The qualified decolored oil Screw Hydraulic Oil Press machine enters into the spiral plate heat exchanger to recover most of the heat, and 30T-100TPD China Good Quality coconut oil manufacturing process machine with factory price next goes to high pressure steam heat exchanger to be heated to the process temperature (240-260°C) and then enters the deodorization tower. Shandong Leader Machinery Co.,ltd. The upper layer of combined deodorization tower is the packing structure which Screw Hydraulic Oil Press machine is mainly used to remove the odor producing components such as free fatty acid (FFA); Shandong Leader Machinery Co.,ltd. the bottom layer is the plate tower which is mainly for achieving the hot decoloring effect and reducing the peroxide value of the oil to zero. Screw Hydraulic Oil Press machine Oil from the deodorization tower enters into the heat exchanger to recover most of the heat and makes further heat exchange with crude oil, and then is cooled to 80-85°C through the cooler.
30T-100TPD China Good Quality coconut oil manufacturing process machine with factory price
Product Description
Coconut oil manufacturing process machine introduction :
coconut oil manufacturing process machine including the extraction of pre-pressed cake, miscella evaporation at negative pressure, stripping, wet meal desolventizing, solvent vapor condensation,
vent gas recovery and so on.
1.Extracting of coconut oil manufacturing process machine
The pre-pressed cake, firstly enter into the sealed scraper blade to avoid the solvent gas escaping. Sunflower seeds enter into the extractor counter-currenting with the solvent, the grease is extracted. Miscella condensity increase from 2% to more than 25%. Miscella discharged from extractor,
then into miscella filter, and the leached meal finally drop-in DTDC out from wet meal drag conveyor.
2.Evaporation of coconut oil manufacturing process machine
Using the secondary steam desolventized from DTC desolventizer and produced by steam-jet pump to heat and evaporate micella in the first long-tube evaporator. Export temperature reaches to 58-62℃ and condensity reaches to more than 65%. Then, micella enters into the second long-tube evaporator in which the temperature is heated to 90-95℃ by indirect steam and the condensity reaches to more than 95%. Then miscella enters into stripper in which residual solvent in oil will be removed,
the export temperature reaches to about 105℃ and the general volatile of the extracted crude oil is less than 0.30%.
3.Desolventizing of coconut oil manufacturing process machine
Wet meal in seal scraper blade drop-in DTDC evapo-separated machine through material seal screw for desolventizing, drying and cooling. The machine has eight layers and its flow controlling gate is flexible
and reliable.Desolventizing baiting layer uses seal screw.
4.Condensation recovery of coconut oil manufacturing process machine
Extractor is equiped with a seperate condenser, 1st and 2nd evaporation share one condenser. Low and high temperature of solvent gas both from 1st
and 2nd evaporation enter into the condenser after its neutralization, which greatly reduces the load of condenser and improves the efficiency of condensing.
Stripping and analyzing share one condenser, the non-condensable gases enter into the vent gas recovery system through the final condenser.
In the recycling system, the cold paraffin will absorb the solvent gas and the final nonsolvent gas will be discharged through fire resistance valve.
Paraffin absorbed the solvent gas can be also called rich oil, after heating by oil-oil heat exchanger and steam, the rich oil will enter into desorber for desorption, and into condenser after changing solvent into gas,
the final cooled paraffin can be recycled.
Packaging & ShippingPacking : Packed by the protect film inner, water-repellent plastic outside. The wood packing is necessary if send by less than a container. it will fixed by steel rope in the container.
Make sure it is in good condition when arrived destination.
Shipping : 30 days after receiving your L/C or deposit
Our company
Our Company
XinxiangLD Chemical engineering equipment co,. Ltd is mainly focused on all kinds of pressure vessel and machine manufacturing .It is established in 1978 and has much rich experience in this field .And our LD seller is peanut oil machinery .We produce the complete oil production line ,and sell to all the world ,such America , Middle east ,Africa ,Europe etc.
Click here learn more about our factory :Shandong Leader Machinery Co., Ltd
Contact MeOur factory hope to establish a growing, healthy and mutually beneficial trade relationship with you!
If you are interested in our machine, Please click "SEND" to contact with us, or email me by above information.
Shandong Leader Machinery Co.,ltd. Add the required antioxidant and flavor agent, and then cool the oil below 50°C and store it. Screw Hydraulic Oil Press machine Such volatiles as FFA from the deodorizing system are separated by the packing catcher Screw Hydraulic Oil Press machine, and the separated liquid is FFA at low temperature (60-75°C). When the liquid level in the temporary tank is too high, the oil will be sent to the storage tank 30T-100TPD China Good Quality coconut oil manufacturing process machine with factory price. Our company Shandong Leader Machinery Co.,ltd. has applied the automatic control system Screw Hydraulic Oil Press machine with advancedness, security, reliability into the pretreatment, extraction, refining and fractionation in large oil plants. For 30T-100TPD China Good Quality coconut oil manufacturing process machine with factory price application in automatic control system, Screw Hydraulic Oil Press machine can control the production in the entire workshop and monitor the operational status of each device by controlling the computer terminals in the room. One person only can operate the entire workshop Screw Hydraulic Oil Press machine, with efficient production management. 30T-100TPD China Good Quality coconut oil manufacturing process machine with factory price has reduced the production cost greatly and improved the management efficiency.
If you have any demand about microwave drying equipment and edible oil refining equipment, pls feel free contact us any time.
Email:[email protected]
Whatsapp:+86 13064099546
Skype:leaderfoodmachine21
Contact:Mandy
NOTE:We can specially design the machine according to your production's features.