A unified quality management system is a standard that applies to the entire Shandong Leader Machinery Co.,ltd., thereby implementing Drying Equipment quality guidelines into work and products. Shandong Leader Machinery Co.,ltd.'s nine quality guidelines lead employees to work together and run through continuous processes of processes and products.
"We firmly control the quality"
Shandong Leader Machinery Co.,ltd. regularly evaluates and records the quality of work. To determine the measurable quality characteristics, and objectively test compliance. Among them, some characteristic values help to achieve the quality of 130t/h kiln drying wood equipment factory. Eliminate the deviation by means of an effective method. Only when the customer requirements and Drying Equipment quality standards are met, it means that you're done. Because the strong results are the most convincing.
"We cooperate constructively with the right partner"
Many processes are docked with other departments and functions. At this time in urgent need of effective cooperation. Therefore, Shandong Leader Machinery Co.,ltd. attention to open honest, realistic and sincere treat people. Because unity makes us stronger.
Drying Equipment Overview:
Shandong Leader Machinery Co.,ltd.'s 130t/h kiln drying wood equipment factory is a channel-type drying equipment, in addition to the inner layer is all stainless steel structure, the external insulation can be added, channel bracket, etc., strong solid, cost-effective, 130t/h kiln drying wood equipment factory height is generally 2.5 meters, suitable for most For a factory building, the power of the 130t/h kiln drying wood equipment factory is determined by how much water the material needs to be removed. The length of the 130t/h kiln drying wood equipment factory is determined by the process requirements of the material. For example, the maximum temperature the material can withstand can not be higher than 90 degrees Celsius. Under the premise, it must be done wide and long, such as the material temperature can withstand 150 degrees, that 130t/h kiln drying wood equipment factory in the same microwave power under the premise, it should be made narrow and short.
Shandong Leader Machinery Co.,ltd.'s 130t/h kiln drying wood equipment factory uses microwaves at 2450 MHz. After the microwave is excited, it is enclosed in an enclosed space. Under the action of microwaves, the material to be heated moves with the polarity of the water molecule itself, the intense movement of the water molecules and Material friction between each other, so that the material temperature rapidly increased. This is the 130t/h kiln drying wood equipment factory principle. The evaporation of the steam out of the material after the microwave heating equipment becomes a 130t/h kiln drying wood equipment factory.
130t/h kiln drying wood equipment factory Technical parameters:
1, Input Power: Three-phase five-wire 380V ± 10% 50Hz ± 1%
2, microwave output power: 30kW (adjustable)
3, microwave frequency: 2450MHz ± 50Hz
4, rated input apparent power: ≤ 45kVA
5, out of the mouth height: 50mm
6, the transmission bandwidth: 650mm
7, the transmission speed: 0.1 ~ 5m / min
8, Dimensions (L × W × H): about 11630 × 1310 × 1668mm
9, working environment: 0 ~ 40 ℃, relative humidity ≤ 80%
10, 130t/h kiln drying wood equipment factory production: dry dehydration 30kg per hour
11, in line with GB 10436-1989 workplace microwave radiation health standards
13, in line with GB / 5226.1-2002 mechanical safety machinery and electrical equipment
130t/h kiln drying wood equipment factory
Taicheng Mining Machinery Co., Ltd. 10 years of experience in the production kiln drying wood equipment ,all kinds types of machine in stock,welcome to visit our factory
CASES
Product Description
kiln drying wood equipment Technical Parameter:
Specifications(mm) |
Tilt(%) |
Rotate speed(r/min) |
The max. intake air temperature(°C) |
Power(kw) |
Capacity(t/h) |
Weight(kg) |
600x6000 |
3-5 |
3-8 |
â¤700 |
3 |
0.5-1.5 |
2.9 |
800x8000 |
3-5 |
3-8 |
â¤700 |
4 |
0.8-2.0 |
3.5 |
800x10000 |
3-5 |
3-8 |
â¤700 |
4 |
0.8-2.5 |
4.5 |
1000x10000 |
3-5 |
3-8 |
â¤700 |
5.5 |
1.0-3.5 |
5.6 |
1200x10000 |
3-5 |
3-8 |
â¤700 |
7.5 |
1.8-5 |
14.5 |
1200x12000 |
3-5 |
3-8 |
â¤700 |
11 |
2-6 |
14.8 |
1500x12000 |
3-5 |
2-6 |
â¤800 |
15 |
3.5-9 |
17.8 |
1800x12000 |
3-5 |
2-6 |
â¤800 |
18 |
5-12 |
25 |
2200x12000 |
3-5 |
1.5-6 |
â¤800 |
18.5 |
6-15 |
33 |
2200x18000 |
3-5 |
1.5-6 |
â¤800 |
22 |
10-18 |
53.8 |
2200x20000 |
3-5 |
1.5-6 |
â¤800 |
30 |
12-20 |
56 |
2400x20000 |
3-5 |
1.5-5 |
â¤800 |
37 |
18-30 |
60 |
3000x20000 |
3-5 |
1.5-5 |
â¤800 |
55 |
25-35 |
78 |
3000x25000 |
3-5 |
1.5-5 |
â¤800 |
75 |
32-40 |
104.9 |
Any change of technical data shall not be advised additionally.
