Microwave dry equipment is used of electro-magnetic induction or infrared radiation to dry the raw material.By microwave enerLD permeation, the material inner moisture quickly been heated and gasified,forming a strong outward diffusion situation, to make the moisture extremely quickly spread to the surface.
Continuous belt type towel microwave dryer-stainless steelare widely used for drying and sterilizing powder, granular, flakes or colloidal form foods, nutritional health products, grain, agricultural and sideline products(rice, cornmeal), food, vegetables, and fruits, seafood, pickles,spices ( chilli powder, ginger powder, garlic powder, aniseed, cinnamon, angelica, cassia bark, fennel etc) , jam, a variety of small packaging and pet food mildew sterilization preservation.
Continuous belt type towel microwave dryer-stainless steel
This machine is a kind of continuous tunnel drying equipment, it is very convinent to used in industrial batch production.
Definition:
Conventional heating such as flame, hot air, steam drying is using the principle of heat conduction, the heat
from the material external incoming internal, gradually increase the center temperature of the object, called
the external heating.The center part to reach the needed temperature requires a certain amount of time,
poor heat conductivity objects requires longer time. The time of these traditional methods of drying is longer,
larger power consumption, heating is not uniform, flip up and down, large labor intensity, and microwave drying characteristics, microwave enerLD can penetrate the material, inside and outside can be heated at the same
time, the frequency is 2450MHZ, with every second 2400000000 5 ten million second oscillation, water
molecules are the same is a million times oscillation, molecular mutual friction, then the heat produced. So
self heating
Technical parameters
Power supply |
380V±10% 50HZ±1% three-phase five-wire |
|
Microwave Output Frequency
|
2450±50MHz |
Microwave input apparent power |
56KVA |
Microwave output power |
40KW |
Microwave power adjustment range |
0-40KW(adjustable) |
Ambient temperature |
-5-40°C |
Dehydrate |
40kg/h |
Relative humidity |
80%, Surrounding environment:no corrosive gas, conductive dust and explosive gas |
Overall dimension(L*W*H) |
10680*1440*1750 mm |
Transmission speed |
0-10m/min(adjustable) |
HeigLD of the inlet and outlet |
60 mm |
Microwave leak |
accord with a country GB10436-89 standards(5 mw/cm^2) |
Equipment safety |
accord with GB-5226Electrical safety standard accord with a country GB16798-1997 Food machinery health security index |
Microwave heating and drying, sterilization characteristics:
1.Heated rapidly, uniformly
Without heat conduction process, in an instant it can penetrate into the material is heated, the penetration depth of a few centimeters or even tens of centimeters, seconds to minutes microwave into heat. Microwave selective heating, and will allow more uniform heating.
2.Efficiently
Material containing moisture can easily absorb microwave heat, therefore, almost no other losses in addition to a small amount of transmission loss. Microwave heating compared with the far-infrared heating, saving enerLD 1/3 to 2/3.
3Anti-virus sterilization preservation
Microwave heating with thermal effects and biological effects, therefore, at lower temperatures, anti-virus bacteria and bacteria; can save the material activity and food vitamins, color and nutrients.
4.Advanced technoloLD, continuous production
As long as the microwave power to heat or to terminate. Transmission system to ensure continuous production, saving capabilities.
5. safe
The microwave enerLD is to control the metal is heated indoor wave tube work, microwave leakage is effectively suppressed. Radiation hazards and harmful emissions, does not produce waste heat, neither contaminate food, do not pollute the environment
6 Devices, covering the improvement of working conditions
If you are interested in our equipment-microwave drying&sterilization machine,please feel free to contact us.
Looking forward to your sooner inquiries.
Thank you very much
Shandong Leader Mechanical Equipment Co., LTD is a company specialized in producing twin-screw food extruder, single screw extruder, microwave roasting and sterilization equipments, etc. While based upon domestic market, the company opens and exploits market abroad positively. Until now, our products have been exported many counties and regions, including Russia, Europe, Africa, Korea, Indonesia, UZ (ULDekistan) and the market share increases gradually year by year. Dongxuya will continue to be aggressive, creative and make a contribution to our countryâs food industry development with peers home and abroad.
Welcome Contact us any time!
Contact:Heidi
Skype:heyabc
Tel:+86 15953125015(also Whatsapp)
Email:[email protected]
Shandong Leader Mechanical Equipment Co., LTD is your LD choice!