Petroleum Refinery can be used in black engine oil, crude oil,Pyrolysis oil and shale oil, to get gasoline and diesel oil through distilled catalyst. Pumping into the heater with raw material , through the gas,fuel oil or coal heating to working temperature, the maximum working temperature of QIE Refined Canola Oil and Vegetable Oil Refine Plant about 410 degree and the required gasoline and diesel oil can be obtained after catalytic distillation. When the reaction of Petroleum Refineryraw material in reactor is complete, stop heating, and remove residue from the tank of bottom, then QIE Refined Canola Oil and Vegetable Oil Refine Plant can be used again.
Shandong Microwave Machinery Co.,Ltd.Petroleum RefineryIndex of oil after treatment:
Petroleum Refinerydiesel oil : 86-88%, gasoline oil: 5-6%,oil residue: 6-8%.
Petroleum RefineryLow-speed diesel engine can be used directly
Petroleum Refineryperformance characteristics,advantage introduction
Specifications
vegetable oil refine plant1.Mature Technology
2.Installation and Training Included
3.High Quality
4.Perfect service
QIE Refined Canola Oil and Vegetable Oil Refine Plant
Specifications
palm oil processing machine
1. The residual
2. Noiseless oil machine
3. Proven techniques
4. Save solvent 98%
1. Introduction
1. Function: palm oil processing machine is an oil extractor through soaking or spraying pre-pressed cake by a certain organic solvent. The principle of this part is the different solubility of solvent.
2.Use range: palm oil processing machine fits for pre-press extraction of high-oil- content materials and direct once time extraction of low-oil-content materials.
3.Main parts: palm oil processing machine series includes rotary extractor, toaster, 1st evaporator, 2nd evaporator, stripping tower, condenser, etc.
Main parts of palm oil processing machine
1. Solvent pumps: continuously spray solvent to the rotary-type extractor.
2. Rotary extractor: spray and soak the pre-pressed cake with solvent so that oil fats can be dissolved in solvent (form miscella). After processing, you can get wet meal and miscella (mixed oil).
3. DTDC: used to separate the solvent from the wet meal.
4.Miscella tank 1st: pump the miscella (oil with solvent) into the miscella 1st, then add 10% saline water to it. The phospholipids and impurities in the miscella will react with the saline water, at last the reactant precipitate, reaching the goal of purifying.
5. Miscella tank 2nd: the purified miscella will be pumped into it.
6.Miscella stripping: it will remove the remaining solvent in miscella. And the solvent will be discharged to condenser for recycling.
7.Condensers: used to cooling the solvent gas separated from the wet meal and miscella for recycling.
3. Main Process
1.The material (for pretreatment) is sent to rotary extraction by the scraper conveyor. The material will extracted by the solvent or mix oil. After this step, we will get meal and mix oil.
2.Meal is send to toaster. Through the toaster, the solvent in the meal will separate from the meal. The solvent goes to condenser and is recycled to rotary extraction.
3.After the mix oil from the rotary extraction enters into 1st evaporator and 2nd evaporator, most of the solvent in the mix oil is separated.
4.The mix oil from 2nd evaporator goes to stripping tower and almost all the solvent is separated. From the stripping tower, we can get crude oil and solvent. The solvent is sent to condenser and is recycled to rotary extraction.
4. Advantages
1.High oil yield, obvious economic benefit.
2. Less residual oil rate in the dry meal.
3.Improving the quality of the meal.
4. Low processing cost, high labor productivity.
The oil quality outcome standard:
1. Grade one for salad oil
2. Grade two for high quality cooking oil
3. Mixture and volatile less than 0.25%.
4. Impurity less than 0.2%.
5. AV (mgKOH/g) less than 7
6. FFA less than 3.5%.
The Pretreatment Machines as follows:
The castor oil refining process flow chart and refining machines as follows:
The Degumming Machine as follows:
The Deacidify Machine as follows:
The Decoloring Machine as follows:
Our Workshop of Plant as follows:
Any Question,Welcome to Contact With Me:
Shandong Microwave Machinery Co.,Ltd.is a Petroleum Refinery factory specializing in the production of QIE Refined Canola Oil and Vegetable Oil Refine Plant, scientific research,manufacturing,installation, commissioning.Shandong Microwave Machinery Co.,Ltd.can provide Petroleum Refinerycustomers with design and services of 1-2000 tons QIE Refined Canola Oil and Vegetable Oil Refine Plant. Shandong Microwave Machinery Co.,Ltd. have finished hundreds of successful projects Petroleum Refineryover the years: peanut oil, soybean oil, rapeseed oil, cottonseed oil, sunflower oil, sesame oil, animal oil,grape seed oil, acer truncatum oil, peony seed oil, walnut oil, hemp seed oil, pine oil, tea seed oil, papaya oil, milk thistle seed, and other special type Petroleum Refineryoil. Shandong Microwave Machinery Co.,Ltd. have independent import and export department. Shandong Microwave Machinery Co.,Ltd. Petroleum Refineryequipment has been successfully exported to more than ten countries: Russia, Australia, India, Afghanistan, Cameroon,and so on.
Contact us:
Carrie-Sales manager
Shandong Microwave Machinery Co.,Ltd.
Web: www.epier.com
Email: [email protected]
Skype:leaderfoodmachine10
Moblie:0086-15020017267(also WhatsApp)