kiln drying wood equipment Application
The kiln drying wood equipment is widely used for drying the Ore,Gypsum,Vinasse,chalk slags, coal powder, slags, clay and other materials in the building materials, metallurgy, chemical industry, cement industry. you can use coal, gas, electricity, oil and wind power to heat the dryer machine.
kiln drying wood equipment Introduction
Taicheng company can provide a rotary drum dryer for just about any industrial drying application. . We have been installing dryers for many years and have the knowledge and experience required to provide a cost effective drying solution that not only works but works well.
kiln drying wood equipment Working Principle
The raw material plate is arranged conveniently to allow adjustable angle positions. The material to be dried is inserted to the rotary cylinder through the raw material plate. Hot air flows within the cylinder causing the separation of water from the material by converting it into vapor which is discharged into the atmosphere. At this point, the material becomes dry.
kiln drying wood equipment Structure
The kiln drying wood equipment is mainly composed by the revolving body, lifting plate, driving device, supporting device, sealing ring and other components. So it has the advantages of reasonable structure, perfect in workmanship, high yield, low energy consumption, convenient to operate.
kiln drying wood equipment charcteristics :
1. The internal adopts assembled structure which has improved the accuracy of the equipment and it is easy to transport and install.
2. According to the characteristics of different fertilizers ,we have arranged the second granulation zone reasonably so as to improve the granulation effect .
3. Adopts assembled hoist board so as to exchange heat fully and lower the energy consumption .
4. Temperature induction monitor ,uniform vibration and airproof setting , which improve performance and productivity efficiently .
5. The assorted combustion furnace is a type of energy efficient and has the characteristics of smaller area , easy regulation and equipped with greenhouse
FAQ
1.what is the raw material?
2.what is the moisture before drying and after drying?
3.what is the capacity per hour?
4.Heat source? (firewood,coal ,heat gas ,electricity)
5.Where the final dry material used for ?
Packaging & Shipping
Packaging:Standard export containers. Bare main machine, motors and small parts are packed in wooden cases. We can also pack them according to your requirement.
Countact Us
Certifications
Our Services
Service and Solutions Pre-sale services: We can provide you with project design, process design, suitable purchase program for your equipment.Also design and manufacture products based on your specific needs, to train your technical personnel.
Sale: We will accompany you to complete the equipment inspection, construction plan and assist in the development process in detail.After Sale Service: We send technicians to the scene to guide the equipment installation, commissioning and training your operating personnel.
Delivery:
Small machine, we support TNT, DHL, FedEx,UPS.
Big machine, we support delivery by ship.
We can also deliver the machine to your agent in china if you have.
Warranty
1. We guarantee the item is “Brand New”, never been used and in perfect working condition.Every item will be tested carefully before shipping out.
2. Sometimes due to the mishandling in transportation, some parts may loose, the machine will not work properly.In this case, please be patient, we will tell how to do it.
3. How to deal with product damage: if the package arrives in bad condition, please take packaging pictures before unpacking, and check the goods in front of the staff of shipping company, in case it is damaged in transportation due to rude handling. Contact us within 3 days if the product damaged, and please allow time for us to handle with the problems, we will try our best to solve it.
Our service:
1.Machine will be adjusted well before delivery
2.One year warranty:Free replacement of main parts during warranty period.
3.Sending you the user manual for machine installation and operation
4.Free traning and technical support
5.24 hours at your service
Welcome to enquiry!
Our company has engaged in producing and exporting 130t/h kiln drying wood equipment factory for many years, and until now, our machine has exported to overseas market, such as Brazil, India, Indonesia, Russia, Thailand and so on, and get the foreign customers' unanimous praise.
Shandong Leader Machinery Co.,ltd. equipment installation, commissioning of the date of the beginning, 12 months for the quality of warranty, life-long technical services. As the equipment is non-standard equipment, the above is for reference only, welcome new and old customers call us or visit our company directly to discuss cooperation.
We believe that you purchase Shandong Leader Machinery Co.,ltd. 130t/h kiln drying wood equipment factory is your best and sensible choice.
CONTACT:MISS ANNA
TEL: +86 0531 85064681
PHONE: +0086 15764119982(ALSO WHATSAPP & WECHAT)
EMAIL:[email protected]
SKYPE: LEADERFOODMACHINESALES6