1TPD-10TPD cold press oil machine for neem oil

The main function of Small Scale Edible Oil Refinery decoloring process is to remove oil pigment, residual soap grain and metal ions. Under negative pressure, 1TPD-10TPD cold press oil machine for neem oil the mechanical mixing method combined with steam mixing will improve the decoloring effect. Shandong Leader Machinery Co.,ltd. The degummed oil firstly enters into the heater to be heated to the appropriate temperature (110°C), and then Small Scale Edible Oil Refinery goes to the bleaching earth mixing tank. 1TPD-10TPD cold press oil machine for neem oil The bleaching earth is delivered from the low bleaching box to the temporary tank by wind. The bleaching earth is added by automatic metering and is interlockingly controlled with the oil. Small Scale Edible Oil Refinery The oil mixed with the bleaching earth overflows into the continuous decolorizer, which is stirred by non-powered steam.Shandong Leader Machinery Co.,ltd. The decolored oil enters into the two alternate leaf filters to be filtered.

1TPD-10TPD cold press oil machine for neem oil

cold press oil machine for neem oil

1, cold press oil machine for neem oil brief introduction

6YY-230 oil cold press machine can press sesame, copra, peanut, rapeseed, soybean, walnut,

almong, and so on. It uses high quality metal material such as 45# steel and 27SiMn steel forgings.

With lower power consumption and noise, it can be fed with 7-8Kg of material every time

and complete squeeze in 6-8 min. the equipment may squeeze at any time easily and make edible oil

for users at ease.

2, cold press oil machine for neem oil technical parameters

Professional sesame oil cold press machine

3, cold press oil machine for neem oil advantage

Inside this professional sesame oil cold press machine, the main hydraulic driving parts are made up

of driving worm, turbine, bent axle, high-pressure pump, gear pump, one-way valve,

hydraulic cylinder, hydraulic tube, and so on. Combining domestic and overseas advanced

technology, we have designed hydraulic triple plunger pump station. It has high, stable

pressure and can produce more oil.

np

don

Company Information

Our Strength

1, Established in 1982, we have more than 30 years experience. Our goal is to be pioneer in global grain and oil

industry.

2, We have deep cooperation with Shandong Machine Design Research Institute and Shandong University of

Technology. Our professor often go abroad attending grain and oil conference and forum.

3, We have completed service line including technical department, engineering department, project department,

electronic commerce department, domestic trade department and foreign trade department. After signing

contract, we will set up special team including engineers, installation technicians, drawing designer,

business person, after-sales service person, and so on. We will provide one-to-one service.

Our Service

• Whole set of equipment for production line.

• Motor and power control system.

• Installation material.

• Installation and test-run.

• Drawing of process description, equipment layout, foundation and

  hole, construction.

• Drawing of power control.

• Isolation and painting for equipment.

• Water recycling and cooling system outside the plant (i.e. supplementary device).

• Staff training and long-term technical service.

Main Business Field

• 10-500T/H oil material primary cleaning,drying and storage section turn-key project.
• 100-3000 T/D oil pretreatment, shelling and pre-press workshop turnkey project (soybean hot dehulling, bean skin crushing, the soybean extrusion, high oil contained pre-pressed cake extrusion and high oil contained flakes puffed directly). Rice bran turn-key project.
• 100-3000 T/D leaching workshop turnkey project (towline extractor, rotocel extractor, loop type extractor,
• DTDC separated machine, the full negative pressure evaporation,
• Paraffin wax recovery, leaching workshop degumming, phospholipid concentration).
• 30-1000T/D continuous physical (chemical) refining line.
• 20-3000T/D sunflower oil, rice bran oil, corn germ oil dewaxing turnkey project.
• 10-200T/D fatty acid esterification edible oil production line.

Packaging & Shipping

Our Certificates

Shandong Leader Machinery Co.,ltd. Add the required antioxidant and flavor agent, and then cool the oil below 50°C and store it. Small Scale Edible Oil Refinery Such volatiles as FFA from the deodorizing system are separated by the packing catcher Small Scale Edible Oil Refinery, and the separated liquid is FFA at low temperature (60-75°C). When the liquid level in the temporary tank is too high, the oil will be sent to the storage tank 1TPD-10TPD cold press oil machine for neem oil. Our company Shandong Leader Machinery Co.,ltd. has applied the automatic control system Small Scale Edible Oil Refinery with advancedness, security, reliability into the pretreatment, extraction, refining and fractionation in large oil plants. For 1TPD-10TPD cold press oil machine for neem oil application in automatic control system, Small Scale Edible Oil Refinery can control the production in the entire workshop and monitor the operational status of each device by controlling the computer terminals in the room. One person only can operate the entire workshop Small Scale Edible Oil Refinery, with efficient production management. 1TPD-10TPD cold press oil machine for neem oil has reduced the production cost greatly and improved the management efficiency.

If you have any demand about microwave drying equipment and edible oil refining equipment, pls feel free contact us any time.
Email:[email protected]
Whatsapp:+86 13064099546
Skype:leaderfoodmachine21
Contact:Mandy

NOTE:We can specially design the machine according to your production's features.