The qualified decolored oil Screw Hydraulic Oil Press machine enters into the spiral plate heat exchanger to recover most of the heat, and Made in China Commercial 5-600TPD corn oil process with high quality next goes to high pressure steam heat exchanger to be heated to the process temperature (240-260°C) and then enters the deodorization tower. Shandong Leader Machinery Co.,ltd. The upper layer of combined deodorization tower is the packing structure which Screw Hydraulic Oil Press machine is mainly used to remove the odor producing components such as free fatty acid (FFA); Shandong Leader Machinery Co.,ltd. the bottom layer is the plate tower which is mainly for achieving the hot decoloring effect and reducing the peroxide value of the oil to zero. Screw Hydraulic Oil Press machine Oil from the deodorization tower enters into the heat exchanger to recover most of the heat and makes further heat exchange with crude oil, and then is cooled to 80-85°C through the cooler.
Made in China Commercial 5-600TPD corn oil process with high quality
Raw material use for corn oil process
Palm fruit, palm kernel, coconut, cashew, avocado, tiger nut, peanuts, rapeseeds, soybeans, castor oil plant, sesame seeds, benne seeds, sunflower seeds, cotton seeds, tea seeds, Tung seeds and etc.
1. Introduction of corn oil process
1) Function: corn oil extraction machine is an oil extractor through soaking or spraying pre-pressed cake by a certain organic solvent. The principle of this part is the different solubility of solvent.
2) Use range: corn oil extraction machine fits for pre-press extraction of high-oil- content materials and direct once time extraction of low-oil-content materials.
3) Main parts: corn oil extraction machine series includes rotary extractor, toaster, 1st evaporator, 2nd evaporator, stripping tower, condenser, etc.
2. Main parts of corn oil process
1) Solvent pumps: continuously spray solvent to the rotary-type extractor.
2) Rotary extractor: spray and soak the pre-pressed cake with solvent so that oil fats can be dissolved in solvent (form miscella). After processing, you can get wet meal and miscella (mixed oil).
3) DTDC: used to separate the solvent from the wet meal.
4) Miscella tank 1st: pump the miscella (oil with solvent) into the miscella 1st, then add 10% saline water to it. The phospholipids and impurities in the miscella will react with the saline water, at last the reactant precipitate, reaching the goal of purifying.
5) Miscella tank 2nd: the purified miscella will be pumped into it.
6) Miscella stripping: it will remove the remaining solvent in miscella. And the solvent will be discharged to condenser for recycling.
7) Condensers: used to cooling the solvent gas separated from the wet meal and miscella for recycling.
3. Main Process of corn oil process
1) The material (for pretreatment) is sent to rotary extraction by the scraper conveyor. The material will extracted by the solvent or mix oil. After this step, we will get meal and mix oil.
2) Meal is send to toaster. Through the toaster, the solvent in the meal will separate from the meal. The solvent goes to condenser and is recycled to rotary extraction.
3) After the mix oil from the rotary extraction enters into 1st evaporator and 2nd evaporator, most of the solvent in the mix oil is separated.
4) The mix oil from 2nd evaporator goes to stripping tower and almost all the solvent is separated. From the stripping tower, we can get crude oil and solvent. The solvent is sent to condenser and is recycled to rotary extraction.
4. Advantages of corn oil process
1) High oil yield, obvious economic benefit.
2) Less residual oil rate in the dry meal.
3) Improving the quality of the meal.
4) Low processing cost, high labor productivity.
The oil quality outcome standard:
1. Grade one for salad oil
2. Grade two for high quality cooking oil
3. Mixture and volatile less than 0.25%
4. Impurity less than 0.2%.
5. AV (mgKOH/g) less than 7
6. FFA less than 3.5%
corn oil making machine
Our company
If you are interested in our machine, Please click "SEND" to contact with us, or email me by above information.
Shandong Leader Machinery Co.,ltd. Add the required antioxidant and flavor agent, and then cool the oil below 50°C and store it. Screw Hydraulic Oil Press machine Such volatiles as FFA from the deodorizing system are separated by the packing catcher Screw Hydraulic Oil Press machine, and the separated liquid is FFA at low temperature (60-75°C). When the liquid level in the temporary tank is too high, the oil will be sent to the storage tank Made in China Commercial 5-600TPD corn oil process with high quality. Our company Shandong Leader Machinery Co.,ltd. has applied the automatic control system Screw Hydraulic Oil Press machine with advancedness, security, reliability into the pretreatment, extraction, refining and fractionation in large oil plants. For Made in China Commercial 5-600TPD corn oil process with high quality application in automatic control system, Screw Hydraulic Oil Press machine can control the production in the entire workshop and monitor the operational status of each device by controlling the computer terminals in the room. One person only can operate the entire workshop Screw Hydraulic Oil Press machine, with efficient production management. Made in China Commercial 5-600TPD corn oil process with high quality has reduced the production cost greatly and improved the management efficiency.
If you have any demand about microwave drying equipment and edible oil refining equipment, pls feel free contact us any time.
Email:[email protected]
Whatsapp:+86 13064099546
Skype:leaderfoodmachine21
Contact:Mandy
NOTE:We can specially design the machine according to your production's features.