soya oil extraction equipment factory,soya oil extraction equipment factory,Oil extraction equipment line

soya oil extraction equipment factory,soya oil extraction equipment

factory,Oil extraction equipment line

1. Process of soya oil extraction equipment factory,soya oil extraction equipment factory,Oil extraction equipment line

Material embryos→Extraction→Wet meal→Evaporation→Cooling→Product meal packing

↓

Mixed oil→Filter→Negative pressure evaporation → Crude oil

↓

Solvent recovery

2. Function of soya oil extraction equipment factory,soya oil extraction equipment factory,Oil extraction equipment line

Leaching system is an oil extraction through soaking or spraying pre-pressed cake by a certain organic solvent. The principle of this part is the different solubility of solvent.

3. Main parts of soya oil extraction equipment factory,soya oil extraction equipment factory,Oil extraction equipment line

a. Solvent pumps: continuously spray solvent to the rotary-type extractor

b. Roary extractor: Spray and soak the pre-pressed cake with solvent so that oil fats can be diss-olved in solvent(form miscella). After processing, you can get wet meal and miscella (mixed oil).

c. DTDC: usd to separate the solvent from the wet meal.

d. Miscella tank 1st: pump the miscella (oil with solvent) in to the miscella 1st , then add saline water to it. The phospholipid in the miscella will react with the saline water, at last the reactant precipitate, reaching the goal of purifying.

e. Miscella tank 2nd: the purified miscella will be pumped into it.

f. Miscella stripping: it will remove the remaining solvent in miscella. And the solvent will be discharged to condenser for recycling.

g. Condensers: used to cooling the solvent gas separated from the wet meal and miscella for recycling.

4. Parameters of soya oil extraction equipment factory,soya oil extraction equipment factory,Oil extraction equipment line

5. Advantages of soya oil extraction equipment factory,soya oil extraction equipment factory,Oil extraction equipment line

a. High oil yield , obvious economic benefit .

b. 1% Residual oil rate in the dry meal .

c. Improving the quality of the meal .

d. Low processing cost , high labor productivity.

6. Certification: