Plam,Fresh Fruit Bunches press plant
Our company has more than 30 years experience in oil and grain machine manufacturing technique.
1.Technology Process Specification:
The palm oil is contained in palm pulp,the pulp is high moisture content and rich lipase.Usually we adopt the method of press to produce it,and this technology is very mature.Before press,Fresh fruit bunch will be taken sterilizer and thresher pretreatment : After weighting the FFB,it is loaded the FFB conveyor by loading ramp,then the FFB will convey to the vertical sterilizer. FFB will be sterilized treatment in sterilizer, the FFB will be heated and sterilized treatment for several time to avoid the lipase be hydrolyzed,after sterilizer,the FFB is distributed bunch conveyor by the mechanical bunch feeder and enter the thresher machine which separate the palm fruit and bunch,for the empty bunch ,it is conveyed empty bunch loading platform and transport it to outside the factory area at fixed period , the empty bunch could be used as fertilizer and repeat us;The palm fruit which has passed sterilizer and thresher processing should be sent to digester and then go to special screw press to get the crude palm oil (CPO) from the pulp . But the pressed palm oil contain a lot of water and impurity which need to be clarified by sand trap tank and treated by the vibrating screen,afterward the CPO will be sent to clarification station treatment section.For the wet fibre cake which be produced by screw press,after separating nut,it will be sent to boiler house to burnt.The wet fibre cake contain wet fibre and wet nut, the fibre contain about 6-7% oil and fat and a few of water.Before we produce the nut,we should separate the nut and fibre.Firstly,the wet fibre andwet nut enter the cake
breaker conveyor to be cracked and mostly of the fibre should be separated by pneumatic fibre depericarper System.The nut,little fibreand big impurity will be further separated by the polishing drum.The separated nut should be sent to nut hopper through the pneumatic nut transport system, and then adopt the ripple mill to crack the nut,after cracking,most of the shell and kernel will be separated by cracked mixture separating system,and the rest of mixture of kernel & shell enter to the special clay bath separating system to separate them,after this processing,we could get pure kernel(The shell content in kernel
After screen and sand trap tank, the palm oil should be sent to crude oil tank and heat , then be pumped continuous clarification tank to separate the purified oil which be sent to pure oil tank and the sludge oil which be sent to sludge tank , whereafter the sludge oil should be pumped to the centrifuge to separate, the separated oil enter the continuous clarification tank again; The pure oil in the pure oil tank should be sent to the oil purifier , and then enter the vacuum dryer , at last the dried oil should be pumped collection tank.
2. Plam,Fresh Fruit Bunches output
3. The certification:
Pls contact me without hesitation if you have any questions and requirements.