High tech and hot sale vegetable oil extraction machine

Specifications

1. Extraction part

(1) Function: Extracting system is oil extraction through soaking or spraying pre-pressed cake by a certain organic solvent. The principle of this part is the different solubility of solvent.

(2) Use range: Solvent extraction fits for pre-press extraction of high-oil-content materials and direct once time extraction of

low-oil-content materials.

(3) Main parts: The extraction series includes rotary extractor, toaster, 1st evaporator, 2nd evaporator, stripping tower, condenser, etc.

2. Main parts

(1) Solvent pumps: continuously spray solvent to the rotary-type extractor

(2).Roary extractor: Spray and soak the pre-pressed cake with solvent so that oil fats can be dissolved in solvent(form miscella). After processing, you can get wet meal and

miscella (mixed oil).

(3). DTDC: usd to separate the solvent from the wet meal.

(4).Miscella tank 1st: pump the miscella (oil with solvent) in to the miscella 1st , and then add 10% saline water to it.

The phospholipid and impurities in the miscella will react with the saline wter, at last the reactant precipitate, reaching the goal

of purifying.

5). Miscella tank 2nd: the purified miscella will be pumped into it.

(6). Miscella stripping: it will remove the remaining solvent in miscella. And the solvent will be discharged to condenser for

recycling.

(7). condensers: used to cooling the solvent gas separated from the wet meal and miscella for recycling.

3. Main Process

(1) The material (for pretreatment) is sent to extrotor by the scraper conveyor. The material will extracted by the solvent or

mix oil. After this step, we will get meal and mix oil.

(2) Meal is sent to toaster. Through the toaster, the solvent in the meal will separate from the meal. The solvent goes to condenser

and is recycled to rotary extraction.

(3) After the mix oil from the rotary extraction enters into 1st evaporator and 2nd evaporator, most of the solvent in the mix oil is

separated.

(4) The mix oil from 2nd evaporator goes to stripping tower and almost all the solvent is separated. From the stripping tower,

we can get crude oil and solvent. The solvent is sent to condenser and is recycled to rotary extraction.

4 . Advantages

(1) High oil yield , More benefit for you.

(2) Lower Residual in the dry meal .

(3)Better quality of the meal .

(4) Low processing cost , high labor productivity.