Canola oil processing machine
Product DescriptionMain Economic and Technical Parameters of Rotocel Extractor
Capacity |
300T/D |
Residual oil in meal |
≤ 1% |
Solvent consumption |
≤ 2Kg/T (No.6 solvent oil) |
Crude oil moisture and volatile matter |
≤ 0.30% |
Power consumption |
≤ 15KWh/T |
Steam consumption |
≤ 280KG/T (0.8MPa) |
Finished meal moisture |
≤ 13% (adjustable) |
Residual solvent in finished meal |
≤300PPM (qualified detonated experiment |
Method of Canola oil extraction process
1) The material will be have a pretreatment process , we need to clean the canola , crush , cook , flaking , press the canola . the oil residue in the cake is about 7-8 % .this method is suitable for small capacity ,not large .
2) The method is pre -press and solvent extraction method .It means we press the canola first , then the oil residue left is about 12- 13% in the cake . Then we send the cake to extractor to leah the oil from the cake ,which make surethe oil residue is about 1 % . This method is for larger capacity ,and the invest is a little big .
Introduction of oil extraction
1) Function: Leaching system is an oil extraction through soaking or spraying pre-pressed cake by a certain organic solvent. The principle of this part is the different solubility of solvent.
2) Use range: Solvent extraction fits for pre-press extraction of high-oil-content materials and direct once time extraction of low-oil-content materials.
(3) Main parts: The extraction series includes rotary extractor, toaster, 1st evaporator, 2nd evaporator, stripping tower, condenser, etc.
Main parts of canola oil extraction machine
Solvent pumps: continuously spray solvent to the rotary-type extractor
(2).Roary extractor: Spray and soak the pre-pressed cake with solvent so that oil fats can be dissolved in solvent(form miscella). After processing, you can get wet meal and miscella (mixed oil).
(3). DTDC: usd to separate the solvent from the wet meal.
(4). Miscella tank 1st: pump the miscella (oil with solvent) in to the miscella 1st , and then add 10% saline water to it.
The phospholipid and impurities in the miscella will react with the saline wter, at last the reactant precipitate, reaching the goal of purifying.
(5). Miscella tank 2nd: the purified miscella will be pumped into it.
(6). Miscella stripping: it will remove the remaining solvent in miscella. And the solvent will be discharged to condenser for recycling.
(7). condensers: used to cooling the solvent gas separated from the wet meal and miscella for recycling.
Refinery Process
Crude canola oil - degumming ( remove phosphilid ) - decolorization ( remove pigment ) - deodorization ( remove odour )
Company Information
Company Image
welcome to order from us