this should be in weatherproof, ventilated rooms, which are protected against birds, insects and rodents. Some raw materials (for example groundnut, sunflower seeds) need de-husking (or decorticating). Small manual machines are available to give higher production rates than manual de-husking.
DESCRIPTION OF OIL PRESS MACHINE:
The oil press machine is the currently more advanced machinery in oil process with simple
structure, easy operate, low consumption, low noise, high output rate, high adaptability,
continuous work and other characteristics.
ABOUT LARGE SCALE OIL PRESS:
These vegetable oil processing plants are equipped with big capacity, which mostly use in middle-large scale oil plant. They can be divided into two kinds: One is hot processing, which includes steam cooker and oil press. The steam cooker is used for oilseeds pretreatment before pressing. The other one is the cold processing. The advantage of this kind of machine is to press seeds at low temperature. It is about 80 degree, which can protect the nutrition element within the oil.
These oil plants features with large capacity, high oil output, low oil residual, light processed fats color, good quality, rich nutrient.
INSTALLATION SITE:
Still have questions?
What should you do??
Do not worry!
SAM is always here!!
Just Contact SAM!!!
Shandong Microwave Machinery Co.,Ltd.is a Petroleum Refinery factory specializing in the production of Qi'e oil mill machineries, crude sunflower oil processing plant, scientific research,manufacturing,installation, commissioning.Shandong Microwave Machinery Co.,Ltd.can provide Petroleum Refinerycustomers with design and services of 1-2000 tons Qi'e oil mill machineries, crude sunflower oil processing plant. Shandong Microwave Machinery Co.,Ltd. have finished hundreds of successful projects Petroleum Refineryover the years: peanut oil, soybean oil, rapeseed oil, cottonseed oil, sunflower oil, sesame oil, animal oil,grape seed oil, acer truncatum oil, peony seed oil, walnut oil, hemp seed oil, pine oil, tea seed oil, papaya oil, milk thistle seed, and other special type Petroleum Refineryoil. Shandong Microwave Machinery Co.,Ltd. have independent import and export department. Shandong Microwave Machinery Co.,Ltd. Petroleum Refineryequipment has been successfully exported to more than ten countries: Russia, Australia, India, Afghanistan, Cameroon,and so on.
Contact us:
Carrie-Sales manager
Shandong Microwave Machinery Co.,Ltd.
Web: www.epier.com
Email: [email protected]
Skype:leaderfoodmachine10
Moblie:0086-15020017267(also WhatsApp)